Академический Документы
Профессиональный Документы
Культура Документы
INDUSTRY
General
Nos
More paliers
than s’alignent…
35 years of experience
sur toutes vos attentes.
SNR has been a leading manufacturer of The bearings are equipped with a high-per-
housed bearings for more than 35 years formance seal and filled with grease
and thus has a large pool of experience in suitable for use in the food industry (USDA
a very diverse range of applications in many H1 standard).
industrial areas.
SNR stainless steel ball bearing units are
In this catalogue you will find the SNR stan- primarily intended for use in areas where
dard range for stainless steel ball bearing moisture or aggressive media seriously
units. degrade the service life of conventional ball
bearing units made of cast iron and bear-
ing inserts made of chrome steel, and thus
Housings and bearing inserts for these units render them uneconomical.
are manufactured from stainless steel.
Although great care was taken during the preparation of this publication, we cannot accept any responsibility for any mistakes or omissions.
Subject to technical change.
SNR Industry
Contents Page
1. General
Foreword ................................................................................................ 2
2. Dimension tables
3. Range
INDUSTRY
Applications
Nos paliers s’alignent…
sur toutes vos attentes.
SUCP205CO
Size d= 25 mm
4
SNR Industry
Housing body
AISI 304,
stainless steel
INDUSTRY
Technical data
Set screw
SUC Insert
Housing
Shaft
SNR Industry
6
SNR Industry
INDUSTRY
Technical data
SNR Industry
8
SNR Industry
INDUSTRY
INDUSTRY
Pillow block unit
Housing SP200 with grease fitting
Bearing insert SUC 200 with set screws
open closed
SCO SCC
d d L J B H H1 H2 S A N N1 Z max. Dz
[mm] [inch]
SNR Industry
10
SNR Industry
open closed
SCO SCC
INDUSTRY
INDUSTRY
Tapped base pillow block units
Housing SPA 200 with grease fitting
Bearing insert SUC 200 with set screws
open closed
SCO SCC
d d L J B H H1 H2 S A N T Z max Dz
[mm] [inch]
SNR Industry
12
SNR Industry
open closed
SCO SCC
d d L J B H H1 H2 S A N T Z max Dz
[mm] [inch]
INDUSTRY
INDUSTRY
Flanged bearing units
General
Four-bolt flanged housing SF 200 with grease fitting
Bearing insert SUC 200 with set screws
open
SCO
with protective
cap
closed
SCC
Shaft diameter
metric inch SUCF200
12 - 60 mm 3/4 - 2 7/16
d d L J B A A1 A2 S T N Z max Dz
[mm] [inch]
SNR Industry
14
SNR Industry
open
SCO
with protective
cap
closed
SCC
d d L J B A A1 A2 S T N Z max Dz
[mm] [inch]
INDUSTRY
INDUSTRY
Flanged bearing units
General
Two-bolt flanged housing SFL 200 with grease fitting
Bearing insert SUC 200 with set screws
open
SCO
with protective
cap
closed
SCC
d d L J H B A A1 A2 S T N Z max Dz
[mm] [inch]
SNR Industry
16
SNR Industry
open
SCO
with protective
cap
closed
SCC
d d L J H B A A1 A2 S T N Z max Dz
[mm] [inch]
INDUSTRY
INDUSTRY
Take-up unit
General
Housing ST 200 with grease fitting
Bearing insert SUC 200 with set screws
Shaft diameter
metric inch
12 - 50 mm 3/4 - 2 SUCT200
d d L H A B A1 A2 E S L1 L2
[mm] [inch]
SNR Industry
18
SNR Industry
19
open closed
SCO SCC
SUCT200 with protective cap
Insert Housing
L3 L4 L5 N H1 H2 Z max. Dz
INDUSTRY
INDUSTRY
Take-up unit
General
Housing ST 200 with grease fitting
Bearing insert SES 200 with eccentric locking collar
Shaft diameter
metric inch
12 - 50 mm 3/4 - 2 SEST200
d d L H A B A1 A2 E S L1 L2
[mm] [inch]
SNR Industry
20
SNR Industry
21
open closed
SCO SCC
SUCT200 with protective cap
Insert Housing
L3 L4 L5 N H1 H2 Z max Dz
INDUSTRY
INDUSTRY
Bearing inserts
General
SUC200
Standard design with 2 set screws and
lubrication holes in the outer ring
Shaft diameter
metric inch
12 - 60 mm 3/4 - 2 7/16
d d D B S r min C T G Cr Cor n
[mm] [inch] [dyn] [stat] [rpm]
SNR Industry
22
SNR Industry
Bearing inserts 23
SES200
Standard design with eccentric locking collar
and lubrication holes in the outer ring
Shaft diameter
metric inch
12 - 60 mm 3/4 - 2
INDUSTRY
SNR ball bearing unit range
The grey cast iron and stamped steel housings can be combined with
numerous bearing inserts to obtain, the optimal type of fastening of the
bearing insert to the shaft (adapter sleeve, eccentric locking collar, sets-
crew or floating bearing). The designer can thus find the best solution in the
SNR standard range for ball bearing units.
The bearing units are used, among other areas, in the food and pharma-
ceutical industries with their high demands on hygiene and corrosion
resistance of the materials used. For this reason all ball bearing units are
lubricated with grease in accordance with the USDA H1 standard.
Currently this standard places the most stringent requirements on the
hygiene and purity of the materials used in the lubricant.
SNR Industry
24
SNR Industry
25
Notes
INDUSTRY
Notes
SNR Industry
26
Europe
FRANCE - EUROPE SNR Bordeaux 1, rue du Golf - B.P. 173 Tél. 05 56 34 69 80
33708 Merignac Cedex Fax. 05 56 34 69 81
SNR Paris 40, rue Jean Bleuzen
B.P. 49 Tél. 01 40 93 66 00
SNR Lyon Le Florentin - 71, chemin Tél. 04 78 66 68 00
92174 Vanves Cedex Fax. 01 40 93 66 10
Europe* du Moulin Carron - B.P. 8 Fax. 04 78 66 68 20
69570 Dardilly
SNR Logistique 9, avenue Léon Harmel Tél. 01 46 11 66 50
92160 Antony Fax. 01 46 11 66 66
SNR Nancy 3, allée Forêt de la Reine Tél. 03 83 44 64 00
Europe* Parc technologique Brabois Fax. 03 83 44 02 31
54500 Vandœuvre
DEUTSCHLAND ITALIA
33719 Bielefeld Friedrich-Hagemann-Str.66 Tel. (0521) 9 24 00-0 Bologna Via E.Zago, 2/2 Tel. (051) 36 79 46
33701 Bielefeld Fax. (0521) 9 24 00 90 40128 Bologna (051) 36 29 78
Postfach 17 01 45 Fax (051) 36 85 38
Amériques / Americas
USA AMERICA LATINA
SNR Bearings USA www.snrbearings.com SNR Argentina
Atlanta 4600 K Highlands Pkwy Tel. (770) 435-2818 Buenos Aires Viamonte 1145 - Piso 11 Tel. (54) 11-4 372-1272
Smyrna, G.A. 30082 (800) 232-1717 1053 Buenos Aires Fax. (54) 11-4 372-0088
Fax. (800) 742-5215
Annecy 18, rue du Val-Vert Tél. (33) 4 50 65 96 00/01/02 SNR Maroc e-mail : info@snr.ma
74600 Seynod Fax. (33) 4 50 65 96 15 Casablanca 73, Bd Moulay Slimane Tél. (212) 22 66 76 80
France Ain Sebaâ CASABLANCA Fax. (212) 22 66 51 66
B.P 15873 CASA-PRINCIPAL
- © SNR 2003 -
INDUSTRY
TC 08 GBa