Академический Документы
Профессиональный Документы
Культура Документы
CGS00421017
Question 1
It is perhaps easier to clarify the definition of sustainability at the other extreme and set out
features of ‘unsustainability’. Unsustainable development is usually associated with ozone
depletion, poor sanitation, extinction of species and habitat, social conflict, toxic pollution
and resource depletion. Action plans to address these problems gave birth to the
sustainable movements; movements on concerns about the future capacity of the planet to
sustain life.
A useful starting point, therefore, comes from confirmation that sustainability embraces the
three themes of environmental, social and economic accountability – often known as the
triple bottom line. Sustainability can be achieved by minimizing negative impacts and
maximizing benefits. The best way of doing this is to look for solutions that solve more than
one problem at a time. These solutions are known as ‘win-win-win’, as they secure
economic, social and environmental benefits simultaneously. Win-win solutions and triple
bottom lines are an ideal way of thinking about sustainability as they emphasize the need to
integrate social, environmental and economic issues.
Perhaps, the most well-known definition of sustainable development comes from the
Bruntland report which states: ‘Development that meets the needs of the present without
compromising the ability of future generations to meet their own needs.’ (WCED 1987:43).
This report refers to the 1987 report of the World Commission on Environment and
Development after the commission’s chair, the former Prime Minister of Norway, Gro Harlem
Bruntland. This report was translated into 24 languages and popularized the idea of
sustainable development as being concerned with intergenerational equity and justice.
Question 1
b. “The construction industry is responsible for consuming around 40% of world resources and
energy and emits almost 40% Green House Gases.” Discuss this statement in the light of
the current global environmental issues.
In several countries, construction has been identified as the first sector to require specific
attention in meeting the sustainable agenda. There are several reasons for this. First, in
sustainable development terms, construction is consistently responsible for some of the
most profound negative impacts. The construction industry consumes more raw materials
than any other industrial sector and is responsible for a significant proportion of Europe’s
waste stream. The United Kingdom construction industry provides a tenth of the UK’s gross
domestic product and employs 1.4 million people. It is responsible for over 25% of all
industry-related pollution incidents. It is estimated that 70 million tonnes of construction and
demolition materials end up as waste every year; of which 13 million tonnes comprises
material delivered to sites and thrown away unused (DETR 2000:10). The energy used in
constructing, occupying and operating buildings is responsible for about 50% of the UK’s
greenhouse gas emissions. Our buildings are less healthy, less efficient, generate more
waste, and are more polluting and more costly to run.
What is more worrying is this trend would not be changing any time soon. In nearly every
sector of the economy, technological advancement has fuelled several changes to business
attitudes. For example, the manufacturing industry has become leaner, cleaner and more
efficient at all tasks. However, most of the construction process continues to be
unsustainable and the industry does not seem likely to make any changes on its own
accord. As Sir John Fairclough (2002:30) confirmed in the recommendations to his report,
construction is presently ‘perceived as dirty, dangerous and old fashioned’, and to address
this problem it needs to be seen as central to achieving a sustainable future. Similar
sentiments are echoed throughout the world. For example, to paraphrase the opening
paragraph of a review of the state of construction in Singapore: the construction industry in
many parts of the world has a poor image and it can easily be singled out from the rest of
the economy by attitudes, technologies, processes and a culture that are at least half a
century old (Dulaimi et al. 2001:1).
It is therefore of paramount importance that the construction industry regulate itself to rid
itself off the entire negative connotation when the agenda of sustainability is discussed. In
practical terms, sustainable construction can be reduced to three important messages for
the way the industry should work.
Buildings and infrastructure projects should become more cost effective to produce
and run, because they have been constructed with less and yield more.
Question 2 (a)
One of the major environmental areas of deterioration is the depletion of the ozone layer. As per
the question presented in question 1 (b) above, “The construction industry is responsible for
consuming around 40% of world resources and energy and emits almost 40% Green House
Gases”. Buildings alone are responsible for 38% [1] of all human Green House Gases (GHG)
emissions (20% residential, 18% commercial). It is the industrial sector which contributes the
most to climate change. In the US, construction is also responsible for 46% of carbon dioxide
(CO2) emissions.
Image source; Greenhouse effect: Wikipedia
Since the construction industry is ‘marked’ as the major culprit of climate changes and ozone
depletion, the government must step up their effort to bring this statistic down to a more
manageable level. We already have the litigations in place via the Environmental Act 1974; it is
only the question of implementation and enforcement. I have been working at a project site
building a highway and in my three years there, officers from the Department of Environment
had only visited the site once, surely inadequate to assess my company’s commitment in
protecting the environment. Of course, self-regulating is encouraged, but here in Malaysia more
emphasis is placed on the bottom-line (profit) and anything else not related in making profit will
be thrown out of the window; so to speak. Make it compulsory for officers of DOE to visit project
sites and maybe this attitude will change. Malaysians in general will toe the line when
enforcement is forced in their throat. It is either this or face the consequences of an
unsustainable development culture which subsequently will bring on major environmental
disasters. Remember Bukit Antarabangsa?
Major landslide at Bukit Antarabangsa
Deforestation is the consequences of the never ending thirst of the construction industry to
consume resources, in this case, timber. Analysis of figures from the Food and Agriculture
Organization of the United Nations (FAO) shows that Malaysia’s annual deforestation rate
jumped almost 86 percent between the 1990-2000 period and 2000-2005. In total, Malaysia lost
an average of 140,200 hectares – 0.65 percent of its forest area – per year since 2000. These
declines are mostly attributed to urbanization, agricultural fires, forest conversion for oil palm
plantations and other forms of agriculture. Part of a highway being constructed currently from
Senai to Desaru in Johore cut through numerous palm oil plantations without anything done to
replenish the vegetation destroyed in the name of development. A 1.7kms cable-stayed bridge
is also being constructed across Sg. Johore. The ecological impact of this bridge construction
was never brought out in any meetings I have attended. Are we so hell bent on construction that
we forgot about the consequences of current development on future generation?
Question 2 (b)
Discuss briefly the principles of Sustainable Construction articulated by the CIB [the Conseil
International du Batiment] in 1994.
In 1994, the CIB, an international construction research networking organization, defined the
goal of sustainable construction as ‘……..creating and operating a healthy built environment
based on resource efficiency and ecological design.”[2] The CIB articulated Seven Principles of
Sustainable Construction, which would ideally inform decision making during each phase of the
design and construction process, continuing throughout the building’s entire life cycle. These
seven principles apply across the entire life cycle of construction, from planning to disposal
(herein referred to as deconstruction rather than demolition). Furthermore, these principles were
also applied to the resources needed to create and operate the built environment during its
entire life cycle: land, materials, water, energy, and ecosystems.
The main focus of these seven principles is a resource-conscious design mentality that is
essential in sustainable construction. Ultimately, with this design mentality in place, it is hoped
that dependence on an already declining natural resources could be minimized; as with the
resulting impact on ecological systems.
Closing material loops and eliminating solid, liquid and gaseous emissions are key sustainability
objectives with it comes to material selection with respect to the seven principles of
sustainability construction. Closed loop is a process of keeping resources in productive use via
recycling rather than disposing them as waste. These recycled resources must be inherently
non-toxic to biological systems. Common construction materials are not totally recyclable, but
rather downcyclable, for lower-value reuse such as for fill or road subbase. Fortunately,
aggregates, concrete, fill dirt, block, brick, mortar, tiles, terrazzo, and similar low-technology
materials are composed of inert substances with low ecological toxicity. In the United States, the
140 million tons of construction and demolition waste produced annually comprise about one
third of the total solid waste stream, consuming scarce landfill space, threatening water
supplies, and driving up the cost of construction. As part of the green building delivery system,
manufactured products are evaluated for their life-cycle impacts, to include energy consumption
and emissions during resource extraction, transportation, product manufacturing, and
installation during resource extraction, transportation, product manufacturing, and installation
during construction, operational impacts, and the effects of disposal.
A philosophy of sustainable land use is based upon the principle that land, especially
undeveloped, natural or agricultural land (greenfields) is a precious, finite resource, and its
development should be minimized. Effective planning is essential to create efficient urban forms
and minimizing urban sprawl, which leads to overdependence on automobiles for transportation,
excessive fossil fuel consumption, and higher pollution levels. Like other resources, land is
recyclable and should be restored to productive use whenever possible. “Recycling” disturbed
land such as former industrial zones (brownfields) and blighted urban areas (grayfields) back to
productive use facilitates land conservation and promotes economic and social revitalization in
distressed areas.
Energy conversation could be best practiced by having an effective building design, which
integrates there general approaches:
Passive design employs the building’s geometry, orientation, and mass to condition the
structure using natural and climatological features such as the site’s solar insolation,3 thermal
chimney effects, prevailing winds, local topography, microclimate, and landscaping. Since 30
percent of domestic primary energy is consumed by buildings in the United States, increased
energy efficiency and a shift to renewable energy sources can substantially reduce carbon
dioxide emissions and mitigate climate change.
Availability of potable water is the limiting factor for development and construction in many
areas of the world. Climate alterations and erratic weather patterns precipitated by global
warming threaten to further limit the availability of this most precious resource. Since only a
small portion of the Earth’s hydrological cycle yields potable water, protection of existing ground
and surface water supplies is increasingly critical. Once water is contaminated, it is extremely
difficult, if not impossible, to reverse the damage. Water conservation techniques include the
use of low-flow plumbing fixtures, water recycling, rainwater harvesting, and xeriscaping, a
landscaping method that utilizes drought-resistant plants and resource-conserving techniques.
Innovative approaches to wastewater processing and stormwater management are also
necessary to address the full scope of the building hydrologic cycle.
Sustainable construction considers the role and potential interface of ecosystems in providing
services in synergistic fashion. Integration of ecosystems with the built environment can play an
important role in resource-conscious design. Such integration can supplant conventional
manufactured systems and complex technologies in controlling external building loads,
processing waste, absorbing stormwater, growing food, and providing natural beauty,
sometimes referred to as environmental amenity.
Even though terms such as ecological design, ecologically sustainable design, and green
design are widespread these days, truly sustainable green commercial buildings with renewable
energy systems, closed material loops, and full integration into the landscape are rare to
nonexistent. Most existing green buildings feature incremental improvement over, rather than
radical departure from traditional construction methods. Nonetheless, this process of ‘trial and
error,’ along with the steadily acceptance of incorporation of sustainability principles, continues
to advance the industry’s evolution towards the ultimate goal of achieving complete
sustainability throughout all phases of the built environment’s life cycle.
To conclude, a framework must be developed to satisfy the needs of all parties concerned.
Pressure to produce an acceptable sustainable construction while minimizing cost as well as
causing the environment the least damage is no easy feat. Governments must act as the major
advocator and the front runner in initiating sustainability principles. This will definitely result in
increase in cost and price. In order to soften the cost impact, sustainability must be taken into
account during the design stage whilst at the same time, not to overlook the satisfaction of the
end user; which is one of the important elements to achieve sustainability. And since this
sustainability actions are carried out for the benefit of our future generations, it does not hurt if
governments start in calculate the principles of sustainability in our children, start them young so
that when they are ready to take over from us, they will always have a thought of the
environment in anything they do.
Question 3 (a)
What are “Low Carbon Buildings”?
Buildings alone atone for 38% of all human Greenhouse Gas (GHG) emissions (20%
residential, 18% commercial). The industrial sector is the biggest contributor to Climate Change.
Even so, according to the Intergovernmental Panel on Climate Change (IPCC), it is also the
sector which presents the most cost effective opportunities for GHG reductions.
Low-carbon buildings (LCB) are buildings which are specifically designed and engineered with
GHG reduction in mind. So by definition, a LCB is a building which emits significantly less GHG
than regular buildings.
Question 3 (b)
The ecological footprint is a measure of human demand on the Earth’s ecosystems. It compares
human demand with the Earth’s ecological capacity to regenerate. It represents the amount of
biologically productive land and sea area needed to regenerate the resources a human
population consumes and to absorb and render harmless the corresponding waste. Using this
assessment, it is possible to estimate how much of the Earth (or how many planet Earths) it
would take to support (sustain) humanity if everybody lived a given lifestyle. For 2006,
humanity’s total ecological footprint was estimated at 1.4 planet Earths – in other words,
humanity uses ecological services 1.4 times as fast as Earth can renew them.
William Rees and Mathis Wackernagel suggested that an ecological footprint, referring to the
land area required to support a certain population or activity, could serve as a surrogate
measure for total resource consumption, thus allowing a simple comparison of the resource
consumption of various lifestyles. The ecological footprint is the inverse of carrying capacity,
and represents the amount land needed to support a given population. An ecological footprint
calculation indicates that, for example, the Dutch need a land area 15 times larger than that of
The Netherlands to support their population. The population of London, England, requires a land
area 125 times greater than its physical footprint. If everyone on Earth enjoyed a North
American lifestyle, it would take up to five planet Earths, owing to the increasingly consumptive
U.S. lifestyle and the burgeoning world population, which exceeds 6 billion currently according
to the United States Census Bureau. The ultimate problem that must be solved, especially in the
context of sustainable development, is how all the people can have a decent quality of life
without destroying the planetary systems that support life itself. A partial solution requires
developed countries to dramatically reduce consumption and to ensure that developing
countries receive resources sufficient for more than mere survival. Such resource sharing lies at
the heart of the original formulation of sustainable development, which values the goal of
moving the developing world from mere survival to the ability to sustain a reasonably good
quality of life. As William Rees notes in the preface to the book, Our Ecological Footprint, “On a
finite planet, at human carrying capacity, a society driven mainly by selfish individualism has all
the potential for sustainability of a collection of angry scorpions in a bottle.”
Question 3 (c)
Calculate your carbon and H20 foot prints based on your energy and water consumptions per
year.
Question 4
Discuss the NINE (9) bases for Ecological Design suggested by Ken Yeang in his books,
“Designing with Nature” (1985) and “Ecodesign – A Manual for Ecological Design” (2008)
Give FIVE (5) examples of Ken Yeang’s prominent works accompanied by your comments.
Dr. Ken Yeang was born in 1948 and is a prolific Malaysian architect and writer best known for
developing environmental design solutions for high-rise buildings in the tropics. Yeang is
regarded as the father or inventor of the bioclimatic skyscraper, largely attributed to his book
The Skyscraper: Bioclimatically Considered (1997, John Wiley and Sons). His early work which
incorporated bioclimatic principles as passive low-energy design, led to his ecologically
sustainable agenda. Early experiments include the Roof-Roof House in Kuala Lumpur (1985),
providing a louvered umbrella structure over the building.
Roof-Roof House
Yeang’s ecomasterplans establish, through design, a single living system that is both interactive
yet functional and requires biointegration of four ecoinfrastructural armatures in order to be an
overall coherent system:
1) Green infrastructure which includes nature’s corridors and networks that link open
spaces and habitats for flora and fauna;
2) Grey infrastructure which includes sustainable engineering system such as roads,
drainage, sewage, and utilities;
4) Red infrastructure which includes the built environment, enclosures, and hardscapes
and human socio-economic and political systems.
Yeang also suggested nine numbers of premises or bases for ecological design and there are
as follows:
1. Design must be integrated not only with the environment, but also with the ecosystems
that are present.
2. Because Earth is essentially a closed system, matter, energy, and ecosystems must be
conserved and the biosphere’s waste assimilation capacity considered.
Whatever natural resources that have been consumed, such as natural gas, it will take
million of years to replenish or in a worst case scenario, would never ever be replaced
again. In view of this, Dr. Yeang championed the cause of preserving earth’s natural
resources as much as possible when designing buildings. Usage of material such as
plastic, which take ages to decomposed must be curbed, or at least, lessen. A cleaner
and better ways to dispose of waste should be developed.
3. The context of the ecosystem, its relationship with other ecosystems, must be
considered.
4. Designers must analyze and use each site for its physical and natural structures to
optimize the design.
Optimizing design does not only benefit the environment but it could also have an impact
on the profitability of the project. Hence it is wise for designers to carefully study the site
as to minimize the effect of the development to the environment and ecosystems, to use
the physical and natural structures to its ecological design advantages and at the same
time, saves on the monetary resources.
5. The impact of the design must be considered over its entire life cycle.
For an ecological design to be effective, the design must take into consideration the
entire life cycle of the built environment. This design paradigm is sometimes referred to
as ‘cradle to grave’ design meaning every aspect of the design; from conception to the
deconstruction of the built environment must be factored in into the design. It could
comprise of materials to be used in the construction, optimizing its power requirements,
how waste is treated, how the surrounding environment(s) protected etc.
It is an undeniable fact that whatever development is taking place, it will displace the
ecosystems in its surrounding area. It is the responsibility of the designers whom
embraces the thought school of ecological design to minimize the impact, and to try their
hardest so that the built environment could co-exist harmoniously with its environment. A
system to replace what has been destroyed must be in place to mitigate the impact on
the ecosystems affected.
7. Due to the complex impacts of built environments on nature, the design must be
approached holistically rather than in a fragmented manner.
8. The limited assimilative capacity of ecosystems for human induced waste must be
factored into design.
Hoping that the ecosystem will correct and cleanses whatever humans throw at her is
folly. Ecosystem does not have the capacity nor the urgency to adept itself to face the
torrent of human induced waste. Ecological designers must factor in whatever help they
could summon to support and help the ecosystems in eliminating the waste.
Forward thinking should be accorded to the environment and the ecosystem, and
actions to protect them should be proactive rather than reactive. Through experience,
this anticipatory response should not be a problem for designers. Ways and means
should be sought to further enhance what has already been in place. Better methods
should be introduced and research and development hasten for the benefits of the
environment.
Dr. Yeang in upholding his beliefs and principles with regards to ecodesign has thus far
designed over 200 projects since 1975. Among his more prominent works are:
• National Library of Singapore (2005) - Dr. Yeang applied all of his expertise on
designing buildings to suit its climate surrounding to the National Library of
Singapore. The building has sweeping facade on the east, a vast array of
projecting blades and shelves, and a UFO-shaped viewing pavilion hovering
above the roof. These moves help animate what could have been a large, squat
building—630,000 square feet and only 16 stories high. And by carving deep
recesses and skycourts into the white blocky form, Dr. Yeang creates a lively
play of shadow and light that not only pleases the eye but offers cool spaces for
people using the building.
• DiGi Technical Office, Kuala Lumpur (2010) - The façades of the Data Centre
are designed with vertical green walls that act as living walls and as means of
filtering and improving a building’s indoor air quality. Green walls are a living,
breathing, regenerating type of cladding that can be as simple as a living art
installation or as complex as a biological air filter. Green walls, both indoors and
out, decrease local CO2, increase local humidity, trap dust, reduce noise and
create a habitat for urban wildlife. Exterior green wall installations reduce solar
gain (the entrapment of heat by passive solar gain on the building surface) and,
by extension, building energy costs; provide protection from the effects of UV
radiation and acid rain; and help lessen the building’s contribution to the heat
island effect (when forest is replaced with concrete and asphalt, causing urban
centers to become warmer than nature areas).
Question 5 (a)
• Green buildings are designed to save energy and resources, recycle materials and
minimize the emissions of toxic substances throughout its life cycle.
• Green buildings harmonize with the local climate, traditions, culture and the surrounding
environment.
• Green buildings are able to sustain and improve the quality of human life whilst
maintaining the capacity of the ecosystem at local and global levels.
• Green buildings make efficient use of resources; have significant operational savings
and increases workplace productivity.
• Building green sends the right message about a company or organization – that it is well
run, responsible, and committed to the future.
Question 5 (b)
The Green Building Index [GBI] is Malaysia’s industry recognized green rating tool for buildings
to promote sustainability in the built environment and raise awareness among Developers,
Architects, Engineers, Planners, Designers, Contractors and the Public about environmental
issues and our responsibility to the future generations.
The GBI rating tools provide a guideline for architects, developers and building owners to design
and construct green, sustainability buildings that can provide energy savings, water savings, a
healthier indoor environment, better connectivity to public transport and the adoption of
recycling and greenery for their projects and reduce our impact on the environment.
GBI is developed with Malaysia’s unique characteristics in mind; tropical climate, environmental
and development context, cultural and social needs and is created to:
• Promote integrated, whole-building designs that provides a better environment for all;
• Recognize and reward environmental leadership;
• Transform the built environment to reduce its negative environmental impact; and
• Ensure new buildings remain relevant in the future and existing buildings are refurbished
and upgraded to improve the overall quality of our building stock.
Question 5 (c)
Apply the ratings of Malaysia’s GBI to a building of your choice. What is your GBI assessment?
CGS00421017