Objective: Students will disassemble their object and record data on chart
Assessment : Chart must be completed fully and posted on weebly
Please use ruler to dimension your parts
Product Name: Toy Airplane
Date: 4 / 1 / 20 Time: 10:45
Texture General Notes
Part Interaction with Part Name Qty Dimensions Function Material and (i.e.; wear, stress # Other Parts Finish indicators) 1 Upper 1 17 Cm Closes and is the design Light Smooth Connects with Plane long x for the top portion of the Plastic With the Lower half Half 14.5 Cm airplane lots of to form the wide x 4 design plane exterior Cm Tall patterns 2 Lower 1 15 Cm Is the design for the lower Light Mostly Connects with Plane long x portion of the plane Plastic Smooth the upper Half Half 4.5 Cm but to form the wide x rough plane exterior. It 3.5 Cm in some also houses the Tall areas wheels. 3 Front 1 0.25 Cm Allows the plane to roll Light, Smooth It connects to Wheel long x being the front wheel but and the bottom of 0.30 Cm thicker round the front of the wide x plastic lower plane half 0.25 Cm Tall
Introduction to Engineering Design Activity 6.4 Product Disassembly Chart – Page 1 4 Rear 1 2.30 Cm Allows the plane to roll Light Smooth This part is Wheels long x 4 being the rear wheels, as plastic, round rested within the Cm wide well as can create force to and a wheels, interior of the x 1.5 Cm accelerate the plane thin with lower plane half, tall forward when reversed metal gear allowing the bar like wheels the stick system out , while in keeping the middle acceleration of system inside connect or
Name: Ucancam V10 Pro Version CNC Engraving Software For CNC Router G Code With Operation Video Disc, Easy To Learn and Operate, Suitable For Windows 7 & 8 Item Code: CS-UCANCAMV10-PRO