Академический Документы
Профессиональный Документы
Культура Документы
Medium Intensity
Omnidirectional
Elevated Light
A.02.160e
Uses
Features FIG. 2
Finish
Electrical Supply
Photometric Performance
Lamp: 6,6A - prefocus halogen - Gy 9,5
Rated life at full intensity: see table.
Lamp Performance FIG. 4
ABI-H Wattage Life Peak Average Vetical beam spread
White Light W hours Intensity Intensity over 360°
Cd Cd horizontal
Notes:
1. For red light, multiply above figures by 0,15. (This value can vary depen-
ding on the density of the glass pressing)
2. Due to the filament shape, the intensity figures vary over the 360° horizon-
tal beam angle. Figures given are maxima.
Installation
Ordering Data
ABI-H, Red/white*
Lamp 30, 45,120 or 150W - 6,6A*
Mounting:
ground mounting (supplied with breakable coupling and
cable fitted with 2-pole plug FAA L-823 style 1)*
Packing Data
FIG. 8 FIG. 9
Suggested Specification
The Approach, Medium lntensity,
Omnidirectional Elevated Light shall be
in compliance with Annex 14 for use in
a simple approach lighting system.
The prefocus halogen lamp shall be
150W - 6,6A or less and its rated life
at full intensity shall not be less than
500 hours. No adjustment shall be
required at relamping which shall not
require the use of any tool. The pris-
matic dome shall be through coloured
for the red light A polychloroprene gas-
ket shall ensure the watertightness
between the glass dome and the
body. The light design shall allow for
an easy levelling and for its installation
either on a breakable coupling, on
lightweight conduit or on a safety
approach mast. All components shall
be suitably protected against corrosion
and plain stainless steel hardware
shall be used throughout.