Академический Документы
Профессиональный Документы
Культура Документы
ZA
_______________________________________________________________________________________________
Please make sure that when you start a new project on the server you start by saving the Linea Template as your project.
Linea Design
Current
Alterations and additions
00.000 Linea Template
As-Built Drawings and folders
All PDF’s + DWG files of the drawings are to be saved as follows:
- Street number + Street Name_Drawing Type_Drawing label
-e.g: 21 Victoria Road_As Built_Floor Plan
21 Victoria Road_Land Survey
21 Victoria Road_Council Submission_Elevations
____________________________________________________________________________________________________________________
All dimensioned
Ground Floor to be marked as LD FFL 0 000 unless Linea has done the L/S. Then use the correct floor level
All construction lines to be shown on the drawing until I have had the final check and I am happy. (Only then can they be deleted before printing)
Show the position of the roof trap door on the top floor plan
2 X section lines
Street names
UC = Underside of ceiling
Show the position of all gulleys, vent pipes, stacks and sanitary fittings (W.C, baths, shower, etc.)
1
Show ceiling heights, beam heights and bulkhead heights
P
A Floor to sill = ws
Show site plan with North Point and scale (to be checked on google earth)
All roof types to be hatched accordingly and labeled as well as an indication of the angle
LD FFL – Linea Datum Finished Floor Level – Ground floor 0 000 work up or down from that
LD FFL + Title Block (on all Plans) as well as foundation note and boundary note (in a red rectangle)
Lazer image sometimes does not print (please double check after printing )
Please ensure that the Linea logo and details print correctly in colour
Client, Project details and dates, scales and revision numbers to be checked before drawings are handed in
Use the “=” equal sign and not the “-“ hyphen sign, when referring to heights of doors, beams, windows, sills etc. (The “-“ hyphen sign could be
Heights dimensioned
All construction lines to be shown on the drawing until I have had the final check and I am happy. (Only then can they be deleted before printing)
LD FFL is very important unless we have L/S drawings. Indicate the LD FFL Line in red as per the template
Street names
ERF number
Ground level line in thick , bold blue showing the underlying earth
2
Roof angle and type on all Sections and Elevations
Lazer image sometimes does not print (please double check after printing )
Client, Project details and dates, scales and revision numbers to be checked before drawings are handed in
Notes on drawings regarding below soil = footings and surface beds to be on all Sections and Elevations showing footings etc
*NOTE: All illustrations below ground level are based on logical assumption to be confirmed by Structural Engineer
*NOTE: The roof construction is based on logical assumptions as access was not possible at the time of survey
All NGL and contours are to be determined from the L/S drawings. Our NGL line to follow these contours in Sections and Elevations
Elevation photographs to correspond with A/B Elevations (Photo’s printed for checking of the drawing)
SIGN:________________________________________________
DATE:________________________________________________