Вы находитесь на странице: 1из 67

H P HP0-176

Design & Implementation of HP SIM for ISS Solutions

Version 1.0
QUESTION NO: 1

When is it required to install the WMI mapper on a Windows-based Central Management Server (CMS)?

A. when at least one device managed by the CMS is running a Linux operating system

B. when at least one device managed by the CMS is running an HP-UX operating system

C. when at least one device managed by the CMS is running an HP OpenVMS operating system

D. when at least one device managed by the CMS is running a Windows operating system

Answer: D

QUESTION NO: 2

A system administrator wants to monitor storage devices with HP SIM. Which Storage Management
Initiative Specification (SMI-S) devices can be managed by HP SIM? Select TWO.

A. NAS servers

B. Smart Array controllers

C. Array controller with Fibre Channel ports

D. Network Storage routers

E. Fabric Switch

Answer: C,E
QUESTION NO: 3

What are the basic types of HP Systems Insight Manager tools? Select THREE.

A. all system aware (ASA)

B. XML-based type aware

C. web launch aware (WLA)

D. Intel system aware (ISA)

E. single-system aware (SSA)

F. multiple-system aware (MSA)

Answer: C,E,F

QUESTION NO: 4

A system administrator wants to verify the World-Wide Name of a storage switch. How can this be
verified using HP SIM?

A. Create a new report and select full details for the appropriate switch.

B. Expand the ports info on the switch system page.

C. Expand the identification info on the switch system page.

D. Use the SMI-S get tool in HP SIM to obtain the World Wide Name.

Answer: B

QUESTION NO: 5
For a Virtual to Physical migration (V2P), you can only use specific physical systems. Which choices do
you have? Select TWO.

A. ProLiant DL360

B. ProLiant Blade server series (except AMD based)

C. ProLiant DL server series

D. ProLiant DL580

E. ProLiant BL20p

Answer: A,E

QUESTION NO: 6

What are the available levels for software status? Select THREE.

A. major (orange)

B. latest (green)

C. critical (red)

D. unknown (question mark)

E. minor (yellow)

F. major (red)

G. current (green)

Answer: A,E,G
QUESTION NO: 7

When performing a Virtual to Virtual migration (V2V), what are some of the prerequisites for the source
virtual machine? Select TWO.

A. Verify that the destination virtual machine host has a VMM license installed.

B. Ensure that all network connections on the source virtual machine guest have DHCP IP addresses.

C. Verify that the source virtual machine guest is powered down or suspended.

D. Verify that the VMM agent is installed on the source virtual machine.

E. Stop the SP SIM management agents on the source virtual machine guest.

Answer: C,D

QUESTION NO: 8

You would like to install Vulnerability and Patch Management on an existing HP System Insight Manager
server. Which software should you install first?

A. Microsoft Internet Information Services (IIS)

B. Harris Stat Scanner

C. HP OpenView Radia

D. Version Control Repository Manager

Answer: A

QUESTION NO: 9
What are features of the Version Control Repository Manager (VCRM)? Select TWO.

A. It is used by the Vulnerability and Patch Management (VPM) pack to update ProLiant Support Packs
when OS updates are performed by VPM.

B. It is used to automatically update the repository managed by the VCRM.

C. It is designed to manage a repository containing ProLiant Support Packs and individual server
components.

D. It is designed to be used only if the Version Control Repository is not installed on the local CMS.

E. It is designed to manage a repository containing all OS patches and drivers.

Answer: B,C

QUESTION NO: 10

Which component within the PMP multi-tier architecture performs the collected data analysis?

A. the PMP engine running on the middle tier

B. the database engine running on the middle tier

C. the PMP analytical engine running on the client machine

D. the HP Insight Management Agents running on the monitored servers

Answer: A

QUESTION NO: 11

You just changed the SNMP community string on a target server and restarted the SNMP service. What
else must you do to enable HP SIM to communicate with the new community string?
A. Restart the HP Insight Server Agents service.

B. Restart the HP Insight Foundation Agents service.

C. Run the Device Identification task.

D. Run the Hardware Status Polling task.

Answer: C

QUESTION NO: 12

When new accounts are created in HP SIM, which items make up the combination of the role-based
authorization? Select THREE.

A. user

B. taskbox

C. password

D. system or system group

E. role-set

F. toolbox

Answer: A,D,F

QUESTION NO: 13

You want to install VMM on an HP SIM 5.0 server that is using an Oracle database. What should you do
before starting the installation?
A. Stop the OpenSSH service on the HP SIM CMS server.

B. Create manually an Oracle Database with a customized database name.

C. Uninstall WMI on the HP SIM CMS server.

D. Install the SQL server proxy layer on the Oracle database.

Answer: B

QUESTION NO: 14

Where is DMI information defined?

A. in a Management Information Format (MIF) file

B. in the globalsettings.props file

C. in a DMI sysOID file

D. in a Management Information Base (MIB) file

Answer: A

QUESTION NO: 15 HOTSPOT

Click the Task button.

Click on the icon you must use to configure the HP SIM home page settings.
Answer: <m x1="681" x2="746" y1="60" y2="76"></m>

QUESTION NO: 16

When HP SIM accesses the SQL database on a Windows CMS, which account is being used?

A. The account credentials of the user that is logged in.

B. The IIS account credential on the CMS server.

C. The account credentials attached to the HP SIM service at the time of installation.

D. The account credentials stored in the HP SIM private keystore.

Answer: C

QUESTION NO: 17

You want to remove a user from the HP SIM database. What should you do with the tasks owned by that
user?

A. Nothing, they get automatically assigned to the administrator.

B. Remove or reassign the tasks before the user is removed.

C. Drag and drop the tasks to another user.


D. Create a copy of these tasks and save under another users name.

Answer: B

QUESTION NO: 18

What is used by the version control feature in HP SIM to perform software and firmware updates?

A. Version Control Update Manager

B. Version Control Repository Manager (VCRM)

C. Version Control Agent (VCA)

D. HP Management agents

Answer: C

QUESTION NO: 19

You want to make a backup of a virtual machine guest with VMM 2.0. Which backup options can you
choose from? Select TWO.

A. backup as a template

B. differential backup with compression

C. encryption of disk files in backup storage

D. automatic deletion of existing backups

E. compression of disk files in backup storage


Answer: D,E

QUESTION NO: 20

Click the Exhibit button.

Which link enables you to configure the performance data collection interval used by the Performance
Management Pack?

A. Trap

B. Management Agents

C. SNMP Agent

D. Security

Answer: B
QUESTION NO: 21

You have recently added a ProLiant BL20p G1 to the server blade enclosure that is monitored by PMP. At
the PMP License Administration page, this new server does not appear in the list of servers. Why?

A. The server has not yet been discovered by HP SIM.

B. The operating system running on this server is not supported.

C. The HP Insight Management Agents on this server are not at the required version.

D. The server is too old and not supported by PMP.

E. The server does not have a valid serial number.

Answer: A

QUESTION NO: 22

Through the HP SIM 5.0 console, how are the HP Insight Management Agents deployed to a new server
running Windows?

A. by using the ProLiant Support Pack

B. by using the Install, Configure, and Repair Agents option

C. by using the First-Time Management Software Deployment CD

D. by using the Install Software and Firmware utility

Answer: A
QUESTION NO: 23

You have finished installing Vulnerability and Patch Management (VPM) on an HP System Insight
Manager server. Once the server is rebooted, which step should you perform next for VPM to function
correctly?

A. Configure the acquisition of vulnerability and patch updates in HP SIM.

B. Run a VPM scan on all managed servers to set a baseline.

C. Run mxtool -a -s VPM to compile the newly installed tool into HP SIM.

D. Contact the Microsoft and RedHat website to configure the download of vulnerability and patch
updates.

Answer: A

QUESTION NO: 24

How do hardware vendors implement Storage Management Initiative Specification (SMI-S)? Select TWO.

A. through a host-installed agent

B. through an agent that must be installed on the device itself

C. through a hardware embedded SMI-S agent

D. through an SNMP to SMI-S layer that is installed on a host

E. through a WBEM to SMI-S layer that is installed on a host

Answer: A,C

QUESTION NO: 25
Which HP SIM procedure determines the system management protocol of a detected device and its
operating system?

A. Polling

B. Data collection

C. Identification

D. Discovery

Answer: C

QUESTION NO: 26 HOTSPOT

Click the Task button.

Click on the spot that will display the System Page for the target server.
Answer: <m x1="237" x2="323" y1="156" y2="171"></m>

QUESTION NO: 27

Which HP SIM component uses the secure HTTP port 50000?

A. WBEM/WMI Mapper

B. SOAP with client certificate authentication

C. Secure Web Server

D. SMH Secure Web Server

Answer: C

QUESTION NO: 28

What kind of task is data collection?

A. a polling task

B. a control task

C. an event task

D. a notification task

Answer: A
QUESTION NO: 29

Which option best describes the HP SIM 5.0 users who can copy, create, edit, or delete reports?

A. collection owners

B. users with full and limited configuration rights

C. users with login access rights to the database

D. collection creators

Answer: B

QUESTION NO: 30

Click the exhibit button.

Why do the Encl_D324KJP3H001 and RACK1 components not have a status icon?
A. These components are not supported.

B. These components have not yet been fully discovered.

C. These components have an old firmware or management agents.

D. These components have an unknown status.

Answer: D

QUESTION NO: 31

Which component, running on the managed nodes, enables the Distributed Task Facility (DTF) to
execute commands on managed nodes running Windows?

A. SSH client

B. Version Control Agent

C. SSH server
D. WMI mapper

Answer: C

QUESTION NO: 32

When creating an Oracle database user for HP SIM, which two roles, at the minimum, must you grant
this user? Select TWO.

A. resource

B. dba

C. operator

D. connect

E. catalog_owner

Answer: B,D

QUESTION NO: 33

When checking the performance of a database server in HP SIM, you notice that there is no
performance data available. What could be a possible cause?

A. The Insight Management agents are not running on the database server.

B. The performance mapper service is not running on the database server.

C. The firmware of the database server is not up-to-date.

D. The performance agent is not installed on the database server.


Answer: A

QUESTION NO: 34

What provides Windows support to WBEM applications?

A. WMI Mapper

B. OpenSSH

C. WBEM service layer

D. Tomcat web server

Answer: A

QUESTION NO: 35

Which protocol requires a special HP SIM component that configures the managed device to send alerts
to the Central Management Server (CMS) because it does not provide alerting capabilities?

A. WMI

B. SNMP

C. HTTP

D. WBEM

E. DMI

Answer: A
QUESTION NO: 36 HOTSPOT

Click the Task button.

Click on the spot that will display the System Management Homepage (SMH) for the target server.

Answer: <m x1="71" x2="94" y1="178" y2="198"></m>

QUESTION NO: 37

What does HP SIM 5.0 require to access management information on an HP ProLiant Server running MS
Windows Server 2003?

A. WMI Mapper proxy

B. SSH-2

C. Open SSH
D. WBEM

E. DMI

Answer: A

QUESTION NO: 38

Click the Exhibit button.

Which link enables you to configure alert destinations used by the SNMP agents?

A. Management Agents

B. Trap

C. Security

D. SNMP Agent
Answer: B

QUESTION NO: 39

You are trying to delete an HP-UX system and receive an error message that HP SIM cannot delete an
HP-UX system that includes a management processor. Why?

A. HP SIM currently cannot make the association of management processor to a server if the system is
based on PA-RISC.

B. The management processor must be deleted first before deleting its corresponding system.

C. The HP-UX system is not running the minimum required version of the HP Insight Management
Agents.

D. HP SIM cannot communicate with the WBEM event providers running on the HP-UX system.

Answer: A

QUESTION NO: 40

On the Systems Management Homepage, which left-pane link will allow you to determine whether you
need to upgrade the HP Insight Management Agents?

A. HP Server Agent

B. HP Storage Agent

C. HP NIC Agent

D. HP Foundation Agent

E. HP Version Control Agent


Answer: E

QUESTION NO: 41

As a system administrator you notice that on the 'all systems' list in HP SIM, the status for some of the
software versions are not available. What is a possible cause? Select TWO.

A. There are insufficient user rights to view the software status of these servers.

B. The version control agent is pointing to a version control repository manager not installed on the HP
SIM server.

C. The software status polling task has not yet run.

D. The trust relationship is not set correctly on the managed server.

E. OpenSSH is not configured properly on the Central Management Server and the managed device.

Answer: C,D

QUESTION NO: 42

When a system administrator attempts to update the firmware on a p-Class GbE2 interconnect switch
using HP SIM, the update is unsuccessful. What could be the reason?

A. The p-Class GbE2 interconnect switch can only be upgraded using the serial connection.

B. The VCA agent on the p-Class GbE2 interconnect switch is not active.

C. The HP SIM server is running on Linux.

D. The p-Class GbE2 interconnect switch is not licensed for firmware upgrades.

Answer: C
QUESTION NO: 43

Where can you generate an SNMP test trap?

A. HP Network applet in Control Panel

B. HP Management Agents applet in Control Panel

C. properties for the SNMP service in Administrative Tools

D. System Protocol Settings in HP SIM

Answer: B

QUESTION NO: 44

You want to remove a user from the HP SIM database. What should you do with the tasks owned by that
user?

A. Nothing, they get automatically assigned to the administrator.

B. Drag and drop the tasks to another user.

C. Create a copy of these tasks and save under another users name.

D. Remove or reassign the tasks before the user is removed.

Answer: D

QUESTION NO: 45
You want to deploy the VMM agent from the CMS to manage Microsoft Virtual Servers. What should
you install first on the VM host server?

A. virtualization layer

B. OpenSSH

C. Secure Sockets Layer

D. IIS

Answer: B

QUESTION NO: 46

When does the HP BladeSystem Integrated Manager change the disabled status of a server blade that
was discovered through its iLO?

A. when you manually add the association between the server blade iLO and the enclosure in which it
resides

B. when the server blade receives an operating system and an IP address and is rediscovered

C. when HP SIM receives an SNMP trap from the server blade iLO

D. when you manually run an HP SIM device status polling task, which interrogates the server blade

Answer: B

QUESTION NO: 47

Which discovery protocol is part of Storage Management Initiative Specification (SMI-S) and allows
computers and other devices to find services in a LAN without prior configuration?
A. Web-based Enterprise Management (WBEM) protocol

B. Common information model (CIM) protocol

C. Service Location Protocol (SLP)

D. Simple Network Management Protocol (SNMP)

Answer: C

QUESTION NO: 48

You want to monitor, from within HP SIM, the performance of a virtual machine guest. What should you
do?

A. Configure the VMM agent to link into the insight management agents.

B. Install the HP SIM management agents on the virtual guest.

C. Install a performance management pack license on the virtual machine guest.

D. Select the VM performance tab from the virtual machine guests system page.

Answer: D

QUESTION NO: 49

What must you do to upgrade your existing HP Insight Manager 7 Service Pack 2.3 environment to HP
SIM 5.0?

A. Upgrade your Insight Manager 7 installation to HP SIM 4.2 first, and then upgrade HP SIM 4.2 to HP
SIM 5.0.
B. Export all the data from your Insight Manager 7 repository, uninstall Insight Manager 7, install HP SIM
5.0, and import your data.

C. Install HP SIM 5.0 in a different folder, and then use the HP SIM 5.0 Data Migration Tool to import the
data from the Insight Manager 7 repository.

D. Run the HP SIM 5.0 installation wizard which automatically upgrades your Insight Manager 7
installation to HP SIM 5.0.

Answer: A

QUESTION NO: 50

A VPM comprehensive vulnerability scan identifies vulnerabilities in which categories? Select THREE.

A. password cracker

B. denial of service vulnerabilities

C. malware like viruses and worms

D. man in the middle attacks

E. spam mailing

F. firmware revisions

Answer: A,B,C

QUESTION NO: 51

What is the purpose of the Secure Shell (SSH) agent?

A. It enables HP SIM integration with existing Windows users and groups.


B. It enables secure network communication between the CMS and the managed nodes.

C. It enables HP SIM to retrieve management information from managed nodes running the Windows
operating system.

D. It enables the CMS to log into the managed system and execute commands through scripts.

Answer: D

QUESTION NO: 52 HOTSPOT

Click the Task button.

Click on the spot which identifies that a component has a minor alarm.
Answer: <m x1="37" x2="64" y1="175" y2="204"></m>

QUESTION NO: 53

How is the Vulnerability and Patch Management (VPM) agent installed on managed systems?

A. manually, by running the ProLiant Support Pack

B. automatically, when the managed system is licensed

C. manually, by running the replicate agent task in HP SIM

D. automatically, when you run the VPM scan

Answer: B

QUESTION NO: 54

You notice that a Microsoft Windows 2000 server is discovered by HP SIM and appears on the HP SIM
home page but not in the PMP License Administration page. Why?

A. Database synchronization issues are preventing PMP from retrieving the list of discovered servers.

B. The PMP sample rate is too high and PMP has not yet discovered this server.

C. This server has HP Insight Management Agents version 6.2, which reports the wrong operating system
name.

D. This server was discovered by the WBEM protocol and has the operating system version appended
with a build number.

Answer: D
QUESTION NO: 55

The system administrator opens the tools menu, and selects the command line tools and only finds
Windows based tools. However, when consulting the documentation, it shows UNIX/Linux commands as
well. What could be a reason?

A. HP SIM is not licensed for UNIX/Linux tools.

B. The UNIX/Linux tools in HP SIM are not enabled.

C. The UNIX/Linux extension pack is not installed.

D. HP SIM only discovered Windows systems.

Answer: D

QUESTION NO: 56

Your Central Management Server (CMS) consists of HP SIM 5.0, PMP 4.x, and an Oracle database. You
have recently added a ProLiant BL40p to the server blade enclosure. You have licensed this server in the
PMP License Administration page and enabled monitoring. However, you cannot perform an offline
analysis of this server. Why?

A. Offline analysis is not supported for discontinued servers such as the ProLiant BL40p.

B. Offline analysis requires a separate table space to be created beforehand in the Oracle database.

C. Offline analysis requires the PMP logging feature to be manually enabled.

D. Offline analysis is supported only with MSDE or Microsoft SQL Server databases.

Answer: C
QUESTION NO: 57

When HP SIM accesses the SQL database on a Windows CMS, which account is being used?

A. The account credentials of the user that is logged in.

B. The account credentials attached to the HP SIM service at the time of installation.

C. The account credentials stored in the HP SIM private keystore.

D. The IIS account credential on the CMS server.

Answer: B

QUESTION NO: 58

You want to deploy the ProLiant Support Pack to a remote ProLiant server by using HP SIM. The remote
server has no management agents installed yet. How should you proceed?

A. Use the Initial ProLiant Support Pack Install and provide the login credentials for the remote server in
the setup wizard.

B. Install OpenSSH first to establish the trust and then use the Install Software and Firmware option.

C. Create a trust relationship between the remote server and the CMS and then use the Install Software
and Firmware option.

D. Create a user on the remote server known by HP SIM and then use the Install Software and Firmware
option.

Answer: A
QUESTION NO: 59

How can OpenSSH be installed and automatically configured on managed Windows systems without
further manual intervention?

A. by using the ProLiant Support Pack installation

B. by running the OpenSSH tool install from the SmartStart CD

C. by using the Install OpenSSH tool from within HP SIM

D. by running the mxagentconfig tool on the managed Windows systems

Answer: C

QUESTION NO: 60

What kind of task is data collection?

A. an event task

B. a polling task

C. a control task

D. a notification task

Answer: B

QUESTION NO: 61
At the HP BladeSystem Integrated Manager homepage you have selected the Blade Enclosure item
under the Tree view. The Save Selection As and Delete buttons are unavailable however the Print button
is available. Why?

A. The HP BladeSystem Integrated Manager is licensed with an evaluation license only.

B. The HP SIM user account you logged in with does not have full configuration rights.

C. The Save Selection As and Delete buttons are not available for server blade enclosures.

D. At least one server within the selected blade enclosure is not running the required version of the HP
Insight Management Agents.

Answer: B

QUESTION NO: 62

When performing a Virtual to Physical migration (V2P), what should you do once the migration is
finished and the physical server has rebooted?

A. Remove the SSH folder from the physical server.

B. Install the VMM agent on the physical server to finalize the migration.

C. Install the latest ProLiant Support Pack (PSP) on the physical machine.

D. Use the Found New Hardware Wizard of the Microsoft OS to install all needed drivers.

Answer: C

QUESTION NO: 63
You want to deploy multiple patches to a server using VPM. Each patch requires a reboot. How will VPM
handle these reboots?

A. VPM gives you the opportunity to suppress each reboot until the last patch is installed.

B. VPM waits for user interaction after each patch is installed.

C. VPM will automatically wait until all patches are installed before rebooting.

D. VPM will automatically reboot after each patch is installed.

Answer: A

QUESTION NO: 64

When a system administrator creates a task to update software and firmware on systems in HP SIM
running Windows, what happens?

A. HP SIM sends update software commands to the VCA on the target systems. The VCA contacts the
VCRM.

B. HP SIM contacts the HP Management Agents on the target systems who take care of the update
process.

C. HP SIM sends update software commands to the VCA on the target systems. The VCA contacts the HP
Management agents to start the update.

D. HP SIM sends update software commands to the VCRM on the target systems. The VCRM contacts
the VCA.

Answer: A

QUESTION NO: 65
What is required for HP Systems Insight Manager 5.0 to correctly associate the ProLiant p-Class server
blade iLOs and the enclosures in which they reside?

A. The server blades must be installed in the enhanced server blade enclosure.

B. The BladeSystem management module firmware must be 2.10 or later.

C. HP Insight Management Agents 5.50 or later must be installed on the server blades.

D. HP BladeSystem Integrated Manager plug-in must be installed on the HP SIM server.

Answer: C

QUESTION NO: 66

Which requirement must be met for the Version Control Repository to be automatically updated?

A. At least one Version Control Agent must be configured to use the VCRM.

B. At the minimum, version 7.40.0.0 of the HP Insight Management Agents must be installed.

C. The Vulnerability and Patch Management Pack (VPM) must be installed, licensed, and running.

D. The VCRM must be licensed with a purchased, not a free or demo, license.

Answer: A

QUESTION NO: 67

What is true about the Distributed Task Facility (DTF)?

A. It is a distributed secure mechanism for launching tools on a managed node.


B. It uses a Certificate Authority (CA) to bind the SSL public key to the authorized user.

C. It is a means of securing the communication between the browser and the CMS.

D. It is used by HP SIM to prevent misuse of an unattended session.

Answer: A

QUESTION NO: 68

HP SIM communicates with the VCA and VCRM using the Secure Task Execution. How is this enabled?

A. by importing the SSH public key into the Systems Management Home (SMH) homepage

B. by configuring the VCRM to trust the VCA

C. by importing the SSH private key into the SMH homepage

D. by configuring the SMH page to trust the CMS

Answer: D

QUESTION NO: 69

One of your monitored servers receives a new IP address from the DHCP server. After the next
discovery, HP SIM displays this system as a new entry, whereas the previous entry for the same system
is marked with a critical status. Why?

A. The DHCP server has not yet reconciled all the scopes.

B. The DNS server is not configured on the network.

C. The DNS forward lookup zone has not been configured.


D. The DHCP server is not configured properly and has not expired the old IP address.

Answer: B

QUESTION NO: 70

How does PMP determine its sample rate?

A. The PMP sample rate is user-defined on the PMP Monitoring Administration page.

B. PMP uses the same sample rate as HP SIM.

C. The PMP sample rate is set to 120 seconds and cannot be changed.

D. PMP uses the same sample rate of the HP Insight Management Agents on the target server.

Answer: D

QUESTION NO: 71

How is the association of a virtual machine guest with its virtual machine host in HP SIM made?

A. by comparing the VMM agents unique ID with the VM guest servers virtualization layer ID

B. by comparing the OpenSSH public key on the virtual machine guest devices with the key on the virtual
machine hosts

C. by matching the Insight Management agents unique SSID of the virtual machine guest devices with
the SSIDs of the virtual machine host

D. by matching the serial number of virtual machine guest devices with the serial numbers of the virtual
machines defined on a virtual machine host
Answer: D

QUESTION NO: 72

In HP SIM, which protocols are used to receive detailed event messages from managed storage devices?
Select TWO.

A. WBEM

B. DMI

C. SMI-S

D. SNMP

E. SSH

Answer: A,D

QUESTION NO: 73

How can OpenSSH be installed and automatically configured on managed Windows systems without
further manual intervention?

A. by running the mxagentconfig tool on the managed Windows systems

B. by using the ProLiant Support Pack installation

C. by using the Install OpenSSH tool from within HP SIM

D. by running the OpenSSH tool install from the SmartStart CD

Answer: C
QUESTION NO: 74

The HP SIM 5.0 discovery process is not reaching systems behind a firewall. Which global protocol
setting must you use to discover these systems?

A. WBEM

B. SMTP

C. TCP protocol

D. ICMP protocol

Answer: C

QUESTION NO: 75

All automatic event handling tasks in HP SIM 5.0 fail with the following error:

Send failed. class could not connect to SMTP host: ipaddress, port 25;java.net.SocketException: Software
caused connection abort:connect Why?

A. The SMTP protocol is not installed or configured incorrectly.

B. The default secure port for HP SIM has been changed.

C. The appropriate version of Java Runtime Engine (JRE) is not installed.

D. An antivirus or firewall software is configured to block traffic on specific ports.

Answer: D
QUESTION NO: 76

Your environment consists of several ProLiant servers monitored by PMP 3.0. Some of these servers are
monitored using demo licenses. After using the Data Migration Tool to upgrade PMP, the servers with
demo licenses are no longer monitored. Why?

A. The Data Migration Tool does not support migrating demo licenses.

B. The PMP upgrade no longer supports demo licenses.

C. Monitoring of servers with demo licenses must be disabled prior to running the Data Migration Tool.

D. Monitoring of all servers must be stopped prior to running the Data Migration Tool.

E. The Data Migration Tool automatically disables monitoring of servers with demo licenses, and they
must be re-enabled manually.

Answer: A

QUESTION NO: 77

Which file must you edit to enable the Common Information Model Object Manager (CIMOM) to listen
on an SSL port other than the default 5989?

A. parmgr-web-tools.xml

B. wbemportlist.xml

C. web.xml

D. ssh.xml

Answer: B
QUESTION NO: 78

What must you do to change the IP address of an existing HP SIM server?

A. Backup the HP SIM repository, uninstall HP SIM only, change the IP address, and reinstall HP SIM.

B. Stop all HP SIM services, change the IP address, execute the HP SIM Migration wizard, and restart the
HP SIM services.

C. Backup the HP SIM repository, uninstall HP SIM and the database, change the IP address, and reinstall
both HP SIM and the database.

D. Change the IP address, update the host name entry in the DNS table on the DNS server, and restart
HP SIM.

Answer: D

QUESTION NO: 79

You have been running an HP SIM server for approximately one year and would like to update the MIBs
to add support for the newly installed servers. How should you proceed? Select TWO.

A. Download the latest MIB update kit from the HP website.

B. Update the local HP SIM management agents on the CMS.

C. Use the VCA running on the CMS to update the MIBs automatically.

D. Use the VCRM functionality in HP SIM to automatically download the latest MIBs.

E. Use the scripting files from the Management CD located in the \MIBs folder.

Answer: A,E
QUESTION NO: 80

What is the purpose of snapshots in HP SIM 5.0?

A. to compare various data collections to the baseline data collection

B. to retrieve basic configuration information about the target system

C. to generate historical performance trends report

D. to execute predefined reports without specifying the target system

Answer: A

QUESTION NO: 81

After running the automatic discovery, you find several 'SNMP unknown device' entries in the system
list. Which utility in HP SIM enables you to modify these entries?

A. System Type Manager (STM)

B. SNMP to WBEM service layer

C. Device Type Manager (DTM)

D. SNMP getconfig utility

Answer: A

QUESTION NO: 82
You need to upgrade the HP BladeSystem p-Class server blade enclosure firmware. You go to the Tools
& Links tab of the HP BladeSystem Integrated Manager but the Rack Upgrade Utility link does not
display. Why?

A. The HP BladeSystem Integrated Manager does not provide this functionality. Instead, you must use
the iLO of the server blade installed in Bay 1 to upgrade the server blade enclosure firmware.

B. The HP BladeSystem Integrated Manager provides this functionality only if you log into HP SIM with
an administrative user account.

C. The HP BladeSystem Integrated Manager provides this functionality only if the server blade in Bay 1
has HP Insight Management Agents 5.50 or later.

D. The HP BladeSystem Integrated Manager does not provide this functionality. Instead, you must use
the Rack Upgrade Utility installed on the server blade by the ProLiant Support Pack.

Answer: D

QUESTION NO: 83

What happens when HP Storage Essentials integrates with HP SIM? Select TWO.

A. SNMP for storage devices is disabled.

B. Storage devices get marked as managed by Storage Essentials.

C. All storage related events are forwarded to Storage Essentials.

D. A new Storage Essentials user is added to HP SIMs user database.

E. Data collection from SMI-S devices in HP SIM is disabled.

Answer: B,E
QUESTION NO: 84

Within Secure Socket Layer (SSL), how are public keys distributed?

A. by digitally signing the SSL key

B. by using the mxagentconfig tool in HP SIM

C. by copying them manually to the managed hosts

D. by placing them within digital certificates

Answer: D

QUESTION NO: 85

How can you get Microsoft patches and vulnerability updates for use in VPM? Select TWO.

A. by mapping the VPM service to the Windows Server Update Services

B. by selecting the acquire updates menu item under VPM in HP SIMs options menu

C. by using the VPM acquisition utility installed on any system other than the HP SIM server

D. by downloading the patches and vulnerability updates from the Microsoft website to the patch
repository

E. by using the VPM acquisition utility on the HP SIM server

Answer: B,C

QUESTION NO: 86

Which HP SIM configuration right allows the user to run discovery of systems and data collection?
A. administrator

B. full

C. operator

D. limited

Answer: B

QUESTION NO: 87

When performing a Physical to Virtual (P2V) migration, what are some of the prerequisites for the HP
SIM CMS? Select TWO.

A. Install the Virtual Machine Manager license on the HP SIM server.

B. Ensure that the HP SIM CMS Windows OS is later than or equal to the source physical machine
Windows OS.

C. Verify that Microsoft iSCSI Initiator 2.0 is installed and running on the HP SIM CMS.

D. Ensure that the virtualization software on the HP SIM CMS is installed on the HP SIM CMS.

E. Temporarily stop the HP management agents on the HP SIM CMS.

Answer: B,C

QUESTION NO: 88

Click the Exhibit button.


You enabled monitoring of the blp1-008 server at 13:01. At what time will PMP display the performance
status of this server?

A. at 13:05

B. at 13:09

C. at 13:03

D. at 13:11

E. at 13:07

Answer: D

QUESTION NO: 89

Which software component has the ability to send detected serviceable traps (Service Traps) to HP SIM
5.0?

A. JDBC

B. WBEM
C. DTF

D. OSEM

Answer: D

QUESTION NO: 90 HOTSPOT

Click the Task button.

Click on the spot that identifies the link to the PMP Monitoring Administration page for the blp1-006
server.

Answer: <m x1="164" x2="183" y1="219" y2="236"></m>


QUESTION NO: 91

Which protocol does HP SIM use to retrieve system software and firmware inventory from HP servers?

A. SNMP

B. MIF

C. SMTP

D. OpenSSH

Answer: A

QUESTION NO: 92

When running a Windows-based system, where does HP SIM 5.0 record various errors, warnings, and
informational events that occur during runtime?

A. in the HP SIM database

B. in the HP SIM audit file

C. in the Windows Application Event Log

D. in the Windows System Event Log

Answer: C

QUESTION NO: 93
All automatic event handling tasks in HP SIM 5.0 fail with the following error:

Send failed. class could not connect to SMTP host: ipaddress, port 25;java.net.SocketException: Software
caused connection abort:connect Why?

A. The SMTP protocol is not installed or configured incorrectly.

B. The appropriate version of Java Runtime Engine (JRE) is not installed.

C. The default secure port for HP SIM has been changed.

D. An antivirus or firewall software is configured to block traffic on specific ports.

Answer: D

QUESTION NO: 94

How does VPM react when a patch is corrupted during installation?

A. VPM uninstalls the patch automatically and sends an update to HP SIM.

B. VPM waits for the next patch download and re-installs the patch.

C. The update stops and sends a warning event to the HP SIM console.

D. The patches are automatically reinstalled to bring the system to the desired patch level.

Answer: D

QUESTION NO: 95

Which security protocol is used by HP SIM for Secure Task Execution and Single Login?
A. SSL

B. WBEM

C. HTTPS

D. DTF

Answer: A

QUESTION NO: 96

You want to deploy the SMP agent to the server. How should you proceed?

A. Deploy the license to the server using license manager in HP SIM. The agent is automatically installed
with the license.

B. Deploy the ProLiant Support Pack to the server. The SMP agent is included.

C. Select Install SMP agent from the deploy drivers, firmware and agents menu in HP SIM.

D. Select the SMP Agent manager in HP SIM to deploy the agent.

Answer: C

QUESTION NO: 97

How many licenses are needed to perform a Physical to Virtual (P2V) migration using SMP?

A. one license is required per migration

B. one for the virtual machine, one for the physical machine and one for the SMP software
C. one for the virtual machine and one for the physical machine

D. one for the migration, one for the SMP software

Answer: A

QUESTION NO: 98

When a system administrator creates a task to update software and firmware on systems in HP SIM
running Windows, what happens?

A. HP SIM sends update software commands to the VCA on the target systems. The VCA contacts the HP
Management agents to start the update.

B. HP SIM sends update software commands to the VCRM on the target systems. The VCRM contacts the
VCA.

C. HP SIM contacts the HP Management Agents on the target systems who take care of the update
process.

D. HP SIM sends update software commands to the VCA on the target systems. The VCA contacts the
VCRM.

Answer: D

QUESTION NO: 99

What is a feature of the Version Control Agent (VCA)? Select TWO.

A. The VCA uses SSH to securely communicate with the VCRM.

B. The VCA retrieves software and firmware inventory from the managed system.
C. The VCA is used to install firmware updates on ProLiant BL-p network switches.

D. The VCA logs activities, such as software installations.

E. The VCA can use a remote repository that is not managed by a VCRM.

Answer: B,D

QUESTION NO: 100

When performing a Physical to Virtual (P2V) migration, what are some of the prerequisites for the
source physical machine? Select TWO.

A. Verify that all partitions on the source physical machine have a valid file system and are in a healthy
state.

B. Verify that the source physical machine contains only RAID5 disk arrays.

C. Ensure that the VMM agent is installed on the source physical machine.

D. Assign a static IP address to the source physical machine.

E. Temporarily disable the management agents on the source physical machine.

Answer: A,E

QUESTION NO: 101

You just finished installing HP SIM and want to discover new devices on the network. Besides automatic
and manual discovery, which option is available?

A. Use a database tool to add the device directly into HP SIM.

B. Import an LMHOSTS file.


C. Import a HOSTS file.

D. Use the mxdiscovery command.

Answer: C

QUESTION NO: 102

How can you verify the unallocated space on a Enterprise Virtual Array (EVA) system using HP SIM?

A. Expand the capacity information on the EVA system page.

B. Expand the storage volumes information on the EVA system page.

C. Use the SMI-S get tool in HP SIM to obtain the unallocated space.

D. Create a new report and select full details for the EVA system.

Answer: A

QUESTION NO: 103

Which statements are true for the Version Control Agent (VCA)? Select THREE.

A. The VCA is available for SuSE Linux.

B. The VCA is only supported on ProLiant servers.

C. The VCA requires a license per monitored server.

D. The VCA compares the installed firmware revisions with the baseline created in the VCRM.

E. The Systems Management Homepage must be installed prior to installing the VCA.
F. The VCA is supported on Integrity servers running HP-UX.

Answer: A,D,E

QUESTION NO: 104

One of your monitored servers receives a new IP address from the DHCP server. After the next
discovery, HP SIM displays this system as a new entry, whereas the previous entry for the same system
is marked with a critical status. Why?

A. The DHCP server is not configured properly and has not expired the old IP address.

B. The DNS server is not configured on the network.

C. The DHCP server has not yet reconciled all the scopes.

D. The DNS forward lookup zone has not been configured.

Answer: B

QUESTION NO: 105

Which protocols are used in HP SIM to query events from failing devices? Select TWO.

A. SNMP

B. Windows Management Instrumentation (WMI)

C. SSL

D. Web-Based Enterprise Management (WBEM)

E. HTTP
Answer: A,B

QUESTION NO: 106 HOTSPOT

Click the Task button.

Click on the link that you must use to configure the HP SIM automatic discovery settings.

Answer: <m x1="586" x2="647" y1="15" y2="33"></m>

QUESTION NO: 107 DRAG DROP

Click the Task button.

Match the term with its definition.


Answer: <m x1="7" x2="119" y1="247" y2="278" ss="0" a="0"></m><m x1="137" x2="246" y1="246"
y2="276" ss="0" a="1"></m><m x1="263" x2="375" y1="246" y2="277" ss="0" a="2"></m><m x1="390"
x2="503" y1="247" y2="276" ss="0" a="3"></m><m x1="15" x2="127" y1="61" y2="92" ss="1"
a="0"></m><m x1="14" x2="126" y1="100" y2="132" ss="1" a="1"></m><m x1="15" x2="126" y1="143"
y2="171" ss="1" a="2"></m><m x1="11" x2="125" y1="181" y2="214" ss="1" a="3"></m><c start="1"
stop="0"></c><c start="3" stop="1"></c><c start="2" stop="2"></c><c start="0" stop="3"></c>

QUESTION NO: 108

To authenticate the Central Management Server (CMS) when issuing CLI commands, each managed
system must have which key in its trusted key store?

A. the SSL private key from the CMS

B. the SSH public key from the CMS

C. the SSH private key from the CMS

D. the SSL certificate from the CMS

Answer: B
QUESTION NO: 109

The system administrator opens the tools menu, and selects the command line tools and only finds
Windows based tools. However, when consulting the documentation, it shows UNIX/Linux commands as
well. What could be a reason?

A. The UNIX/Linux tools in HP SIM are not enabled.

B. The UNIX/Linux extension pack is not installed.

C. HP SIM only discovered Windows systems.

D. HP SIM is not licensed for UNIX/Linux tools.

Answer: C

QUESTION NO: 110

How does HP SIM ensure data integrity and privacy during communication between the web browser
and the Central Management Server (CMS)?

A. by using the Distributed Task Facility (DTF) and secure task execution

B. by using the Secure Shell (SSH) protocol and SSH keys

C. by using Secure Sockets Layer (SSL) and trust certificates

D. by using three-way authentication

Answer: C
QUESTION NO: 111

A system administrator checks the installed firmware versions on an Itanium system running HP-UX and
discovers that the status is unknown. What could be the issue?

A. The trust relationship between the Itanium system and the CMS is not set up.

B. The Version Control Agent (VCA) is not installed on the Itanium server.

C. Itanium systems are not supported in HP SIM.

D. HP-UX is not supported in the Version Control Architecture.

Answer: D

QUESTION NO: 112

You notice that the performance (PF) column is missing from the HP SIM 5.0 homepage. Why?

A. The Performance Management Pack has not been installed or has been removed.

B. The PF column must be manually added to the HP SIM homepage.

C. The Performance Management Pack has not yet been licensed.

D. The PF column only displays when you log into HP SIM with administrative privileges.

Answer: A

QUESTION NO: 113 HOTSPOT

Click the Task button.


Click on the correct spot that represents the configuration area where you can prevent display of
multiple security alerts while browsing to the web-based management agents.

Answer: <m x1="187" x2="273" y1="213" y2="233"></m>

QUESTION NO: 114

You want to create a template from a virtual machine guest. What should you do before creating the
template?

A. Stop the virtual machine guest.


B. Compress the virtual machine guest.

C. Pause the virtual machine guest.

D. Suspend the virtual machine guest to disk.

Answer: A

QUESTION NO: 115

What is a Certificate Authority (CA) used for?

A. It is used by the HP SIM server to self-sign the digital certificates used to prevent IP spoofing.

B. It acts as a guarantor of the binding between public key and the identity information contained in
certificates it issues.

C. It warrants the HP SIM server with a certificate stating that all possible security issues are tackled.

D. It distributes the SSL public key to the managed hosts in a secure way.

Answer: B

QUESTION NO: 116

In branch office installations of HP SIM, where the CMS resides on a desktop or a workstation and
manages up to 75 systems, which component or components must be installed on the managed devices
running Windows or Linux?

A. management agents, SSH, and VCRM

B. management agents and VCA

C. management agents only


D. management agents and SSH

Answer: D

QUESTION NO: 117

Click the Exhibit button.

Which MX command generated the output shown in the exhibit?

A. mxtoolbox

B. mxuser

C. mxauth

D. mxtool
Answer: D

QUESTION NO: 118

Which methods are used by HP SIM to discover new storage device types on the network? Select TWO.

A. DMI

B. WBEM

C. SNMP

D. WMI

E. SMI-S

Answer: C,E

QUESTION NO: 119

You would like to increase the sample rate for Performance Management Pack (PMP) on a Windows
server. Where can you change this setting?

A. in the SNMP settings for the HP Management Agents in Control panel

B. in HP SIM; select the sample rate on the settings page

C. in HP SIM; select tasks, PMP, polling interval

D. on the Monitoring Administration page in PMP

Answer: A
QUESTION NO: 120

Which main components are included in the Server Migration Pack? Select TWO.

A. Server Migration Pack SIM Plug-ins

B. Server Migration Pack Agent

C. Server Migration Service Layer

D. Server Migration Pack Event receiver

E. Server Migration Pack virtualization layer

Answer: A,B

QUESTION NO: 121

If a server is licensed but not marked for monitoring, what status will be displayed in the PF column of
the HP SIM homepage? Select TWO.

A. Normal

B. Major

C. Minor

D. Unknown

E. Critical

Answer: A,D
QUESTION NO: 122

Where do you configure the SNMP trap destinations?

A. properties for the SNMP service in Administrative Tools

B. System Protocol Settings in HP SIM

C. HP Network applet in Control Panel

D. HP Management Agents applet in Control Panel

Answer: A

QUESTION NO: 123 HOTSPOT

Click the Task button.

Click on the spot which identifies that a component is out of service or unreachable.
Answer: <m x1="37" x2="65" y1="85" y2="113"></m>

QUESTION NO: 124

A system administrator checks the installed firmware versions on an Itanium system running HP-UX and
discovers that the status is unknown. What could be the issue?

A. HP-UX is not supported in the Version Control Architecture.

B. The trust relationship between the Itanium system and the CMS is not set up.

C. The Version Control Agent (VCA) is not installed on the Itanium server.

D. Itanium systems are not supported in HP SIM.


Answer: A

Вам также может понравиться