Академический Документы
Профессиональный Документы
Культура Документы
co n n e c t i on
RS-232
1、RS-485 po i n t t o poi n t
RS-232 to RS-485 converter
UT-2217 manual T/R+
T/R-
GND
GND
DB9 female, Rs485 in binding post. Plug-and-play and reliable UT-2217 RS-485
3、UT-2217 t o UT-2 2 1 7
1. Interface: RS-232C and RS485 1、Point to point
2. Rs232 side in DB9 female; Rs485 in binding post. 2、Point to multi-point
T/R+ T/R+
3.Protection: 600W surge protection each line RS-485. For Rs485 bus, a terminal resister perhaps should be used T/R- T/R-
GND GND
Spec: 120 ohm; 1/4W GND GND
4. Operation mode: asynchronous half duplex.
6.Indicator: Power (PWR), Send (TXD) and Receive (RXD). 5 . Appearence UT-2217 UT-2217
7.Media: twisted pair cable or shielded cable. VI. Problems and resolutions
1. Data communication failure
8. Baud rate: 115.2K BPS to 300M, A. Make sure RS-232 interface connection is correct.
B. Make sure RS-485/RS-422 output interface
51mm
38.4K BPS to 2.4KM
RS-232
RS-232 RS-485
connection is correct.
9,600 BPS to 5KM. CONVERTER C. Make sure power supply is OK.
PWR RS-485