Академический Документы
Профессиональный Документы
Культура Документы
LTEFunctional description
Functional overview
The Flexi Multiradio BTS supports the RRC Connection r-establishment procedure. The procedure
is initiated by the UE in RRC connected in case of:
Radio link failure detection due to for example
o expiry of the timer T310 (timer started after detection of physical layer problem)
o random access problem indication from MAC
Integrity check failure indication from lower layers
RRC connection reconfiguration failure
The RRC Connection Re-Establishment Request by the UE will not always be acceptable by the
Target cell. Resons may be:
reason for RRC Re-Establishment was "reconfiguration failure"
The general handling in eNodeB follows the list below:
eNodeB decides to reject the RRC Connection Re-Establishment request and sends the
rejection message towards the UE
eNodeB initates a UE Context Release procedure towards the MME to inform the MME that
the UE was send to idle.