Академический Документы
Профессиональный Документы
Культура Документы
In the Tree View browse to the ELET1/EPOI1 or ETOP1 unit and Port 1.
Select Main and Port Type
In the table change the Usage to PWAC and confirm with the ‘flash’ button
(PWAC = Pseudo Wire Attachment Circuit)
If you are using ETOP1, then select Main and SFP on the same Port 1 and select in the
Type Configuration the same SFP type that is displayed in Type Status.
1. Node 3
2. Node 4
1. Node 3
2. Node 4
E. Test network
Connect Ethernet testers (or PCs) to run a throughput measurement (or PINGs) between
the following pairs of ports:
Node 3 ELET1/EPOI1 or ETOP1 unit and Port 1: Node 4 ELET1/EPOI1 or ETOP1 unit and
Port 1