Академический Документы
Профессиональный Документы
Культура Документы
PC210LC-10M0
HYDRAULIC EXCAVATOR
PC210
2
PC210/210LC-10M0
Higher Productivity
•Larger bucket capacity
•Higher stability
•Powerful digging operation and travel performance
Increase Productivity
Large capacity Excellent stability
buckets Bucket capacity
Stability is greatly
Bucket selection up +50 %
improved by increasing
to 1.20 m3 are avail- +25 %
weight of counterweight
able. It can be and extending the rear
matched for various end radius compared
applications. with the PC200-8M0.
1.20 m3 1.00 m3 0.80 m3
Lifting capacity also + 150 mm
Bucket capacity increased by 5%. This
makes a smooth operation feeling, even being equipped
performance. One-touch
P mode
E mode
15% up
5
KOMATSU NEW ENGINE TECHNOLOGIES
ES
Fuel consumption
-26 %
-20 %
Fuel consumption
20% better
(Compared to the PC200-8M0)
Komatsu SAA6D107E-1 engine
EU Stage 3A equivalent
PC210-10M0 PC200-8M0 PC200-8
Based on typical work pattern collected via KOMTRAX.
Fuel consumption varies depending on job condition.
26% better
(Compared to the PC200-8)
(CG image)
6
PC210/210LC-10M0
Maximum production
Fast cycle time
E (Economy mode): Fuel Consumption
Better fuel consumption
7
LOWER MAINTENANCE COST
8
PC210/210LC-10M0
Easy cleaning cooling unit Extended replacement interval Pre-cleaner for dusty condition
Cleanability of the cooling unit has of hydraulic oil filter Even in dusty places, by installing
been improved. It is effective in the The replacement interval of the pre-cleaner coupled with the large air
field of forestry and agriculture. hydraulic oil filter element is extended cleaner, the frequency of cleaning the
• Easier cleaning of the core by by 2.5 times. It con- air cleaner will be reduced. Durability
making the automatic air condi- tributes to reduction has also improved by adopting new
tioner (A/C) capacitor a hinge of maintenance cost. high efficiency pre-cleaner.
structure
• Dustproof net does not require
tools for desorption 2500 h
• Making oil cooler a single piece
from 2 pieces, no more space
1000 h
accumulating dust
Easy maintenance time
management
The monitor informs replacement
time of oil and filters on the LCD
when the replacement interval is Battery disconnect switch
reached.
A battery disconnect switch allows a
technician to disconnect the power
supply and lock out before servicing
or maintenance the machine. Also,
minimize discharge of the battery
during long-term non operation.
Easy to know maintenance
System operating lamp tells the tim-
time when using breaker
ing of disconnect the switch to pre-
In addition to the above functions, it
vent controller failures.
monitors the breaker usage time.
Since the replacement time will be
changed depending on the breaker
Easy oil sampling (Optional)
usage time, monitor can notify the
Easy oil sampling ports are added. optimum
It is important to get sample that is replace-
agitated properly. Using this equip- ment time.
ment will help accurate analysis.
9
HIGHER DURABILITY
High Strength Work Equipment & Frames to Work with Large Bucket.
It has Durability to Withstand Any Application.
Bracket for
quick coupler piping
No need for additional welding when
installing attachment piping or quick
coupler piping in piping less work
equipment.
Arm protector
10
PC210/210LC-10M0
Sealed connector
Waterproof seal
Waterproof seal
Waterproof seal
11
ICT & KOMTRAX
Large Multi-lingual
1 2 3 High Resolution LCD Monitor
A large user-friendly high resolution LCD
7
PC210/210LC -10M0
Indicators
1 Auto-decelerator 6 Fuel gauge
2 Working mode 7 ECO gauge
1 2 3
3 Travel speed 8 Fuel consumption
Function gauge
switches 4 Engine water
Basic temperature gauge 9 Function switches menu
4 5 6
operation
switches
5 Hydraulic oil 10 Language select
temperature gauge
Monitor function
Controller monitors engine oil level, coolant temperature,
battery charge air clogging, etc. If the controller finds any
abnormality, it is displayed on the LCD.
Maintenance function
ECO guidance records Operation records
The monitor informs replacement time of oil and filters on
the LCD when the replacement interval is reached.
12
PC210/210LC-10M0
Location
Working status
Periodic maintenance
This report image is an example of The report contents and data depend on the machine model.
hydraulic excavator
13
SAFETY & COMFORT
Cab guard:
Front full height guard level 1
(ISO 10262) (Optional)
OPG top guard level 2
Thermal guard, fan guard (ISO 10262) (Optional)
Preventing direct contact to high Lock lever
temperature parts or the finger being
caught by fan when checking Pump/Engine room partition
around the engine, by installing ther-
mal guards and fan guard. Large side view, rear and
sidewise mirrors
Large handrail
14
PC210/210LC-10M0
15
BUCKET
Load
Machine power remains low during the majority of the work.
No impact load.
Light Duty
Wear
LD Material is not abrasive.
Soil
Dirt, loam and clay.
Load
Machine power is mostly medium, but occasionally high.
Bucket movements are smooth with minor shock load.
General Bucket penetrates easily.
Purpose
Wear
GP Material is lightly abrasive. Some sand may be medium abrasive.
Soil
Mostly loose sand, gravel and finely broken materials.
Load
Machine power is high during majority of the work.
Medium, but continuous shock load.
Heavy Duty Wear
HD Material is abrasive. Light scratch marks can be seen at the
bucket.
Soil
Limestone, shot rock, compact mix of sand, gravel and clay.
Load
Machine power is high during most of the work, often at maximum.
Dynamic shock loads are frequent and machine may shake.
Extra Heavy
Wear
Duty
Material is very abrasive. Large scratch marks are visible and, or deform metal.
XHD Works within heaps of rock with occasional un-shot rock and rock boulders.
Soil
Granite, basalt, quartz sand, compact and sticky clay.
Bucket Line-up
Width (mm) Boom + Arm (m)
Capacity Without With Weight* Tooth Standard Undercarriage Long Undercarriage Tooth
Category Shape
(m3) Side Shrouds, Side Shrouds, (kg) Quantity (600mm Shoes) (700mm Shoes) Type
Side Cutters Side Cutters 5.7+1.8 5.7+2.4 5.7+2.9 5.7+1.8 5.7+2.4 5.7+2.9
New Shaped 0.80 1080 1185 680 5 HP
Me 0.80 1045 1170 765 5 HP/KMAX2
Me 0.93 1200 1325 770 5 HP/KMAX2
GP
New Shaped 0.94 1220 1325 740 5 HP
Me 1.05 1330 1500 935 6 HP/KMAX2
Me 1.20 1200 1310 910 5 HP
HD Me 1.00 1085 1190 880 5 HP
* With side cutters : Density up to 2.1 t/m3 : Density up to 1.8 t/m3 : Density up to 1.5 t/m3 : Not usable
16
PC210/210LC-10M0
SPECIAL SPEC.
Heavy-duty arm
Stop valve
Operating pedal
Inline filter (Optional)
Main Specification
PC210LC-10M0
Reach 15 m 18 m
17
ATTACHMENT
Hydraulic breaker
The hydraulic breaker is an attachment tool used for crushing rock beds and paved surfaces, demolish-
PC210/210LC -10M0
ing concrete structures, etc. The large gas chamber, ideal gas pressure ratio, and long-stroke piston
deliver a powerful impact force. Since the breaker unit does not require an accumulator, the
number of parts has been reduced, resulting in lower maintenance costs.
Crusher
This attachment tool is used for demolishing concrete structures. Since it does not have a striking mechanism and fea-
tures low noise and low vibration, it is suitable for work in urban areas. The open-close cylinder is equipped with a
speed-up valve for increasing work speed.
Hydraulic Breaker
Crusher
(Primary Crusher)
Crusher
(Pulverizer)
18
PC210/210LC-10M0
SL
Long Life
When removing the fastener, use the correct size socket to
HS rotate the pin-locking shaft 90-degree counter-clockwise.
Heavy Standard
19
KOMATSU TOTAL SUPPORT
PC210/210LC -10M0
20
PC210/210LC-10M0
SPECIFICATION
21
DIMENSIONS
P A
Q
E C
O
F
G M I N
K J
D,L B
22
PC210/210LC-10M0
WORKING RANGE
G
(m)
12
11
10
9
8
7
6
A 5
4
B
3
2
1
0 G.L.
-1
-2
D -3
C
-4
-5
-6
-7
11 10 9 8 7 6 5 4 3 2 1 0
(m)
F
E
23
LIFTING CAPACITY WITH LIFTING MODE
C
PC210/210LC -10M0
24
PC210/210LC-10M0
25
LIFTING CAPACITY WITH LIFTING MODE
C
PC210/210LC -10M0
26
PC210/210LC-10M0
27
LIFTING CAPACITY WITH LIFTING MODE
C
PC210/210LC -10M0
28
PC210/210LC-10M0
29
Major Component Weights
Weight for a Machine (kg)
Items
STD Undercarriage LC Undercarriage
Without ATT Piping 1870
Type A*
Boom With1ATT Piping 1920
5.7 m
(Incl. Piping, Pins, Arm Cylinder) Without ATT Piping 1910
Type B**
With1ATT Piping 1970
Without ATT Piping 1100
2.9 m
With 1ATT Piping 1155
Arm Without ATT Piping 1010
2.4 m
(Incl. Piping, Pins, Bucket Cylinder) With 1ATT Piping 1070
Without ATT Piping 950
1.8 m
With 1ATT Piping 1010
0.80 m3 GP
PC210/210LC -10M0
680
Bucket 0.94 m3 GP 740
(Without Linkage) 1.00 m3 HD 880
1.20 m3 GP 910
STD 45 85
Roller Guards
Full Length 220 265
600 mm 2430 -
Shoe Assembly
700 mm 2810 3060
(With Link)
800 mm 3060 3340
*: for Asia, C.S. America **: for Middle East, Africa note: Area may vary
Standard Specification:
Operating weight: PC210-10M0: 20500 kg
PC210LC-10M0: 21700 kg
Operating weight including below spec.
Boom: 5700 mm STD
Arm: 2925 mm STD
Bucket: 1.00 m3 HD
Shoe: 600 mm triple grouser
700 mm triple grouser (LC)
Counter weight: STD
Track roller guard: STD
Rated capacity of lubricants, coolant, full fuel tank, 80 kg operator.
30
PC210/210LC-10M0
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
Standard/option equipment may change. For more details, please consult your distributer.
31
PC210/210LC -10M0