Академический Документы
Профессиональный Документы
Культура Документы
KAMAZ Foreign Trade Company Incorporated - subsidiary of KAMAZ PTC engaged in the export
of KAMAZ PTC products and sales and service development abroad
The manufacturer reserves the right to change specifications without any notice.
This edition is an advertisement and may not be considered as a normative document
KAMAZ PTC
2018
Contents About KAMAZ PTC 4
Components of KAMAZ trucks and buses
Cab 8-15
Engine 16-20
Transmission 21-24
Frame, suspension, front axle 25
Trucks
Chassis 28-54
Tractor units 55-67
Trucks application
Construction, mining industry 70-73
Municipal operations 74-75
Petrochemical, oil & gas industry 76-77
Crew buses 78-79
Fire-fighting 80-81
Logging 82-83
Agricultural sector 84-85
Lift vehicles 86-87
Technical aid, laboratories 88-89
Logistics 90-99
Motor vans and trailer trucks 90-91
Drop-side trucks and (semi-) trailer trucks 92-93
Dump trucks and (semi-) trailer trucks 94-95
Tank trucks and (semi-) trailer trucks 96-97
Lowboy trucks and (semi-) trailer trucks 98-99
Passenger transport
Bus chassis 102-107
Buses 108-112
Electrical buses 113
Chassis and tractor unit models index 114
Contents 3
KAMAZ background
KAMAZ Publicly traded company (KAMAZ PTC) is the largest manufacturer of heavy trucks and buses in Russia.
The company has been on the market for more than 40 years. Its main production facilities and the headquarters
are located in Naberezhnye Chelny, Russia.
The 1st The 1,000,000th The 1st city bus The 2,000,000th vehicle Manufacture of new
vehicle vehicle genera on vehicles
1969 1976 1988 1990 2000 2002 2005 2008 2010 2011 2012 2013 2015-2020
4
Achievements Strategic partnership
Development of components
џ Model line-up of medium-duty and heavy-duty trucks meeting Brake gears,
ZF (Zahnrad Fabrik)
Euro-2 to Euro-6 emission standards
transmission gearboxes torsion dampers
џ More than 50% of the Russian market share, since 2015 JV ZF KAMA JV KNORR-BREMSE KAMA
џ Manufacturing capabilities of KAMAZ Group:
– foundry and forging, press-forging and framing;
– KAMAZ engine factory, drivetrain components
manufacture (gearboxes, clutches, axles); Cylinder-piston group
Cummins engines JV FEDERAL MOGUL
– manufacture of special vehicles, trailers and semi-trailers, JV CUMMINS KAMA
buses (NEFAZ); NABEREZHNYE CHELNY
– production of concrete mixers and concrete pump trucks
(Tuimazy Cement Mixer Truck Plant)
Manufacturing capabilities: ®
Lift vehicles
JV DAIMLER KAMAZ RUS JV KRAN CENTER KAMAZ
5
+7-8552-45-27-45 | www.kamaz.ru 5
Componens of
KAMAZ trucks
and buses
+7-8552-45-27-45 | www.kamaz.ru
7
Cab
Three generations of KAMAZ cabs
1) Classic C1 C2 C3
2) Restyling R, RS 3) Advanced A
C1 classic cab, metal counter-buffer,
headlights on the cab
C2 classic cab, reinforced-plastic lower
frame crossmember, for all KAMAZ vehicles
C3 classic cab, plastic lower frame
crossmember for heavy vehicles and some
road vehicles (optional: headlights on the cab
such as C1)
R restyling cab without an air suspension
RS restyling cab with an air suspension
А cab mounted on Daimler component parts
8
Cab’s overall dimensions
Classic (C1, C2, C3), Restyling (R, RS)
Day Cab (no sleepers) Sleeper Cab (one sleeper) High Sleeper Cab (two sleepers)
630
1360
1535 1
(1980 3)
1935
535
1535
1980
1980
2304
2304
2080
2304
2080
2080
600 600
(600 3)
370 450
370 450
370 450
15802 1980 1980
Advanced (A)
Day Cab (no sleepers) Sleeper Cab (one sleeper) High Sleeper Cab (two sleepers)
680
1315
(1950 3)
1955
1510
525
1950
1510
1950
2280
2280
2000
2280
2000
2000
710 645
(645 3)
The given sketches do not reflect real design features of the KAMAZ cab and serve only as demonstration of overall dimensions
1
Low top cab is also available for order, height - 1420 mm. Used for truck craness.
2
Type C1 cabs have a protruded metal counterbuffer which extends the cab length by approx. 200-300 mm
3
Dimensions of the upper (lower) sleeper
The spherical mirror improves overlook and The front reinforced-plastic counter-buffer is The triple wind-screen wiper cleans more than
excludes blind spots. (C3) highly impact-resistant and contributes 90% of windscreen area. (C3)
to passive safety. (C2)
Powerful headlights and fog lamps provide good Foot boards are outfitted with safety treads. The front plastic bumper is made of
visibility in challenging weather conditions. (C3) (C3) impact-resistant plastic. (C3)
10
Classic cab. Interior.
The new mirrors system. Bottom view and curb The windscreen sunscreen prevents sunbeams New headlights improve visibility.
view mirrors precluding dead areas have been from penetrating into the cab and heating Head, marker and turning lights are located in
added. the windshield and cab interior. one block.
Safety treads provide for safe ascending of a driver New facing panel. Air cowlings thereon direct Counter-buffer facing made of impact-resistant
into cab. the air flow so that grab handles remain clean. plastic provides passive safety and protects from
strokes and wear alike.
12
Restyling cab. Interior.
Heated mirrors are equipped with an electric drive. The sunscreen ensures traffic safety. A new head optical system is equipped with
inbuilt daytime running lights.
Foot boards are outfitted with safety treads. Air cowlings directing the air flow below the level Side skirts optimise the air flow. Improved
of grab handles keep the latter clean even aerodynamics reduces the fuel consumption rate.
in foul weather.
14
Advanced cab. Interior.
to UN regulations Euro-2
Emission class 3 (EC-3)
№49-02, emission level B
№96-01
Engines installed on KAMAZ vehicles and buses are certified as per Technical
Regulations of Eurasian Customs Union «On wheeled vehicles safety» and Euro-3 №49-04, emission level A
UN regulations on emissions of toxic (contaminating) substances with exhaust Emission class 4 (EC-4) №96-02
gases, complying with the environmental standards from Euro-2 to Euro-6, incl. as Euro-4 №49-05, emission level B1
per special emission classes 3 and 4 (EC-3 and EC-4 in the catalogue,
Euro-5 №49-05, emission level B2
respectively) in effect in the Eurasian Economic Union (EEU) countries:
Euro-6 № 49-06
KAMAZ engines
Specifications Specifications
Model Displace- Model Displace-
Fuel Layout Nominal power Peak torque Fuel Layout Nominal power Peak torque
ment, l ment, l
Euro-2, EC-3 Euro-4
740.31-2401 D V8 10.857 176 kW (240 hp)@2200 rpm 932 Nm@1300 rpm 740.70-280 D V8 11.762 206 kW (280 hp)@1900 rpm 1177 Nm@1300 rpm
740.30-2601 D V8 10.857 191 kW (260 hp)@2200 rpm 1079 Nm@1300 rpm 740.71-320 D V8 11.762 235 kW (320 hp)@1900 rpm 1373 Nm@1300 rpm
740.55-3001 D V8 11.762 221 kW (300 hp)@2200 rpm 1177 Nm@1400 rpm 740.72-360 D V8 11.762 265 kW (360 hp)@1900 rpm 1570 Nm@1300 rpm
740.51-3201 D V8 11.762 235 kW (320 hp)@2200 rpm 1275 Nm@1400 rpm 740.73-400 D V8 11.762 294 kW (400 hp)@1900 rpm 1766 Nm@1300 rpm
740.50-3601 D V8 11.762 265 kW (360 hp)@2200 rpm 1470 Nm@1400 rpm 740.74-420 D V8 11.762 309 kW (420 hp)@1900 rpm 1864 Nm@1300 rpm
740.35-4001 D V8 11.762 294 kW (400 hp)@2200 rpm 1570 Nm@1400 rpm 820.60-260 G V8 11.762 191 kW (260 hp)@2200 rpm 1079 Nm@1400 rpm
740.37-4001 D V8 11.762 294 kW (400 hp)@1900 rpm 1766 Nm@1300 rpm 820.61-260 G V8 11.762 191 kW (260 hp)@2200 rpm 932 Nm@1400 rpm
Euro-3 820.62-300 G V8 11.762 221 kW (300 hp)@2200 rpm 1226 Nm@1400 rpm
740.65-240 D V8 11.762 176 kW (240 hp)@1900 rpm 981 Nm@1300 rpm 820.63-320 G V8 11.762 235 kW (320 hp)@2200 rpm 1373 Nm@1400 rpm
740.62-280 D V8 11.762 206 kW (280 hp)@1900 rpm 1177 Nm@1300 rpm Euro-5
740.61-320 D V8 11.762 235 kW (320 hp)@1900 rpm 1373 Nm@1300 rpm 740.705-300 D V8 11.762 221 kW (300 hp)@1900 rpm 1177 Nm@1300 rpm
740.60-360 D V8 11.762 265 kW (360 hp)@1900 rpm 1570 Nm@1300 rpm 740.715-320 D V8 11.762 235 kW (320 hp)@1900 rpm 1373 Nm@1300 rpm
740.63-400 D V8 11.762 294 kW (400 hp)@1900 rpm 1766 Nm@1300 rpm 740.725-360 D V8 11.762 265 kW (360 hp)@1900 rpm 1570 Nm@1300 rpm
740.64-420 D V8 11.762 309 kW (420 hp)@1900 rpm 1864 Nm@1300 rpm 740.735-400 D V8 11.762 294 kW (400 hp)@1900 rpm 1766 Nm@1300 rpm
EC-4 740.745-420 D V8 11.762 309 кВт (420 hp)@1900 rpm 1864 Nm@1300 rpm
740.652-260 D V8 11.762 191 kW (260 hp)@1900 rpm 1128 Nm@1300 rpm 740.755-440 D V8 11.762 324 kW (440 hp)@1900 rpm 2060 Nm@1300 rpm
740.622-280 D V8 11.762 206 kW (280 hp)@1900 rpm 1177 Nm@1300 rpm 820.90-260 G V8 11.762 191 kW (260 hp)@2200 rpm 1079 Nm@1500 rpm
740.662-300 D V8 11.762 221 kW (300 hp)@1900 rpm 1275 Nm@1300 rpm 820.91-260 G V8 11.762 191 kW (260 hp)@2200 rpm 932 Nm@1500 rpm
740.612-320 D V8 11.762 235 kW (320 hp)@1900 rpm 1373 Nm@1300 rpm 820.92-300 G V8 11.762 221 kW (300 hp)@2200 rpm 1226 Nm@1500 rpm
740.602-360 D V8 11.762 265 kW (360 hp)@1900 rpm 1570 Nm@1300 rpm 820.93-320 G V8 11.762 235 kW (320 hp)@2200 rpm 1373 Nm@1500 rpm
740.632-400 D V8 11.762 294 kW (400 hp)@1900 rpm 1766 Nm@1300 rpm D - diesel; G - natural gas
1
740.642-420 D V8 11.762 309 kW (420 hp)@1900 rpm 1864 Nm@1300 rpm depending on UN Regulation №49-02В or №96-01 which cover transport, the engine shall comply
with the emission standard Euro-2 or emission class 3 (EC-3), respectively.
Gross horsepower is presented in the table for Euro-2, EC-3 engines, for the rest - net horsepower (max. net capacity), i.e. gross horsepower deducted by the power consumed by the cooling fan.
16
КАМАZ engines
Torque, Nm
Power, hp
Torque, Nm
Power, hp
400
Euro-2 engines 2100
740.31-240
740.30-260
Euro-4 engines 450 2300 740.70-280
740.71-320
740.51-320
2100 740.72-360
350 1900
740.50-360 400
740.35-400 740.73-400
1900
740.37-400 740.74-420
300 1700 350
740.75-440
Torque 1700
1500 Torque
Power 300
250 1500
Power
1300
250 1300
200
1100 1100
200
150 900
900
150
700
KAMAZ 740.31-240 100
700
KAMAZ 740.73-400
100 500
1000 1200 1400 1600 1800 2000 2200 900 1100 1300 1500 1700 1900
Rotational speed, rpm Rotational speed, rpm
Torque, Nm
Power, hp
Power, hp Torque, Nm
Euro-3 engines 450 2300 740.65-240 Euro-4/5 engines (gas) 350 1600 820.60-260
820.61-260
740.62-280
1400
2100 820.62-300
400 740.61-320 300
740.60-360 820.63-320
1900 1200
350 740.63-400 820.90-260
250
1700 740.64-420 820.91-260
1000
300 820.92-300
Torque
1500
200 800 820.93-320
Power
250 1300
600 Torque
150
200
1100 Power
400
900
150 100
200
700
100
50 0
ISB6.7 275 D R6 6.7 205 kW (275 hp)@2500 rpm 990 Nm@1500 rpm 100 200
200
ISB6.7 300 D R6 6.7 219 kW (300 hp)@2500 rpm 1100 Nm@1700 rpm 50
QSX15-560 D R6 14.9 418 kW (568 hp)@1800 rpm 2365 Nm@1400 rpm
50 0
QSX15-600 D R6 14.9 447 kW (608 hp)@2100 rpm 2542 Nm@1400 rpm 0 0
1000 1200 1400 1600 1800 2000 2200 2400 1000 1200 1400 1600 1800 2000 2200 2500
Euro-4 Rotational speed, rpm Rotational speed, rpm
ISB4.5e4 185 D R4 4.5 132 kW (180 hp)@2500 rpm 700 Nm@1200-1600 rpm
ISB4.5e4 185B D Р4 4.5 136 kW (185 hp)@2300 rpm 700 Nm@1200-1600 rpm
ISB6.7e4 245 D R6 6.7 180 kW (245 hp)@2300 rpm 950 Nm@1200-1800 rpm
ISB6.7e4 270B D R6 6.7 188 kW (257 hp)@2100 rpm 970 Nm@1200-1700 rpm
ISB6.7e4 300 D R6 6.7 221 kW (298 hp)@2500 rpm 1100 Nm@1300-1800 rpm Euro-5, 6 engines
ISLe400 40 D R6 8.9 294 kW (400 hp)@2100 rpm 1700 Nm@1400 rpm
Power, hp Torque, Nm
Euro-5 500 2500
ISB4.5E5 185 D R4 4.5 136 kW (185 hp)@2300 rpm 700 Nm@1200-1500 rpm
450 ISBe4.5E5 185 (Euro-5)
ISB4.5E5 185B D Р4 4.5 136 kW (185 hp)@2300 rpm 700 Nm@1200-1800 rpm
ISB6.7E5 210B D R6 6.7 149 kW (202 hp)@2300 rpm 787 Nm@1300 rpm ISBe6.7E5 300 (Euro-5)
400 2000
ISB6.7E5 250 D R6 6.7 178 kW (242 hp)@2500 rpm 937 Nm@1300 rpm ISL8.9E5 400 (Euro-5)
350
ISB6.7E5 250B D R6 6.7 175 kW (238 hp)@2300 rpm 1007 Nm@1300 rpm ISB6.7E6 310 (Euro-6)
ISB6.7E5 285 D R6 6.7 204 kW (278 hp)@2500 rpm 1007 Nm@1300 rpm 300 1500
ISB6.7E5 300 D R6 6.7 215 kW (292 hp)@2500 rpm 1087 Nm@1300 rpm Torque
250
ISL8.9E5 400 D R6 8.9 294 kW (400 hp)@2100 rpm 1700 Nm@1400 rpm Power
200 1000
Euro-6
ISB6.7Е6 260 D R6 6.7 194 kW (263 hp)@2300 rpm 1000 Nm@1100-1800 rpm 150
ISB6.7Е6 290 D R6 6.7 217 kW (295 hp)@2300 rpm 1100 Nm@1200-1800 rpm
100 500
ISB6.7Е6 320
L9E6 C370
D
D
R6
R6
6.7
8.9
239 kW (325 hp)@2300 rpm
276 kW (378 hp)@2100 rpm
1200 Nm@1100-1800 rpm
1600 Nm@1400 rpm 50
Cummins
ISL9Е6 400 D R6 8.9 298 kW (405 hp)@2100 rpm 1695 Nm@1400 rpm
0 0
ISB6.7Е5300
700 1000 1200 1400 1600 1800 2000 2200 2500
D - diesel
Gross horsepower is presented in the table Rotational speed, rpm
18
Daimler engines
Specifications Specifications
Model Model
Fuel Layout Displacement,I Nominal power Peak torque Fuel Layout Displacement,I Nominal power Peak torque
OM 457 LA.III/9 D R6 11.9 315 kW (428 hp)@1900 rpm 2100 Nm@1100 rpm M 906 LAG. EEV/1 G R6 6.8 205 kW (279 hp)@2200 rpm 1000 Nm@1300 rpm
Euro-5 OM 457 LA.EEV/3 D R6 11.9 295 kW (401 hp)@1900 rpm 2000 Nm@1100 rpm
OM 457 LA.V/2 D R6 11.9 295 kW (360 hp)@1900 rpm 1850 Nm@1100 rpm OM 457 LA.EEV/4 D R6 11.9 315 kW (428 hp)@1900 rpm 2100 Nm@1100 rpm
OM 457 LA.V/3 D R6 11.9 295 kW (401 hp)@1900 rpm 2000 Nm@1100 rpm
OM 457 LA.V/4 D R6 11.9 315 kW (428 hp)@1900 rpm 2100 Nm@1100 rpm
400
2000
350
M906LAG
150
Torque
100
500
Power
50
0 0
1000 1200 1400 1600 1800 2000 2200 2400
Daimler OM 457 LA.V/4 Rotational speed, rpm
Euro-5
Power, kW Torque, Nm
350 2000 WP7NG260E51
WP5NG180
1800
300 WP12NG400E50
1600
Torque
250 1400 Power
1200
200
1000
150
800
100 600
400
50
200
0 0
800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100
20
Transmission
Gearbox for buses
ZF gearboxes Voith gearboxes Allison gearboxes
џ Manual / automatic gearshift џ Automatic gearshift џ Automatic gearshift
џ Input torque 1000 – 1300 Nm џ Input torque 1100 Nm џ Inbuilt retarder
џ Number of gears - 6 џ Number of gears - 4 џ Number of gears - 6
D854.5E,
6S1310BO D854.3E T270R
Specifications
Make Model
Type Input torque, Nm Number of gears Gear ratio Weight, kg
ZF Ecolite 6S700TO manual 700 6 6.02-0.79 109
ZF Ecolite 6S1200BO manual 1200 6 6.75-0.83 181.5
Voith D854.3E / D854.5E automatic hydraulic power 1100 4 6.2 - 0.7 355
12AS2130TO
Specifications
152 Make Model Input Number
Gear ratio
Weight,
torque, Nm of gears kg
ZF Ecolite 6S700TO 700 6 6.02-0.79 109
ZF Ecomid 6S1000TO 1000 6 6.75-0.18 134
ZF Ecomid 9S1310TO 1300 9 9.48-0.75 198
ZF Ecomid 9AS1310TO 1300 9 9.48-0.75 198
ZF Ecomid 9S1315TO 1300 9 9.48-0.75 205 HD4500R
2
Specifications ZF Ecomet 6HP602 1600 6 5.60-0.83 376
Make Model Input Number Gear Weight, ZF Ecosplit 16S1820TO 1850 16 13.8-0.84 300 Specifications
torque, Nm of gears ratio kg ZF Ecosplit 16S1822TO 1850 16 13.8-0.84 370
Make Model Input Gear
ZF Ecosplit 16S1821TO3 1850 16 13.8-0.84 381 Number Weight,
5.62- torque,
КАМАZ 141 850 5 250 of gears ratio kg
0.724 ZF Ecosplit 16S1825TO 1850 16 13.8-0.84 305 Nm
КАМАZ 142 850 5 7.82-1 250 ZF Astronic 12AS1931TO1,3 1900 12 12.33-0.78 332 4.7-
ZF Astronic 12AS2130TO
1
2100 12 12.33-0.78 254 Allison HD4500R 2508 6 479
0.67
КАМАZ 144 1100 5 7.82-1 250 ZF Astronic 12AS2130TD
1
2100 12 15.86-1.00 258
ZF Astronic 12AS2131TD1,3 2100 12 15.86-1.00 334 4.7-
7.82- Allison 4440P 1716 6 447
КАМАZ 152 850 10 330 0.67
0.815 ZF Astronic 12AS2135TD1 2100 12 15.86-1.00 339
7.82- ZF Ecosplit 16S2220TO 2200 16 13.8-0.84 328 Gearbox type: automatic
КАМАZ 154 1100 10 330
0.815 ZF Ecosplit 16S2220TD 2200 16 16.41-1.00 332
3
Gearbox type: manual gearshift ZF Ecosplit 16S2221TO 2200 16 13.8-0.84 409
3
ZF Ecosplit 16S2221TD 2200 16 16.41-1.00 413
ZF Ecosplit 16S2225TO 2200 16 13.8-0.84 330
Gearbox type: manual gearshift, apart from marked (1) and (2)
1
automated
22 2
automatic, hydraulic power
3
with intarder
Clutch Transfer case
KAMAZ clutch KAMAZ transfer case
џ Design – twin-plate џ Remote pneumatic (model 65111)
with coil springs and electro-pneumatic (model
џ Driven disc diameter 6522) transmission shift control
350 mm and lock-out mechanism
џ Torque: 833 Nm џ PTO installation is possible
on the top hatch (only 65111)
and input shaft, take-off from
the top (only 65111) and the rear
142 65111
ZF clutch
ZF transfer case
џ Design – single-plate,
diaphragm
џ Remote electro-pneumatic
transmission shift control and
џ Driven disc diameter - 362, lock-out mechanism
395, 430 mm
џ PTO installation from the input shaft
џ Torque: 700-2100 Nm is possible, take-off from the rear
MFZ-430 VG2000/300
Specifications Specifications
Compatibility with Gear ratio
Make Model Size, Make Model Input Weight, Applicability in vehicles
Type Torque, Nm gearboxes (highest /
mm torque, Nm kg
lowest)
џ alternative design with final drives of the following types: hypoid, central double and 568 /
hub-reduction (central reduction gear with planetary hub drives located by the driving KAMAZ 43114
2
front rear / rear C 7000 4.98-7.22
560
43114
wheel) 2
KAMAZ 4350 rear C 7000 4.98-7.22 563 4326, 43502
595 /
KAMAZ 53205 front rear / rear C 8000 4.98-7.22 53215, 54115
560
KAMAZ-65115 KAMAZ 43081 rear H 8000 3.9-4.78 570 4308
driving axle
2 597 / 43118, 5350, 53504,
with central double KAMAZ 43118 front rear / rear C 8000 4.98-7.22
560 63501
final drive 630 /
KAMAZ 65111 front rear / rear C 9500 4.98-7.22 65111
598
Specifications 65115, 65116, 65117,
Axle Applicability KAMAZ 65115 front rear C 9500 4.98-7.22 625
Make 6540
model Final Axle Weight, in KAMAZ vehicles
Type Gear ratio KAMAZ 65115 rear C 9500 4.98-7.22 590 65115, 65116, 65117
drive load, kg kg
2 KAMAZ 6540 rear C 9500 4.98-7.22 577 6540
KAMAZ 43114 front C 5200 4.98-7.22 640 43114,4326,43502
2
KAMAZ 43253 rear C 9500 4.98-7.22 576 43253, 43255, 43265
KAMAZ 43118 front C 5600 4.98-7.22 650 43118
6460, 6520, 6520 Luxe,
KAMAZ 635012 front C 5600 4.98-7.22 642 53504, 63501 885 / 65201, 65201 Luxe, 6580,
KAMAZ 6520 front rear / rear R 13000 5.11; 6.33
KAMAZ 63501 2
2nd front C 5600 4.98-7.22 668 63501 760 65801, 65806
KAMAZ 65111 front C 5600 4.98-7.22 650 65111, 43265 895 / 6522, 6522 Luxe, 65225,
KAMAZ 6522 front rear / rear R 13000 5.11; 6.33
KAMAZ 6522 front R 8000 5.11; 6.33 820 6522,65225,65228, 6522 Luxe 770 65226, 65228
KAMAZ 6560 front R 8000 5.11; 6.33 790 6560, 65224 KAMAZ 53605 rear R 13000 5.11; 6.33 760 53605
KAMAZ 6560 2nd front R 8000 5.11; 6.33 913 6560 2 840 /
KAMAZ 6560 front rear / rear R 13000 5.11; 6.33 65222, 65224, 6560
KAMAZ 652212 front R 8000 5.11; 6.33 815 65221,65222 750
KAMAZ 652242 front R 8000 5.11; 6.33 790 65222 840 /
KAMAZ 65221 front rear / rear R 13000 5.11; 6.33 65221, 65222
KAMAZ 65226 front R 8000 5.11; 6.33 790 65226 750
KAMAZ 65228 2nd front R 8000 5.11; 6.33 805 65228
3
KAMAZ 5360 rear R 13000 5.11; 6.33 760 5460
Other manufacturers’ driving axles 1
2
specifications for bus axles are given in the bus chassis description, section “Passenger vehicles”
equipped with the central tyre inflation system
џ Other manufacturers’ axles, incl. Daimler’s, are used on some KAMAZ vehicle 3
production by order, depends on order’s volume
models
Specifications
Applicability
Axle
Make Final Axle load, in KAMAZ
model Type Gear ratio Weight, kg
drive kg vehicles
Driving axle
equipped with 2.533, 2.846,
5325, 5490,
a Daimler HL6 Daimler HL6 rear H 11500 3.077, 3.583, 698
65208, 65209
hypoid final drive 4.3, 5.875
6522, 65225,
Daimler HD7 / HL7 front rear / rear R 13000 5.143 851 / 792 6522 Luxe
Specifications DD150 / 6460, 65206,
Dana front rear / rear H 10000 3.7; 4.33 658 / 595
Applicability in R150 65207
Make Axle model Final Axle Weight,
Type Gear ratio KAMAZ vehicles Dana G150D rear H 10000 3.9; 4.33 573 5308
drive load, kg kg
FAW 498 rear H 13000 3.583; 3.36 740 5460
Daimler AL7 front R 7500 5.143 760 6522, 65225, 6522 Luxe
Hande 6580, 65801,
Hande Axle HDZ10 front R 10000 5.262 740 65802 HDZ16 front rear / rear R 16000 5.262 910/ 832
Axle 65802
24
Frame, suspension, front axle
Frame, suspension
The ladder-type frame and length range from 5 to 12 meters allow to mount a wide Frame material data:
spectrum of equipment. –side member height: 230-280 mm
Frame material: –side member cap width: 65-80 mm
Frame elements Steel grade, strengh class Booster type –side member width: 5 - 9.5 mm
Variable cross-section side member 570МС / 620МС steel grades (20GYT Russian steel make) External L-shaped, 6 mm –booster width: 6-8 mm
Uniform cross-section side member S600MC high-tensile steel (600 MPa yield strength) Internal U-shaped, 8 mm –booster cap width: 66-72 mm
Other frame elements 570МС / 620МС steel grades (20GYT Russian steel make) or S550МС high-tensile steel -
џ Provides better travelling comfort KAMAZ 4308 (4200 kg) front 4200 drum 330 4308
џ Ease of vehicle operation KAMAZ 4308 (5000 kg) front 5000 drum 330 5308
џ Smaller weight 43253, 43255, 65117,
џ Cheaper consumables KAMAZ 65115
front /
second front
6500 drum 355 65115, 53215, 6540,
54115, 65116 / 6540
Brake systems KAMAZ 6520 front 7500 drum 440
53605, 6520, 65201, 5460,
џ All vehicles are fitted with the anti-lock braking system (ABS) and automatic front /
6460
5325, 65207, 65208, 65209,
slip regulation (ASR). Certain models are equipped with the electronic brake KAMAZ 5360
second front
7500 disk 470 5490, 65206, 65806
system (EBS) providing the integrity of ABS and ASR systems, 6520 Luxe, 65201 Luxe,
Hande front /
and electronic stability program (ESP) as well. Axle
HD9.5T
second front
9000 drum 464 6580, 65801, 65806 /
65201 Luxe, 65801
џ Suppliers of air components and brake gears for the disk brake system - 1
specifications for bus axles are given in the bus chassis description, section “Passenger
Wabco, Knorr Bremse, Haldex companies and others. vehicles”
27
Application
KAMAZ-4308 4x2 (C1118-C1125) chassis Municipal operations
Garbage truck
V=10-11 m3
p.74-75
Fire-fighting
Fire engine
ladder truck
V=2.5 m3
p.80-81
Lift vehicles
● Drop-side truck
Gas
Fuel tank capacity, l 210 446 (2х100 + 2x123) Every circuit of the primary brake system Damper plate in the exhaust system
28
Application
KAMAZ-5308 4x2 (С1524-С1530) chassis Logistics
● Drop-side
truck
p.92-93
Van
p.90-91
● KAMAZ products
Dimensions with curb (gross) weight
Vacuum truck
p.74-75
Fire-fighting
Fire engine
Dimensions with curb (gross) weight V=3.2 m3
p.80-81
Power unit Cab
Lift vehicles
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab
Engine Make Mobile crane
185 210 240 245 250 260 (no sleepers) (1 sleeper) (2 sleepers)
1
p.87
Euro-2, EC-3 KAMAZ 740.31-240 C2
30
Application
KAMAZ-43255 4x2 (T1518-T1525) chassis Logistics, construction
● Dump truck
V=6 m3
p.70-71
p.92
Municipal operations
Skip truck
V=9.5 m3
p.74-75
● Dump truck
V=6.5 m3
p.70-71
Lift vehicles
Mobile crane
Payload=16 tn
p.87
32
Application
KAMAZ-43502 / 43261 4x4.1 (В1224-В1228) chassis Construction, lift vehicles
Autohydraulic
Right hand drive (RHD) hoist truck
diesel version H=23.2 m
with C2 cab
is available p.73
p.86
Petrochemical, oil & gas industry
Drill truck
p.76-77
Clutch
KAMAZ 142
1
● Drop-side truck
ZF Sachs MFZ-430 Euro-2 and EC-3 model designation p.92
2
KAMAZ 152 154 3 total length with R Day Cab - 7490 mm
3
Gearbox only with KAMAZ engines
ZF 9S1310TO
Transfer case KAMAZ 65111
● KAMAZ products
● Dump truck
V=6 m3
p.70-71
Municipal operations
3000
3050
Garbage truck
V=10 m3
p.74-75
1360 3780/4180/4800
2080 Skip truck
6250/7630/8910 V=9.5 m3
2090 max
p.74-75
Dimensions with curb (gross) weight, C2 cab
34
Application
KAMAZ-53215 6x4 (Т1924) chassis Logistics
● Drop-side
truck
Payload 11 tn
p.92
● Fuel tank
truck
V=10.45 m3
p.96
Agricultural sector
● Dump truck
V=15.4 m3
Dimensions with curb (gross) weight
p.84-85
Power unit Cab
Engine power, hp / Component model
● KAMAZ products
Day Cab Sleeper Cab High Sleeper cab
Engine Make (no sleepers) (1 sleeper) (2 sleepers)
240
Diesel
1
Clutch KAMAZ 142 the chassis alone is not certified for EC-3
● Drop-side truck
Payload
11.6-14.6 tn
p.92-93
Lift vehicles
●with
Drop-side truck
loader crane
Payload
10-11.7 tn
Dimensions with curb (gross) weight
4910+1440 mm wheelbase is used in modifications with the rear air suspension p.86
36
Application
KAMAZ-65115 / 532291 / 551111 6x4 (T2224,Т2524-T2530) chassis Construction
● Dump truck
V=10 m3
Right-hand drive (RHD) p.70-71
diesel version with an R cab
is available
Agricultural sector
● Dump truck with
side or three-way
dumping
V=15.2-19 m3
p.84-85
Logistics
Dimensions with curb (gross) weight For model 55111 wheelbases of only 2840+1320 and 3690+1320 mm. are available ● Tank truck for
light-weight
Power unit Cab petroleum products
V=10.5-16 m3
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab
Engine Make p.96
240 260 280 285 290 300 (no sleepers) (1 sleeper) (2 sleepers)
Euro-2, EC-3 KAMAZ 740.31-240 740.30-260 C2 C2 Fire-fighting
EC-3 Cummins 6ISBe300 C2 / R C2 / R Ladder truck
H=55 m
KAMAZ 740.62-280 C2 / R C2 / R
Euro-3 p.80-81
Cummins 6ISBe285 C2 / R C2 / R
Municipal operations
Diesel
KAMAZ 740.622-280 C2 / R C2 / R
EC-4
Cummins ISB6.7 300 C2 / R C2 / R Suction truck
Euro-4 Cummins ISB6.7e4 300 R R V=9.7 m3
Cummins ISB6.7Е5 3002 R R p.74-75
Euro-5
KAMAZ 740.705-300 R R
Lift vehicles
Euro-6 Cummins ISB6.7Е6 290 R R
Euro-4 KAMAZ 820.62-300 3
C2 / R C2 / R
● Hook loader
Payload
Gas
KAMAZ 820.92-3004 C2 / R C2 / R 11 tn
Euro-5 5
Weichai WP7NG260 R R p.86
KAMAZ 142
Clutch
ZF Sachs MFZ-430
● KAMAZ products
1 4
model designation for versions with KAMAZ 740.31-240 only with ZF 9S1310TO gearbox
KAMAZ 152 154 2
only with ZF 9S1310TO or 9AS1310TO gearbox 5
except for KAMAZ-154 gearbox
3 6
Gearbox ZF 9S1310TO except for KAMAZ-144 gearbox only with Weichai engine
FastGear 9JS135TA6
Technical specifications
Technical specifications Wheels and tyres
Weights and loads / engine type Diesel Gas (CNG) Wheel size 7.5-20 or 7.50x22.5
Chassis curb weight, kg 70757...8125 8400 Tyre size (*tubeless) 10.00R20 or 11.00R20 or 11R22.5*
- front axle, kg 3375...4125 4300...4550 Specifications for a fully-loaded vehicle
- rear tandem axle, kg 3000...4000 4100...3850 Max. speed, km/h 100
Gross vehicle weight, kg 224007...25200 25200 Gradeability, single / combination vehicle, % (degrees) 25% (14°), 18% (10°)
- front axle, kg 5550...6200 6200
Wall-to-wall turning circle, m 10.7
- rear tandem axle, kg 16850...19000 19000
Front suspension Rear suspension
Chassis payload, kg 143007...17700 16600
Dependent, leaf spring, with hydraulic telescopic Dependent, leaf spring, equalizing beam, with torque
Trailer permissible weight, kg 13000...14800 13000 shock absorbers and stabiliser bar rods
Gross combined weight rating, kg 364007...40000 38200 Primary brake system Parking brake system
Final drive Pneumatic dual circuit braking, ABS, ASR, drum Rear tandem axle wheel brake gears actuated
Gear ratio 4.98 or 5.43 or 5.94 or 6.53 or 7.22 brakes on all wheels by the spring accumulator drive
Type Central double
Emergency brake system Auxiliary brake system
Feed system
Every circuit of the primary brake system Damper plate in the exhaust system
720 (4х80+4х100) or
Fuel tank capacity, l 210 or 350 or 500 7
1040 (9х80+4х80) for light-weight modifications of 65115 model and the only weight values for 55111 model
+7-8552-45-27-45 | www.kamaz.ru Chassis 37
Application
KАМАZ-6520 6x4 (K3330-K3342) chassis Construction
● Dump truck V=12/16/20 m 3
Payload up to 20 tn
Right-hand drive (RHD)
diesel versions p.70-71
with R, RS cabs ● Concrete mixer
are available V=8-9m3
p.72-73
Municipal operations
Garbage truck V=17/24 m3
p.74-75
1
Dimensions with curb (gross) weight with 315/80R22.5 wheels Fire-fighting
carrier
KAMAZ 740.71-320 740.72-360 RS
p.84-85
KAMAZ 740.73-400 C3
Euro-4 KAMAZ 740.74-4202 RS RS Logistics
Cummins ISB6.7e4 300 R
Cummins ISLe400 40 RS RS Pipe truck
KAMAZ 740.735-400 740.745-420 RS RS p.98-99
Euro-5
Cummins ISL400 50 RS
Euro-6 Cummins L9E6 C370 RS Refuelling truck
V=20/22 m3
Gas
● Crew bus
for 20-30 persons
Right-hand drive (RHD)
diesel Euro-2 versions p.73
with C1 or C2 cabs p.86
are available
Construction, lift vehicles
Autohydraulic
hoist truck
H=22 m
p.73
p.86
Petrochemical, oil & gas industry
Dimensions with curb (gross) weight
Petroleum products
Power unit Cab collection and
transport truck
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab V=7 m3
Engine Make (no sleepers) (1 sleeper) (2 sleepers)
240 260 275 280 285 300 p.76-77
Euro-2, EC-3 KAMAZ 740.31-240 740.30-260 C1 / C2 C1 / C2 Logistics
KAMAZ 740.622-280 C2 / R C2 / R
● Drop-side truck
Diesel
EC-4
Cummins ISB6.7 275 C2 / R C2 / R V=18.1 m3
2
KAMAZ 740.705-300 R R p.92-93
Euro-5
Cummins ISB6.7 285 R R
Euro-4 KAMAZ 820.62-300 R ● KAMAZ products
Gas
● Drop-side truck
Payload 10 tn
Right-hand drive (RHD)
diesel Euro-2 version p.92-93
with С1 or C2 cabs
are available
Construction
Payload 9.5 tn
p.70-71
Mobile crane
Payload 19 tn
Transfer case
KAMAZ 6522 6522 ● KAMAZ products
ZF Passau VG2000/300 VG2000/300
Payload
up to 19.5 tn
Right-hand drive (RHD) p.70-71
diesel Euro-3 version
with an RS cab is available
Logistics
Container truck
with a loader crane
p.99
● KAMAZ products
Dimensions with curb (gross) weight
42
Application
KAMAZ-65111 / 532281 6x6 (T2524-T2532) chassis Construction
● Dump truck
V=8.2 m3
Payload 14 tn
p.70-71
Fire-fighting
Fire engine
V=4 m3
p.80-81
Logging
Dimensions with curb (gross) weight
Short log truck
Power unit Cab Payload 10.46 tn
Engine power, hp / Component model p.98-99
Day Cab Sleeper Cab High Sleeper cab
Engine Make p.82-83
(no sleepers) (1 sleeper) (2 sleepers)
240 260 280 300 320
Euro-2, EC-3 KAMAZ 740.31-240 740.30-2602 740.55-300 C2
Logistics
Euro-3 KAMAZ 740.62-280 C2 / R C2 / R
C2 / R C2 / R ● Fuel tank truck
Diesel
Clutch
KAMAZ 142 1
model designation for Euro-2,
● KAMAZ products
ZF Sachs MFZ-430
EC-3 (only with 740.31-240 and 740.30-260 engines)
KAMAZ 152 154 144 154 1543 2
both models are available with the engine
Gearbox 3
are available only with Euro-2, EC-3, EC-4 Kamaz engines
ZF 9S1310TO
Transfer case KAMAZ 65111
Gear ratio 4,98 or 5,43 or 5,94 or 6,53 or 7,22 Primary brake system Parking brake system
Pneumatic dual circuit braking, ABS, ASR, drum Rear tandem axle wheel brake gears actuated
Type Central double brakes on all wheels by the spring accumulator drive
Feed system Emergency brake system Auxiliary brake system
Fuel tank capacity, l 210 or 350 or 210+350 Every circuit of the primary brake system Damper plate in the exhaust system
Logistics
Dimensions with curb (gross) weight
Refuelling
Power unit Cab truck
V=20 m3
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab
Engine Make p.96
320 360 400 (no sleepers) (1 sleeper) (2 sleepers)
3
for roads with a permissible axial load not more than 10 tons / technically permitted
44
Application
KAMAZ-6540 8x4 (T3124-T3130) chassis Construction
● Dump truck
V=11 m3
Right-hand drive (RHD) Payload 18.5 tn
diesel Euro-2 version p.70-71
with C3 cab
is available
● Concrete
pump truck
H=37 m
p.72-73
● Concrete
mixer
Dimensions with curb (gross) weight V=8-9 m3
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab Lift vehicles
Engine Make
240 260 280 290 300 (no sleepers) (1 sleeper) (2 sleepers)
Autohydraulic
Euro-2, EC-3 KAMAZ 740.31-240 740.30-260 C3 hoist truck
H=50 m
EC-3 Cummins 6ISBe300 C3 / R
Euro-3 KAMAZ 740.62-280 C3 / R
p.87
Diesel
Feed system Every circuit of the primary brake system Damper plate in the exhaust system
Other specifications
Fuel tank capacity, l 210 or 350 or 500
Steering system with a double-circuit hydraulic drive (optional)
● Concrete
mixer
Dimensions with curb (gross) weight V=10/12 m3
p.72-73
Power unit Cab
Lift vehicles
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab
Engine Make Mobile crane
(no sleepers) (1 sleeper) (2 sleepers)
320 360 370 400 420 Payload
Euro-2, EC-3 KAMAZ 740.51-320 740.50-360 C3 40-50 tn
Euro-3 KAMAZ 740.60-360 740.63-400 C3/RS p.87
EC-4 KAMAZ 740.632-400 740.642-420 C3/RS
● KAMAZ products
Diesel
Technical specifications
Technical specifications
Weights and loads / engine type Diesel
3 Specifications for a fully-loaded vehicle
Chassis curb weight, kg 10930 / 11230
3 Max. speed, km/h 90
- first and second axle, kg 6330 / 6480
3 Gradeability, % (degrees) 25% (14°)
- rear tandem axle, kg 4600 / 4750
Wall-to-wall turning circle, m 11.5
Gross vehicle weight2, kg 35000 / 41000
- first and second axle, kg 15000 Front suspension Rear suspension
- rear tandem axle, kg 20000 / 26000 Dependent, leaf spring, with hydraulic telescopic shock Dependent, leaf spring, equalizing beam, with torque
Chassis payload2, kg 24070...23770 / 30000 / 29700 absorbers and stabiliser bars rods and a stabiliser bar
Trailer permissible weight, kg -
Gross combined weight rating, kg - Primary brake system Parking brake system
Final drive
Pneumatic dual circuit braking, ABS,ASR, drum Rear tandem axle wheel brake gears actuated
Gear ratio 5.11 brakes on all wheels by the spring accumulator drive
Type Central double
Feed system Emergency brake system Auxiliary brake system
Fuel tank capacity, l 210 or 210+210 or 550
Every circuit of the primary brake system Damper plate in the exhaust system
Wheels and tyres
Wheel size 9.00х22.5 Other specifications
Tyre size (*tubeless) 315/80R22.5* Steering system with a double-circuit hydraulic drive (optional)
2
for roads with permissible axial load not more than 10 tons / technically permitted
46 3
for versions with 3000 + 1440 mm wheelbase
Application
KAMAZ-63501 8x8.1 (В2732-B2736) chassis Fire-fighting
Airfield crash
truck
Right-hand drive (RHD) V=11.2 m3
diesel Euro-2 versions
with C1 or C2 cabs p.80-81
are available Petrochemical, oil & gas industry
Mobile
compressor
station
p.76-77
Oil and gas well
Dimensions with curb (gross) weight with an R cab development and
surveying trucks
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab Logistics
Engine Make
(no sleepers) (1 sleeper) (2 sleepers)
320 360
Euro-2, EC-3 KAMAZ 740.51-320 740.50-360 C1 / C2 C1 / C2
● Drop-side
truck
Diesel
Lift vehicles
Mobile crane
Payload
50 tn
p.87
Logistics
Dimensions with curb (gross) weight with a C3 cab
● Drop-side
truck
Power unit Cab Payload
20 tn
Engine power, hp / Component model Day Cab (no Sleeper Cab High Sleeper cab
Engine Make p.92-93
400 sleepers) (1 sleeper) (2 sleepers)
48
Application
KAMAZ-5325 4x2 (T1825) chassis Municipal operations
1
Garbage truck
6800 V=12-16 m3
1
2990 (3070) 3020 (3100)
p.74-75
1
4550 / 6600
Logistics
● Drop-side truck,
970 (1000)1
940 (970)
insulated van
Payload
10.5-11.5 tn
1475 R470 (315/70R22.5) 39001 / 5100 1
910 / 1770 (16 europallets)
2950
6630 / 8700 p.92-93
Drop-side
tow truck,
refrigerator
Payload
16.77 tn
p.93-94
Euro-3 OM 457LA.V/3 A
Daimler
Euro-5 OM 457LA.V/3 A
Gas
Clutch ZF MFZ-430 A
ZF 12AS2130TO
Gearbox
Allison 4440P
50
Application
KAMAZ-65207 6x4 (Т2640) chassis Logistics
● Drop-side truck
Payload
14.5 tn
p.92-93
Lift vehicles
● Drop-side truck
with a loader crane
Payload 11.3 tn
p.86
Daimler
Евро-5 EEV OM 457LA .EEV/3 A
Gas
ZF 16S2220TD
Gearbox
Allison 4440P
21°
30°
(1026)
R566 The chassis application range will be extended
1575 3600/3810/4110/4410 1440 2050
7590.. 10470 2500
2950
Dimensions with curb (gross) weight
Dimensions for 6580 are shown in the drawing
Note: the dump truck is shown as an example of chassis use Difference for 6520 Luxe: wheelbases 3600, 3900, 4200, 4500 + 1440 mm, front overhang 1475 mm
Power unit Cab
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab
Engine Make
(no sleepers) (1 sleeper)4 (2 sleepers)
400 401 428
Euro-3 Daimler OM 457LA.III/9 A A
EC-4 KAMAZ 740.632-400 A A
Diesel
- rear tandem axle5, kg 20000 / 32000 20000 / 26000 Max. speed, km/h 90
Gradeability, single / combination vehicle, % (degrees) 30% (18°) / 18% (10°)
Chassis payload5, kg 17600 / 29600 16000 / 25000
11.0/ 9.3/ 12.8 for
Trailer permissible weight, kg - 20000 Wall-to-wall turning circle, single / combination vehicle, m
3510/ 3600/ 4410 +1440 mm wheelbases
5
Gross combined weight rating , kg - 49000 / 55000 Front suspension Rear suspension
Final drive Dependent, leaf spring, equalizing beam, with
Dependent, leaf spring, with hydraulic telescopic shock
Gear ratio 5.262 5.11 absorbers and a stabiliser bar torque rods and a stabiliser bar
Primary brake system Parking brake system
Type Hub reduction gear Pneumatic dual circuit braking, ABS, ASR, drum Rear tandem axle wheel brake gears actuated
brakes on all wheels by the spring accumulator drive
Feed system
Emergency brake system Auxiliary brake system
Fuel tank capacity, l 350 or 500 (depends on wheelbase) Every circuit of the primary brake system Damper plate in the exhaust system
5
for roads with the permissible axial load not more than 10 tons / technically permitted
52
Application
KAMAZ-658021 / 6522 Luxe2 6x6 (K3340, 4140-4142) chassis Construction, logistics
● Dump truck
V=12/16 m3
Payload
720... 2700 2080 up to 26 tn
4100... 5000
3460 p.70-71
p.94-95
(3410)
330
1230 (270)
● KAMAZ products
°
28
30
(1190)
°
R566 The chassis application range will be extended
1575 3810/ 4110/ 4410/ 4710 1440 2050
7960... 10840 2500
2950
Dimensions with curb (gross) weight
Dimensions for 65802 are shown in the drawing
Note: the dump truck is shown as an example of chassis use Difference for 6522 Luxe: wheelbases 3600 / 3900 / 4200 / 4500 + 1440 mm, front overhang 1475 mm
Technical specifications
Technical specifications
Weights and loads 65802 6522 Luxe
Chassis curb weight, kg 11000 10400 Wheels and tyres
- front axle, kg 5000 5000 Wheel size 65802: 8.5-24; 6522 Luxe: 9.00х22.5
- rear tandem axle, kg 6000 5400 Tyre size (*tubeless) 65802: 12.00R24; 6522 Luxe: 315/80R22.5*
Specifications for a fully-loaded vehicle
Gross vehicle weight4, kg 29000 / 41000 27500 / 33500
Max. speed, km/h 90
- front axle, kg 9000 7500
Gradeability, single / combination vehicle, % (degrees) 30% (18 °) / 18% (10°)
- rear tandem axle, kg 20000 / 32000 20000 / 26000
Wall-to-wall turning circle, singl e/ combination vehicle, m 12.0 / 11.6 (for 3600/3810 + 1440 mm wheelbase)
Chassis payload4, kg 18000 / 30000 17100 / 23100
Front suspension Rear suspension
Trailer permissible weight, kg - 20000
Dependent, leaf spring, with hydraulic telescopic Dependent, leaf spring, equalizing beam, with torque
Gross combined weight rating4, kg - 47500 / 53500
shock absorbers and a stabiliser bar rods and a stabiliser bar
Final drive
Primary brake system Parking brake system
Gear ratio 5.262 5.143 Pneumatic dual circuit braking, ABS, ASR, drum Rear tandem axle wheel brake gears actuated
brakes on all wheels by the spring accumulator drive
Type Hub reduction gear
Emergency brake system Auxiliary brake system
Feed system
Every circuit of the primary brake system Damper plate in the exhaust system
Fuel tank capacity, l 350 or 500 (depends on wheelbase)
4
for roads with the permissible axial load not more than 10 tons / technically permitted
30°
17
330
● KAMAZ products
R566 2870/3170/
1575 2000 3470/3770/4070 (270) 2050 The chassis application range will be extended
1440
8950... 11830 2500
2950
Dimensions with curb (gross) weight
Dimensions for 65801 are represented on the drawing
Note: the dump truck is shown as an example of chassis use Difference for 65201 Luxe: wheelbases 3000, 3300, 3600, 3900 + 1440, front overhang 1475 mm
Technical specifications
Technical specifications
Weights and loads / engine type 65801 65201 Luxе
Wheels and tyres
Load on driving axle, kg 16000 13000
65801: 8.5-24
Chassis curb weight, kg 12200 11000 Wheel size
65201 Luxe: 9.00х22.5, front axles 11.75х22.5
- first and second axle, kg 6600 4600
65801: 12.00R24
- rear tandem axle, kg 5600 6400 Tyre size (*tubeless)
65201 Luxe: 315/80R22.5*, front axles 385/65R22.5*
4
Gross vehicle weight , kg 38000 / 50000 38000 / 44000 Specifications for a fully-loaded vehicle
- first and second axle, kg 18000 18000 Max. speed, km/h 90
- rear tandem axle, kg 20000 /32000 20000 / 26000 Gradeability, % (degrees) 30% (18°)
Chassis payload4, kg 25800 / 37800 27000 / 33000 Wall-to-wall turning circle, single / combination vehicle, m 11.5-11.6
Trailer permissible weight, kg - 20000 Front suspension Rear suspension
Gross combined weight rating4, kg - 58000 / 64000 Dependent, leaf spring, with hydraulic telescopic Dependent, leaf spring, equalizing beam, with torque
Final drive shock absorbers and stabiliser bars rods and stabiliser bars
Primary brake system Parking brake system
Gear ratio 5.262 5.11
Pneumatic dual circuit braking, ABS,ASR, drum Rear tandem axle wheel brake gears actuated
brakes on all wheels by spring accumulator drive
Type Hub reduction gear
Emergency brake system Auxiliary brake system
Feed system Every circuit of the primary brake system Damper plate in the exhaust system
R2120 R1840
Ø 2" or 3.5"
● Semi-trailer truck
Payload 24.5 tn
p.90-93
● KAMAZ products
1
Dimensions including an air and leaf spring suspension with curb (gross) weight
R2155 R1950
● Semi-trailer truck
Payload 27 tn
p.90-93
● KAMAZ products
Dimensions with curb (gross) weight
1
Clutch KAMAZ 142 the vehicle is not certified for EC-3, only Euro-2
Fuel tank capacity, l 350 Every circuit of the primary brake system Damper plate in the exhaust system
56
Application
KAMAZ-65116 6x4 (Т2226-Т2230) tractor unit Logistics
R2120 R2105
Ø 2"
● Semi-trailer truck
Payload 30 tn
p.90-93
● KAMAZ products
KAMAZ
Euro-5 820. 92-3001 R
Clutch ZF Sachs MFZ-430 1
only with ZF 9S1310 gearbox
KAMAZ 154 1542 2
only with KAMAZ 820.62-300 engine
Gearbox
ZF 9S1310TO
● Dump truck
Dimensions with curb (gross) weight Semi-trailer truck
Payload 26-28 tn
Power unit Cab p.73
Engine power, hp / Component model Day Cab Sleeper Cab High Sleeper cab p.95
Engine Make
(no sleepers) (1 sleeper) (2 sleepers)
360 400 420
Euro-2, EC-3 KAMAZ 740.50-360 740.35-400 C3 C3
Diesel
58
Application
KAMAZ-53504 / 441082 6x6.1 (В2126-В2130) tractor unit Logistics
R2895,2320/2330 R2120,2130/2130
Ø 2"
Semi-trailer truck for oil
transportation
V=18 m3
p.96-97
(385)
Fuel tank capacity, l 350+210 Every circuit of primary brake system Damper plate in the exhaust system
2
only for the 44108 model with the KAMAZ. 740.30-260 engine
3
in brackets ( ) for the version with a hydraulic power installation
R2600 R2250
Ø 2" or 3.5" 300
3220*
3150
Semi-trailer truck-
Short log truck
1925*
1885
Payload 30 tn
1370*
1290
p.82-83
p.98-99
1405 3515 1440 720
7280
60
Application
KAMAZ-65225 6x6 (K3336-K3342) tractor unit Construction, logistics
R2800
Fuel tank capacity, l 500 Every circuit of the primary brake system Damper plate in the exhaust system
1
for roads with the permissible axial load not more than 10 tons / technically permitted
R2350
62
Application
KAMAZ-65228 8x8 (K4153-K4160) tractor unit Logistics, petrochemical, oil & gas industry
R2610
Semi-trailer truck for
Ø 2" or 3.5" or 4" long cargo
transportation
p.99
Tyre size 12.00R24 Steering system with double-circuit hydraulic drive (optional)
1
for roads with the permissible axial load being not more than 10 tons / technically permissible
● Semi-trailer truck
3780(3740)
R2120 R1735...1865 p. 90-93
5651/7652,3
Ø 2" ● KAMAZ products
1100-1150
25°
13° 220
1475 35801/37802,3 2100
61301/63002,3 2550
Dimensions for M1840-M1842 with curb (gross) weight 2950
Difference for T1840: cab height with curb (gross) weight: 3180 (3140) mm
64
Application
KAMAZ-65209 6x2-2 (M2640) tractor unit Logistics
● Semi-trailer truck
3780
p.93
R2040 R2175
3475
340 p.95
Ø 2"
p.97
200
1150
16° 25°
● KAMAZ products
R468 3300 1440 2040
7205 2500
2950
● KAMAZ products
66
Application
KAMAZ-65806 6x4 (K2642, K3342) tractor unit Logistics
3170 (3120)
R2040 R2175
Ø 2" or 3.5"
380 ● Semi-trailer truck
p.93
1390 (1340)
p.95
38°
17°
p.97
1475
R500 3300 1440 2080 ● KAMAZ products
(272)
303
7140 2500
2950
Dimensions with curb (gross) weight
A A
Fuel tank capacity, l 300 + 300 Every circuit of the primary brake system Damper plate in the exhaust system
1
for roads with permissible axial load not more than 10 tons / technically permitted
+7-8552-45-27-45 | www.kamaz.ru
69
Construction, mining industry
Dump trucks
KAMAZ-65201 dump truck with an oval section KAMAZ-6520 dump truck with a rectangular KAMAZ-65222 dump truck with a rectangular
body section body section body
KAMAZ-43255 dump truck with an oval New generation KAMAZ-6580 dump truck New generation KAMAZ-65801 dump truck
section body with an oval section body with an oval section body
70
џ Engine power from 185 up to 440 hp Technical
Technical specifications
specifications for dump trucks
Tipperов
џ 5-, 6-, 9-, 10-, 16-speed gearbox Gross vehicle Availability
Wheel weight1, Payload1, Dumping direction and
џ Dumping direction: rear, side, three-way Base model
arrangement kg kg platform volume,
of the dump truck
made by KAMAZ
џ Platform type: bucket, rectangular, oval 43255 р.31 4х2 14800 7500-7750 R: 6 ●
џ Standard design for usage in construction.
Steel platforms are made, by special order, 53605 р.32 4х2 20500 11700 R: 6.5 ●
with features similar to Hardox, to be used 43265 р.34 4х4 15700 9525...8850 R: 6 ●
in mining industry (for hard rock)
џ Heated dump platform types 65115 р.37 6х4 25200 15000 R: 8.5/10/11 T: 10 ●
6520 2
р.38 6х4 33100 20000 R: 12/16/20 T: 10 ●
43118 р.40 6x6.1 20750 9500 R: 6.6 ●
65222 р.42 6х6.1 34000 19500 R: 12/16 ●
65111 р.43 6х6 25200 14000 R: 8.2 ●
6522 р.44 6х6 33100 19000 R: 12/16 ●
6540 р.45 8х4 31000 18500 R: 11 ●
65201 2
р.46 8х4 41000 25500 R: 16/20 ●
65802 р.52 6x4 35000 (410003 ) 22500 (270003 ) R: 16 (203 ) ●
658022 р.53 6x6 33500 (410003 ) 18500 (260003 ) R: 12/16 ●
658012 р.54 8x4 44000 (500003 ) 29000 (330003 ) R: 20 (253 ) ●
Dumping direction: R - rear, Т - three-way
1
technically permissible weights
2
used in mining
3
for vehicles equipped with driving axles for the 16 tn load
Concrete mixer 58149 Concrete pump truck 58153 Concrete mixer 58146Z Concrete pump truck 58154
mounted on KAMAZ-6520 chassis mounted on KAMAZ-6540 chassis mounted on KAMAZ-43118 chassis mounted on KAMAZ-65201 chassis
Technical specifications
Chassis Concrete mixer Concrete pump truck
Wheel Gross vehicle Mixer drum effective Delivery height, Performance,
Base model Mixer drum drive KAMAZ products KAMAZ products
arrangement weight, kg volume, m3 m m3 / hour
72
Application range
4x2 4x4.1 6x4 6x6.1 6x6 8x4 8x8.1 6x4
Chassis and tractor unit base models
Range, measurement unit Chassis Tract.unit
Layout view Vehicle type Key specifications (standalone vehicle as part
р.28
43253 р.30
43255 р.31
53605 р.32
р.33
65115 р.37
р.38
р.39
43118 р.40
65224 р.41
65222 р.42
р.43
р.44
р.45
65201 р.46
р.48
65116 р.57
р.58
65225 р.61
of a combination vehicle)
43502/
43114
5350/
4308
4326
6520
6522
6540
6560
6460
65111
7500-25500 kg /
Payload
25000-32000 kg
Dump truck ● ● ● ● ● ● ● ● ● ● ● ●
Body capacity 6 - 29 / 18-50 cu.m
Performance 90.111,125.140 cu.m/h
Concrete pump truck
Delivery height 21-47 m
● ● ● ● ●
Autohydraulic hoist
truck
Delivery height 18-54 m ● ● ● ● ● ● ● ● ● ●
74
Application range
4x2 4x4.1 4х4 6x4 6x6.1 6x6 8x4 6x6
Chassis and tractor unit base models
Chassis Tract.un.
Range,
р.61
р.28
р.30
р.31
р.32
р.33
р.34
р.36
р.37
р.38
р.39
р.40
р.41
р.43
р.44
р.45
р.46
р.49
Layout view Vehicle type Key specifications measurement
-
unit
43502/
546011
43253
43255
53605
43265
65224
65201
65225
65117
65115
43114
43118
5350/
4308
6520
6522
6540
4326
65111
5325
Vacuum suction vehicle Tank capacity 5-14 cu.m ● ● ● ● ● ● ● ●
Tank capacity 3.25-15 cu.m
Vacuum truck
Tanks capacity 1.5-2 cu.m
● ● ● ● ● ● ●
Cementing truck Oil well dewaxing unit Oil and gas condensate collector Truck mounted drill rig
mounted on KAMAZ-43118 chassis mounted on KAMAZ-43118 chassis mounted on KAMAZ-43118 chassis mounted on KAMAZ-65111 chassis
Application range
4x2 4x4.1 6x4 6x6.1 6x6 8x4 8x8.1
Chassis base models
р.28
43502/ р.33
р.37
р.39
р.40
р.41
р.43
р.44
р.45
р.47
Vehicle type Key parameters Range,
Layout view
measuring units
65224
63501
65115
43114
43118
5350/
4308
4326
6522
6540
65111
Tank volume 4-5.5 cu.m
Oil extraction truck
Propulsive thrust on the main winch 3000-7000 kg ● ●
Tank volume 6-7 cu.m
Well acidizing truck
Maximum height 11.5-18 l/sec ●
Performance 12 cu.m
Dewaxing unit ●
Oil heating temperature 150°C
76
4x2 4x4.1 6x4 6x6.1 6x6 8x4 8x8.1
Chassis base models
4308 р.28
43502/ р.33
65115 р.37
5350/ р.39
43118 р.40
65224 р.41
65111 р.43
6522 р.44
6540 р.45
63501 р.47
Vehicle type Key specifications Range,
Layout view
measurement
43114
4326
unit
Measuring unit
(incl. the flow rate
measurement)
Crude oil and gas mixture composition ● ●
Volume 9 cu.m
Mixing unit Maximum capacity
250 kg/min
● ● ●
of the mixing-loading unit
42111-S4 crew bus made of sandwich panels 4208 crew bus Patrol wagon
mounted on KAMAZ-43502 chassis mounted on KAMAZ-5350 chassis mounted on KAMAZ-4308 chassis
Interior
Bus interior: tray table Bus interior: one of interior designs Bus interior: air hatches may be used for
evacuation
78
Cargo-passenger vehicles
42111-S4 crew bus made of sandwich panels 4208 crew bus Patrol wagon
mounted on KAMAZ-43502 chassis mounted on KAMAZ-5350 chassis mounted on KAMAZ-4308 chassis
Model range
Chassis carrying Wheel base, Passenger
Base model Base chassis Fuel Wheel arrangement Note
capacity, kg mm capacity
KAMAZ partners also manufacture crew buses of various types mounted on KAMAZ-43502; -5350; -43114 and -43118 chassis
Fire engine ladder truck Fire tanker truck Airport rescue and firefighting ● Fire tanker truck mounted on
mounted on KAMAZ-65201 chassis mounted on KAMAZ-43253 chassis vehicle mounted on KAMAZ-6560 KAMAZ-43502 chassis
chassis ● KAMAZ product
Application range Information
4x2 4x4.1 4x4 6x4 6x6.1 6x6 8x4 8x8.1 6x6 on the
Range,
measuring units
Chassis and tractor unit base models KAMAZ
Chassis Tract.un.
(autonomous fire tanker:
4308 р.28
43253 р.30
43255 р.31
53605 р.32
43502/ р.33
65115 р.37
6520 р.38
5350/ р.39
43118 р.40
65224 р.41
65222 р.42
65111 р.43
6522 р.44
6540 р.45
65201 р.46
63501 р.47
6560 р.48
65225 р.61
43265 р.34
Layout view Vehicle type Key specifications vehicle as part of
-
a combination
43114
53871
vehicle)
4326
Hiromax NP water
spray suppression
system releases 600
Ladder truck Height 30-60 m ● ● ● ● ● ● ● l/min of water fog. Fire
Standard package: loader crane,
suppression
Emergency / performance is higher
rescue vehicle searchlights, telescoping mast, ● ● ● ●
passenger compartment than usual by 4-6
times. Standalone
Airfield crash suppression is at least
truck Water tank capacity 5000-13000 l ● ● ● ● ●
30 minutes of
Gas-water mixture
150 kg/sec autonomous
Gas-water production rate suppression without
extinction truck ●
Fuel tank capacity 2500 l any connection to an
external water source,
Water tank capacity 3-6 cu.m
Combined which is important in
extinction truck Weight of transported ● ● ● low water areas and
chemical powder 1000 kg
with water supply
Water tank capacity 2000-6000 l problems. Water tank
Pump-hose
vehicle ● ● ● ● ● capacity: 3,000 l; foam
Foam-forming tank 600-1000 l tank capacity: 200 l.
1
The 5387 model is not included in the catalogue. Basic specifications: chassis 4x4, 340 hp Euro-4 Сummins engine, curb/ gross vehicle weight 6900 / 15400 kg
80
4x2 4x4.1 4x4 6x4 6x6.1 6x6 8x4 8x8.1 6x6
р.28
43253 р.30
43255 р.31
53605 р.32
43502/ р.33
43265 р.34
65115 р.37
р.38
5350/ р.39
43118 р.40
65224 р.41
65222 р.42
65111 р.43
р.44
р.45
65201 р.46
63501 р.47
р.48
65225 р.61
vehicle as part of a
-
combination vehicle)
43114
5387
4308
4326
6522
6520
6540
6560
Foam truck Foaming tank 5000-9000 l ● ● ● ● ● ● ● ● ●
Mobile aerial
tower Height 30-54 m ● ● ● ● ●
Stalk trailer truck Logging truck Short log truck with a hydraulic manipulator
mounted on KAMAZ-65222 chassis mounted on KAMAZ-43118 chassis mounted on KAMAZ-43118 chassis
Logging semi-trailer truck Short log semi-trailer truck Short log semi-trailer truck
mounted on KAMAZ-65224 tractor unit mounted on KAMAZ- 65221 tractor unit mounted on KAMAZ- 44108 tractor unit
82
KAMAZ chassis and tractor units for timber industry
Wheel Gross vehicle weight, Road-train gross Availability of KAMAZ vehicles for
Type Base model Wheelbase, mm
arrangement kg weight, kg timber industry
Application range
6x4 6x6.1 6x6 6x4 6x6.1 6x6
Chassis and tractor unit base models
Chassis Tractor units
р.36
р.37
р.38
р.39
р.40
р.41
р.43
р.44
р.57
р.60
р.62
Layout view Vehicle type Key specifications Range, measuring units
65224
65221
65226
65117
65115
43114
43118
65116
5350/
6520
6522
65111
Wheelbase
3300-3700 mm
(between axle 1 and axle 2)
Logging truck ● ● ● ● ● ● ● ● ●
Payload 5000-40300 kg
Wheelbase
3100-4600 mm
(between axle 1 and axle 2)
Short log truck ● ● ● ● ● ● ● ● ●
Payload 11000-20000/30000-53000 kg
84
KAMAZ chassis for agricultural sector
Wheel Gross Vehicles and KAMAZ grain carrier platform
Dumping direction 3-rd parties grain carrier platform
Base model arrange- vehicle Wheelbase, mm (semi-) trailer trucks volume, cu.m
weight, kg for tipper platform volume, cu.m
ment made by KAMAZ (vehicle / (semi-) trailer truck)
4308 р.28 4x2 11900 3500/ 4100/ 4700 – D: 15
43253 р.30 4х2 15500 4200 – D: 15
53605 р.32 4x2 20500 3950/ 4200 + 1440 – T: 15
53215 р.35 6x4 33650 3190 / 3690 ● T: 7;8;10;15.4 / 34 side 2-way T: 15.4
65117 р.36 6х4 24000 4970 + 1320 ● D: 31-37 / 67 D: 31
65115 р.35 6х4 25200 3190/ 3690/ 4470 + 1320 ● T: 15.4-17 / 34 side 2-way T: 17 - 29
6520 р.38 6х4 33100 3600/ 4600 + 1440 ● T: 24,30,32 / 48,60,64 side 2-way T: 31
43118 р.40 6х6.1 21600 3690/ 4100/ 4600 + 1320 – D:18.5
65207 р.51 6х4 26000 5100 + 1440 ● D: 33-40.5 –
T – tipper platform; D – drop-sided platform
Application range
4x2 6x4 6x6.1 6x6 6x4
Chassis and tractor unit base models
Range, measuring units Chassis Tractor units
Layout view Vehicle type Key specifications
4308 р.28
43253 р.30
65117 р.36
65115 р.37
6520 р.38
65207 р.51
43114 р.39
43118 р.40
65111 р.43
65116 р.57
6460 р.58
(sole vehicle / part
of a combination vehicle)
Sole vehicle
13600-14000 kg
payload
Grain carrier
Combination vehicle
● ● ● ● ●
gross vehicle weight 38000-53000 kg
KAMAZ-43118 with KAMAZ-65117 with 25 t mobile crane Scrap truck mounted on Multilift mounted on Autohydraulic hoist
a rope loader crane a loader crane mounted on KAMAZ- KAMAZ-65115 chassis KAMAZ-6520 chassis truck mounted on
65115 chassis KAMAZ-43253 chassis
Vehicles with loader cranes
A B C D E F G H I
Crane payload at Crane payload at
Wheel Platform Vehicles with a hook grab
minimal operational maximal operational
KAMAZ base arran- length, mm / Vehicle - 11000 Permissible length of the
Layout view outreach outreach 65115 р.37
chassis ge- body volume, payload, kg changeable body 5600-6200 mm
ment cu.m. Outreach, Payload, Outreach, Payload, 6х4
- 17830- Permissible length of the
mm kg mm kg 6520 р.38
18275 changeable body 4250-6500 mm
A B C D E F G H I Short log truck with a loader crane
Vehicles with rope loader cranes
4308 р.28 4х2 5295 4000 2 3050 7.53 790 6522 р.44 6х4 6500 3 2900 7.3 1015
43118 р.40 6112 9200-9300 2.50 3140- 8 1660- 43502 р.33 4x4.1 - - - - 22-32 200-
6х6.1 6100 2730 5350 р.39 6x6.1 22-32 300
65224 р.41 5000 17540 2.50 8500 7.9 3840
Dump trucks with a loader crane Tractor unit with loader crane
53504 /
43253 р.30 4х2 6.5 5000 3.50 1425 6.78 730 р.59 6х6 - 10.2 2 6050 8.4 1320
44108
65115 р.37 6х4 15.7 12750 2.50 6100 8.00 2730 43118 р.40 6х6 - 9.30 2.50 5900 19 300
65117 р.36 6х4 16.1 10000 2.50 6100 8.00 2730 65116 р.57 6х4 - 12.50 2.5 3140 8 1690
86
Mobile cranes
Wheel Max. gross Crane unit payload, Maximum load
Layout view Base model Boom length, m
arrangement vehicle weight, kg kg moment, tn/m
25000 80 – 85 9 – 32.7
65115 р.37 6х4 25200
32000 102.4 10.75-26.7
88
KAMAZ chassis for technical aid, laboratories
Base model Wheel arrangement Gross vehicle weight Wheelbase, mm
Application range
4x2 4x4.1 6x4 6x6.1 6x6 8x8.1
Chassis base models
Range, measuring units
р.28
р.33
р.36
р.37
р.39
р.40
р.41
р.43
р.48
Layout view Vehicle type Key specifications (sole vehicle / part
of a combination vehicle)
43502/
65224
65117
65115
43114
43118
5350/
4308
4326
6560
65111
Mobile station CTO ● ● ● ● ● ●
Special purpose
laboratory CTO ● ● ● ●
Emergency repair
truck
CTO ● ● ●
transporting weight by
at least 20,000 kg
semi-loading and towing
Rescue vehicle ● ● ● ●
load moment for loader crane, t-m 25
Van mounted on KAMAZ-4308 chassis Van mounted on KAMAZ-65117 chassis Mobile medical station
mounted on KAMAZ-43502 chassis
Van mounted on KAMAZ-5308 chassis Van mounted on KAMAZ-53215 chassis Hazardous cargo van
mounted on KAMAZ-43114 chassis
90
Type Layout view
Wheel
arrange- Payload, kg
Platform volume,
Base model
● KAMAZ semi-trailer -
m3
ment insulated van
2-axle van 4x2 5500 30 4308 р.28
р.28
р.29
р.30
р.32
р.33
р.36
р.37
р.38
р.39
р.40
р.43
or part of a
Layout view Vehicle type Key specifications combination
vehicle)
Semi-trailer - insulated van’s
43502/
43253
53605
65117
65115
43114
43118
5350/
4308
5308
4326
6520
65111
technical specifications
Valuable cargo
van
Payload 4000-15000 kg ● ● ● ● ● ●
Curb weight, kg 7750
● KAMAZ products
● KAMAZ products
92
Drop-side (semi-) trailer trucks
КАМАZ-65207 grain carrier Combination vehicle: KAMAZ-5490 tractor unit Combination vehicle: KAMAZ-65116 tractor unit
with a drop-side semi-trailer with drop-side semi-trailer
Trailer / semi-trailer Combination vehicle
Trailer, semi-trailer type Layout view Wheels per 3 Chassis and tractor units
Payload, kg Body volume, m Payload, kg Cumulative volume, m3
semiaxle variants
22; 25;
● 2-axle drop-side 65117 (6x4) р.36 22600-31250
2 11300 - 16650 11-43 78.89
trailer 65207 (6x4) р.51 25800/311150
86.4/ 93.16
● 2-axle drop-side 1 17000 - 22500 19.2 – 50.0 53504/ 44108 (6x6.1) р.59 17900-22500 18-50
semi-trailer
● KAMAZ products
+7-8552-45-27-45 | www.kamaz.ru Logistics 93
Dump trucks and (semi-) trailer trucks
Maximum
Wheel Dumping direction combination
Payload, Chassis
Vehicle type Layout view arran- and platform vehicle gross
kg models vehicle
gement volume
weight, kg
8850 /
● 2-axle 4x4
9525
R: 6 43265 р.34 -
dump truck
R: 8.5; 10; 11
12000 65115 р.37 40000
D: 10 T: 10
R: 12; 16; 20 6520, р.38
● 3-axle 6x4 20000 D: 24; 30; 32 6520 р.52 53100
KAMAZ-6580 construction dump truck dump truck T: 10.5 Luxe
65201, р.46
● 4-axle 8x4 25500 R: 16; 20 65201 р.54
dump truck Luxe
33000 R: 25 65801 р.54 -
● KAMAZ products
94
Dump (semi-) trailer trucks Trailer Combination vehicle
Cumula-
Trailer, semi-trailer Wheels
Dumping tive
Layout view Payload, Payload,
type per Chassis,
direction and cargo
semi- kg tractor units kg
axle volume, m3 volume,
m3
65115 р.37 19985 30
D: 8, 11, 65111 р.43 22400 32, 34
2-axle 10700- 15, 17,
● dump truck 2 16000 6520, р.38
trailer 6520 р.52 22400 34
Т: 10, 20 Luxe
6580 p.52 33750 27, 31
6520, p.38
3-axle 15000 D: 27 6520 p.52 34000 52-58
● dump truck 2 Luxe
trailer 18000 T: 28 53200-
6580 p.52 52-58
44200
13500, D: 24, 27, 6520, p.38
15000, 30, 38 6522, p.44
3-axle 18000 6520 p.52 33500-
● dump truck
1
Luxe, 38000
26-68
Combination vehicle: КАМАZ-6520 dump truck trailer 18000 T: 28 6522 p.53
Luxe
+ dump truck trailer 18000 R: 16 6580, p.52 39700-
65802 p.53 44200
53504/ p.59
2-axle 21000 27
44108
● dump truck 1 22400 R: 27
semi-trailer 6460, p.58
20000 28.4
65806 p.67
5460, p.55
8.7/10.45
53215 p.35 6x4 19660 W/ 1/ 8.3-11
8.7/10.45; 2-3 6520 p.38 6x4 33100 F 20-22 1-2 20 2
65115 p.37 6x4 25200 F 1-3 8.3-17
11.2; 16;17
1
Note: F - fuel, light oil, W- potable water, O – oil, bitumen, V- vacuum oil-field tank
96
Tank (semi-) trailer trucks
Application range
4x2 4x4.1 6x4 6x6.1 6x6 4x2 6x4 6x6.1 6x6
Range, Chassis and tractor unit base models
measuring Chassis Tractor units
units (sole
Key speci- vehicle /
p.28
p.30
p.33
p.37
p.38
p.39
p.40
p.41
p.43
p.44
p.55
p.57
p.58
p.65
p.66
p.67
p.59
p.61
Layout view Vehicle type
fications part of a
combination
43502/
53504/
43253
65224
65209
65806
44108
65225
65115
43114
43118
65116
5350/
65206
4308
4326
6520
6522
5460
6460
65111
vehicle)
10 / 13.6 –
● 2-axle tank trailer Animal feed truck Volume
55 cu.m ● ● ● ●
Steel,
stain- 10 / 13.6 –
1 F/W 8 – 9.5 43118 p.40 20.7
less Flour truck Volume
55 cu.m ● ● ●
steel
● 2-axle tank semi-trailer 10 / 13.6 –
● ● ●
16.6;18.5;
Grain tanker Volume
55 cu.m ●
65116 p.57
23.1
16.6 –
2 Steel F/O 20, 26 6.5-22
33.5
6460 p.58
Refuelling truck Volume
cu.m ●● ●● ● ● ●●● ● ●
22, 30, 33.5
● 2-axle tank-semi-trailer Oil and fuel refilling 4.7-18
53504/ 16.6; 18; truck
Volume
cu.m ● ● ● ●
1 Steel F/O 16.6 - 20 p.59
44108 20;
Compres-
2.5 /
sed gas
● 3-axle tank semi-trailer Gas tank truck volume
3-5 cu.m
● ●
28; 30
Steel, 5490 p.64 Operating 250 kgf/
1 alumi- F/O 24.5 - 40 pressure sq.sm
24.5; 28;
num 6460 p.58 6-22 /
33.5; 40
There are specifications for KAMAZ tanks in the table
LNG tank truck Volume 7.5-57 ● ●
cu.m
● KAMAZ products
1
Note: F - fuel, light oil, O - oil, bitumen, W – potable water
Combination vehicle: tractor unit КАМАZ-65226 Combination vehicle: tractor unit КАМАZ-65225 Container truck
with heavy-duty semi-trailer with heavy-duty semi-trailer mounted on KAMAZ-6560 chassis
6460 p.58
65116 p.57
1 Container truck up to 33000 65206 p.66 up to 33000
65209 p.65
65806 p.67
65225 p.61
2 Heavy-duty hauler up to 60000 65226 p.62 up to 60000
65228 p.63
98
Lowboy trucks and (semi-) trailer trucks
Application range
4x2 6x4 6x6.1 6x6 8x8.1 4x2 6x4 6x6.1 6x6 8x8
Chassis and tractor unit base models
Range,
Chassis Tractor units
measuring units
Key
p.28
p.29
p.36
p.37
p.38
p.39
p.40
p.41
p.42
p.43
p.44
p.47
p.48
p.55
p.64
p.57
p.65
p.66
p.58
p.67
p.59
p.60
p.61
p.62
p.63
Layout view Vehicle type (sole vehicle /
specifications
part of a
combination
53504/
65224
65222
63501
65209
65206
65806
44108
65221
65225
65226
65228
65117
65115
43114
43118
65116
5350/
4308
5308
6520
6522
6560
5460
5490
6460
65111
vehicle)
Container carrier
vehicle/combination Payload 11000-22000 kg ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
vehicle
Container carrier
vehicle/combination
vehicle with loader
Payload 9500-11000 kg ● ● ● ● ● ●
crane
Wheelbase
3100-4600 mm
(wheels 1-2)
Short log truck ● ● ● ● ● ● ● ● ● ● ●
11000-20000 /
Payload
30000-53000 kg
Car hauler
combination Payload 10000-23000 kg ● ● ● ● ● ●
vehicle
Heavy-duty
cargo
combination Payload Up to 60000 kg ● ● ●
vehicle
Сombination
vehicle for
long cargo Payload 11000-60000 kg ● ● ● ● ● ● ● ● ● ● ● ● ●
(incl.pipe trucks)
+7-8552-45-27-45 | www.kamaz.ru
101
Bus chassis
Model range
Chassis
Specifications
КАМАZ-3297 КАМАZ-4308 КАМАZ-5297 КАМАZ-52974
102
KAMAZ-3297 4x2 chassis for middle-floor small size buses
104
КАМАZ-5297 4x2 chassis for middle-floor large size buses
2873
60 60 60 60 60
60 1520 625 930 1065 1530 1175 900 555 1520 60
359
1380
1677
1589
716
990
676
240
8°
11°
80
Rсм447 251
2081 5840 2979
11690
20501 40 40
415 18401 405 1700 60
Dimensions for city modifications
544
427 595
804
1842*
2.3°
109
1615
990
818
676
100
347
399
441
B*
2350
2452
2328
7°
120
7°
700
80
447
2660 5840 3328
11866
60 615 555 242
1230
Dimensions for diesel modifications 1290 1760
Cummins 6ISBe270В
pers. up to 45/45/0 pers.
Euro-4 Cummins ISB6.7e4270В
Euro-5 Cummins ISB6.7Е5250В
Euro-4 KAMAZ 820.61 1
total passenger capacity (permissible) / seats / seat assigned to disabled persons
2
М906LAG. only with 6S1310BO gearbox
Gas
Daimler 3
the version availibility is limited
Euro-5 EEV/1
4
only with 6AP1000B gearbox
Yuchai YC6G260N-503
Clutch ZF Sachs - MFZ 4302 - ● KAMAZ products, bus modifications can be found in the catalogue section
ZF 6AP1000B 6S1310BO 6AP1000B
Gearbox
Voith D854.5E
Technical specifications
Technical specifications Wheels and tyres
Wheel type and size 22.5x8.25 disc, steel
Weights and loads / engine type Diesel Gas (CNG) 3
106
КАМАZ-52974 4x2 chassis for low-floor large size buses
256 1190
60 1490 850 640 1220 800 1510 750 350 566 574 350 1490 310 500
272
121
50 40
715
839
815
1017
1522
986
260
875
2729
2350
2559
2480
340
109
410
696
884
815
447
100
100
335
441
217
7° 6°
50 50
121
278
1870
2400 5840 3270
12013
1
Euro-5 Cummins ISB6.7Е5 250B total passenger capacity (permissible) / seats / seat assigned to disabled persons
● KAMAZ products, bus modifications can be found in the catalogue section
Gas
ZF 6AP1000B 6AP1200B
Gearbox
Voith D854.5E
108
12-meter bus model range (Euro-4/5)
Passenger capacity options, seats
Emission
Model Floor level Engine Fuel Gearbox (total (permissible) /seats / seats
standard
for disabled persons
City buses
5299-10-42 middle-floor Cummins ISB6,7e4 270B Diesel Euro-4 ZF 6S1310BO 112(106)(99) / 23 or 25 or 30 / 0; 97 / 25 / 1
5299-20-42 middle-floor Cummins ISB6,7e4 270B Diesel Euro-4 Voith D854.5Е or ZF 6AP1200B 112(106)(99) / 23 or 25 or 30 / 0; 97 / 25 / 1
5299-30-42 semi-low-floor Cummins ISB6,7e4 270B Diesel Euro-4 Voith D854.5Е or ZF 6AP1200B 105 (90) (91) / 25 or 39 or 40 / 0 or 1
5299-30-52 semi-low-floor Cummins ISB6.7e5 250B Diesel Euro-5 Voith D854.5Е or ZF 6AP1200B 105 / 25 / 0 or 1
5299-40-42 low-floor Cummins ISB6,7e4 270B Diesel Euro-4 Voith D854.5Е or ZF 6AP1200B 97 / 20 or 24 / 1
5299-40-52 low-floor Cummins ISB6.7e5 250B Diesel Euro-5 Voith D854.5Е or ZF 6AP1200B 105 / 20 or 24 / 0 or 1
5299-20-31 middle-floor KAMAZ 820.61-260 Gas Euro-4 Voith D854.5Е or ZF 6AP1200B 110 / 25 / 0
5299-30-31 semi-low-floor KAMAZ 820.61-260 Gas Euro-4 Voith D854.5Е or ZF 6AP1200B 105(116) (90) / 25 or 39 or 40 / 0 or 1
5299-30-51 semi-low-floor Daimler М906 LAG.EEV/1 Gas Euro-5 Voith D854.5Е or ZF 6AP1200B 105(116) / 25 / 0 or 1
1
5299-30-55 semi-low-floor Yuchai YC6G260N-50 Gas Euro-5 Voith D854.5Е or ZF 6AP1200B 105(116) / 25 / 0 or 1
5299-40-51 low-floor Daimler М906 LAG.EEV/1 Gas Euro-5 Voith D854.5Е 105(116) / 20 or 24 / 0 or 1
Suburban buses
Voith D854.5Е or ZF 6AP1200B 96 or 89 / 45 / 0
5299-11-42 middle-floor Cummins ISB6,7e4 270B Diesel Euro-4
or ZF 6S1310BO 36 / 36 / 0 (school bus)1; 42 / 42 / 0 (school bus)1
5299-11-31 middle-floor KAMAZ 820.61-260 Gas Euro-4 МКП ZF 6S1310BO or KAMAZ-141 89 / 45 / 0
5299-11-551 middle-floor Yuchai YC6G260N-50 Gas Euro-5 ZF 6S1310BO 89 / 45 / 0
Intercity buses
Voith D854.5Е or ZF 6AP1200B
5299-17-42 middle-floor Cummins ISB6,7e4 270B Diesel Euro-4 73 (71) (69) / 42 or 44 or 46 / 0
or ZF 6S1310BO
Voith D854.5Е or ZF 6AP1200B
5299-37-42 semi-low-floor Cummins ISB6,7e4 270B Diesel Euro-4 or ZF 6S1310BO 71 (69) / 42 or 44 or 46 / 0
5299ТП-10 semi-low-floor Base for trolley bus, the power unit is not included 106 / 25 / 0
5299ЭП-10 semi-low-floor Base for trolley bus, the power unit is not included 101 / 21 / 0
1
limited edition
Comfort for the driver and passengers A ramp for embussing/debussing of low mobility Comfort during long-distance travels
people
Comfort for passengers Conditions for low mobility people Capacious baggage compartment
transportation
110
Small size buses
Small size buses for the city and suburban transport are mounted on KAMAZ-3297 chassis
Technical specifications
Passsenger capacity
Model Application Floor level Engine Fuel Gearbox
(total / seats / seats for disabled persons)
city middle-floor Weichai WP4.1NG150E51 gas FastGear 6DS60T, manual, 6-speed 50 (45) / 20 / 0 (gas)
Cummins automatic
KAMAZ-4308 tourist middle-floor Diesel 28-33 Peru
6ISBe 210B1 Allison, T270R, 6-speed
city/ suburban / Cummins automatic Venezuela,
KAMAZ-4308 middle-floor Diesel 32
intercity 6ISBe 210B1 Allison, T270 R, 6-speed Columbia
1
Euro-5 versions with Cummins ISB4.5E5 185 and ISB6.7E5 210 engines are under development
112
Electrical buses
Electrical bus is pollution-free and noiseless passenger transport. Just like a trolley bus, the electrical bus is driven by electrical haulage,
but it is not connected to any overhead system.
The model range of KAMAZ electrical buses currently includes two large size and compact models.
KAMAZ-6282 KAMAZ-2257
Large
KAMAZ-6282 12155х2500х3500 19000 85/24 Asynchronous 2х115 100 lithium-titanate
size
114
KAMAZ Foreign Trade
Information on service and
dealer network: Company Incorporated
business card:
KAMAZ Foreign Trade Company Incorporated - subsidiary of KAMAZ PTC engaged in the export
of KAMAZ PTC products and sales and service development abroad
The manufacturer reserves the right to change specifications without any notice.
This edition is an advertisement and may not be considered as a normative document
KAMAZ PTC
2018
The latest version of the brochure: