Академический Документы
Профессиональный Документы
Культура Документы
1.1 Description................................................................................................................4
1.2 Login...............................................................................................................................4
2 OLT Configurations................................................................................................................6
2.1.2 Diagnose..................................................................................................................7
2.1.6 Service(SSH/SNMP)..................................................................................................9
1 System Description
1.1 Description
Connect the OLT NMS port to IP network. The OLT default management IP is
192.168.100.1 ,Please set your PC IP to 192.168.100.XXX (e.g.192.168.100.100).
1.2 Login
Please open the brower (now support firefox/chrome/IE 9 and up)
Notice:
1. The default username ‘root’ and password admin ,the same with cli;
2. The super username of ‘root’, only login once in WebGUI or CLI, means that: if
you login to CLI by username root, you can not use root to login WebGUI before
you logout;
3. The login timeout is 5mins, There’s no some operations will be logout
automatically after 5mins
4. You need setting the default language in CLI by using “web-lang en”.
When the cursor is placed on the PON port or GE port, it will show you some brief
informations:
For example, PON port will show how many onu registering, and how many online or
offline onu
2 OLT Configurations
You just change some command in configurations file, you can be success to restore.
Other file will not. Please check it.
4. You can default the OLT configurations
5. Save configurations
2.1.2 Diagnose
Now support ping functions, you can specify some parameters
1. SNMP configuration
It support to config trap server & community
2. SSH Access.
First, you need to add a public key to server.
Notice: you need create a OPENSSH format public key, its type need by legacy,key type
RSA.
4. After done
Add user
6. Add a white list onu, You can specify the ONU ID or onu id is 0 will automatically
distribution the ONU ID
7. Press bandwith button will go to bandwith page
8. You can batch process onu , support operations are delete and reject to deny
list
As you press this ONU Batch management:
You can make a choice to get more than one onu to process
2.2.2 ONU Deny list
IF you bind some onu to this upgrade type, you can check it
Next ,select a file upgrade file and other select upgrade type, select which pon port you want
to upgrade
1. Setting onu basic informations, ONU NAME and descriptions(After input information,
just apply)
2. Reboot ONU
3. Deregister ONU
4. Change fec mode
5. Refresh the ONU optical diagnose
6. Upgrade this ONU firmware
Select a file and apply
3.Configure multicast max group: Only if the ONU multicast mode is configurable as igmp-
snooping, the configuration will revert to the default value when the ONU multicast mode
switches from igmp-snooping to another mode.The default is 64.
Configure multicast VLAN mode translate ,up to 8 group translation can be configured.
5.Configure multicast VLAN. Only if the ONU multicast mode is configurable as igmp-
snooping,when the ONU multicast mode switches from igmp-snooping to another mode, the
multicast VLAN will be cleared.Each port can be configured with up to 8 multicast vlans.
Here, you can change port vlan type to hybrid/access/trunk. And then, you can config the
port default vlan
2. Add some vlan to this port, and change these vlans tag mode
Also , You can delete vlan now
Create a vlan
If you only create one vlan, input the same vlan; or create multi-vlan, please input range
Also, you can delete one vlan or delete a range
If setting ok: you will get some result ,it shows below:
Setting port
10.Display multicast table,there are static multicast table items and dynamic multicast
table,static multicast table do not aging.