Академический Документы
Профессиональный Документы
Культура Документы
It is better to print with PLA or PETG plastic, it is easier to keep the size of parts.
printed parts
- electronics:
}
- brushed ESC (20 - 30 A)
- battery charger
- screws:
Print Setting
All parts are printed with 2 perimeters and with 100% infill at 0.2mm layerheight.
Exceptions: 0.15 mm layer height for the Servo Arm; 15% infill, 3 perimeters
M3 X 6
5x11x4
5x11x4
M3 X 6
8x12x3.5
M3 X 10
M3 X 8
M3 X 6 M3 X 6
M3 X 6
M3 X 6
M3 X 10
8x12x3.5
M3 X 8
M3 X 10
M3 X 6
8x12x3.5
M3 X 10
M3 X 10
M3 X 10
M3 X 10
M3 X 16
M3 X 8
M3 X 6
M3 X 6
M3 X 10
M3 X 8