Академический Документы
Профессиональный Документы
Культура Документы
Slide 1:
Slide 2:
Study advice:
This chapter typically takes 3-4 hours to read and to solve the accompanying problems.
This chapter describes well types and what equipment is installed in wells.
This chapter along with Chapter 2 will be covered in Question 1 of the exam (for more exam details
see the ‘Exam Information’ folder)
Slide 3:
The chapter opens with a discussion of objectives of well completion design. It then presents basics
of bottomhole completion techniques; followed by in-well flow conduit selection considerations.
Slide 4:
In a given well, its bottomhole completion connects the well to the reservoir. In the wellbore, the
fluid flows inside the completion string, a.k.a. the production or injection string depending on the
type of the well.
Slide 5:
The common bottomhole completion techniques, as well as their modifications, are described and
compared.
Slide 6:
Further, the reasons why most wells have completion strings are also provided.
Slide 7:
• Describe the basic well completion design principles and decision areas involved.
• Evaluate for a given reservoir scenario the bottom hole completion options and make a
recommendation based on well integrity and reservoir management requirements.
Slide 8:
The next part of Chapter 1 focusses on the basic functions of a completion string, its design,
objectives and installation, and also provides a brief description of its key components.
Slide 9:
You will see that apart from selection of the tubing itself, the completion string design involves
analysis of multiple equipment integrated into it, such as its Xmas tree, valves, mandrels, packers,
etc. You will learn how they work and what they do.
Slide 10:
• Explain the principles of the tubing grade selection, and the calculations involved.
• Describe the purpose and generic operating principles for major completion equipment
components.
• Assess well safety requirements and capabilities inherent in well design. Identify potential
failure mechanisms/operational problems with equipment.
• Outline the basic logic behind the completion installation practices, and be able to propose a
conceptual installation program for a given well completion.
Slide 11:
Many wells produce from multiple reservoirs or blocks or zones. You will learn what mutli-zone
completion options and strategies exist.
Slide 12:
• Describe the options, and their inherent constraints/advantages, for producing multiple
reservoir units.
• Propose general completion options for producing two, three or more zones simultaneously.
Slide 13:
On top of the conventional wells and completions, the chapter will also briefly introduce the
common advanced well technologies such as horizontal wells, intelligent or smart wells, specialist
wells like e.g. wells used in thermal recovery, and multilateral wells
Slides 14-16:
• Assess and recommend geometrical configurations for drilled wellbores for both production
and injection applications.
• Describe the requirements for and operational principles of intelligent well completions.
• Evaluate for a given reservoir scenario the advanced well completion options and make a
recommendation based on reservoir management requirements.
Slide 17:
Feel free to test your knowledge using the dedicated quiz on VISION