Академический Документы
Профессиональный Документы
Культура Документы
System
Hardware Description 12 Cables
12 Cables
2 mm multi-mode fiber
2 mm multi-mode fiber
Fiber Connectors
The following figures show two common types of fiber connectors: LC/PC connector and
FC/PC connector.
LC/PC
connector
Protective cap
Protective cap
FC/PC connector
Cable Diagram
Technical Specifications
2.5 mm2 power Power cable, 450 Common terminal, single cord end terminal,
cable and V/750 V, H07Z-K, 2.5 mm2, 12.5 A, tin plating, insertion depth of
terminal 2.5 mm2, blue/black, 8 mm, blue
low smoke zero
halogen cable
NOTE
For the OptiX OSN 500, power cables with a 2.5 mm2 cross-sectional area can extend for a maximum
distance of 50 meters.
Cable Diagram
X2 W1
A 1
Label 1 2
W2
X1
X3
Pin Assignments
Technical Specifications
Cable connector Bare crimp terminal, single core end terminal, 2.5 mm2
X1
Number 1
of cores
Fireproof VW-1
class
Cable Diagram
Cable Diagram
Pin Assignments
None.
Technical Specifications
Item Description
Cable model Coaxial cable, 75-ohm, 3.9 mm, 2.1 mm, 0.34 mm, shielded
Core diameter Diameter of the shield layer (3.9 mm), diameter of the internal
insulation layer (2.1 mm), diameter of the internal conductor
(0.34 mm)
Length 10 m
Fireproof class CM
12.6 E1 Cable
An E1 cable uses Anea 96 connectors and can transmit a maximum of 16 E1 signals.
There are two types of E1 cables: 75-ohm coaxial cables and 120-ohm twisted pair cables.
NOTE
Cable Diagram
Main label
X1 A
ViewA Pos.96
Cable connector, Anea,
96-pin,female
Pos.1
Pin Assignments
Table 12-5 provides details about the pin assignments for a 75-ohm E1 cable.
Pin Cor Seri Lab Pin Cor Seri Lab Pin Cor Seri Lab
e al el e al el e al el
No. No. No.
10 Ring 22 Ring
34 Ring 46 Ring
12 Ring 24 Ring
36 Ring 48 Ring
Table 12-6 provides details about the pin assignments for a 120-ohm E1 cable.
26 Or 40 Or 78 Or
ang ang ang
e e e
Ri Pi Co La Re Ri Pi Co La Re Ri Pi Co La Re
bb n lor bel lat bb n lor bel lat bb n lor bel lat
on of io on of io on of io
Co the ns Co the ns Co the ns
lor Co hi lor Co hi lor Co hi
re p re p re p
4 Gr 18 Gr 56 Gr
een een een
28 Br 42 Br 80 Br
ow ow ow
n n n
5 Wh R2 Pai 19 Wh R9 Pai -
ite r ite r
6 Gr 20 Gr
ay ay
29 Re T2 Pai 43 Re T9 Pai
d r d r
30 Blu 44 Blu
e e
7 Re R3 Pai 21 Re R1 Pai
d r d 0 r
8 Or 22 Or
ang ang
e e
31 Re T3 Pai 45 Re T1 Pai
d r d 0 r
32 Gr 46 Gr
een een
9 Re R4 Pai 23 Re R1 Pai
d r d 1 r
10 Br 24 Br
ow ow
n n
33 Re T4 Pai 47 Re T1 Pai
d r d 1 r
34 Gr 48 Gr
ay ay
Ri Pi Co La Re Ri Pi Co La Re Ri Pi Co La Re
bb n lor bel lat bb n lor bel lat bb n lor bel lat
on of io on of io on of io
Co the ns Co the ns Co the ns
lor Co hi lor Co hi lor Co hi
re p re p re p
12 Blu 50 Blu
e e
36 Or 74 Or
ang ang
e e
14 Gr 52 Gr
een een
38 Br 76 Br
ow ow
n n
Technical Specifications
Table 12-7 lists the technical specifications for E1 cables used on the OptiX OSN 500.
Table 12-7 Technical specifications for 16xE1 cables used on the OptiX OSN 500
Item Description
The NMS/COM port and Ethernet electrical service ports of the equipment support the auto-MDI/MDI-
X mode. Therefore, straight-through cables and crossover cables can be used to connect the NMS/COM
port and Ethernet electrical service ports to MDIs or MDI-Xs.
Cable Diagram
1. Network port connector, RJ45 2. Label 1 3. Main label 4. Network cable 5. Label 2
Pin Assignments
Technical Specifications
Item Description
Connector X1/X2 Network port connector, RJ45 connector, 8-pin, 8-bit, shielded,
connector, 24 to 26 AWG, CAT 6/configured with the SFTP network
cable
Fireproof class CM