Академический Документы
Профессиональный Документы
Культура Документы
Medium Products
Voltage Product
TPU
TPU7x.xx
7x.xx
Indoorcurrent
Indoor current transformers
transformers
Description
The transformers are cast in epoxy resin and designed for insula- Rated primary currents: 10; 15; 20; 25; 30; 40; 50; 60; 75; 100; 150; 200; 300;
tion voltages from 36 kV to 40.5 kV. The transformers are designed 400; 500; 600; 750; 1000; 1250; 1500; 2000; 2500 A. Other primary currents
asDescription
single-or-multiple turn transformers, with one transformer ratio, can be agreed with the manufacturer.
orThe
withtransformers
the possibility to becast
are switched over onresin
in epoxy the secondary or primary
and designed for Rated secondary
Rated currents: 5are
primary currents A; 10;15;20;25;30;40;50;60;75;100;
1 A (possibility to combine different values in
side. The number of secondary windings are from 1 to 8 (usually 2 sec- one transformer).
insulation voltages from 36 kV to 40.5 kV.
ondary windings), depending on the combination of parameters (such 150;200;300;400;500;600;750;1000;1250;1500; 2000;2500 A.
Rated frequency: 50 Hz or 60 Hz.
asThe
thetransformers
accuracy class,are designed
shortcircuit as single-or-multiple
current, turnThe
overcurrent factor…). Other primary currents
The transformers canand
are designed be manufactured
agreed with inthe manufacturer.
conformity with the follow-
secondary windings
transformers, withareone
usedtransformer
for measurement or protection
ratio, purposes,
or with the possibility Rated secondary
ing standards currents...5 A; IEC,
and recommendations: 1 A ANSI,
(possibility to GOST
VDE, BS, combineand CSN.
or for special use (testing winding, „PX“ class windings ..). One terminal Cantilevervalues
strength:
to be switched over on the secondary or primary side. different in5one
kN transformer)
of each secondary winding used and one terminal of short-circuited and Permissable torques for screw connections:
The
not number
used windingofhave
secondary windings
to be earthed during are from 1 to operation.
the transformer 8 (usually Rated
M5 frequency
max /Nm/ ... …3.5
50 Hz; min
60 /Nm/…2.8
Hz
2 secondary windings), depending on the combination
The secondary windings are lead out into a casted secondary of
terminal The
M8 transformers
max /Nm/are designed
…20 and manufactured in conform-
min /Nm/…16
board. The transformer can be mounted in any position.
parameters (such as the accuracy class, short-circuit current, The transformer M12
ity with themax /Nm/ …70
following min /Nm/…56
standards and recommendations:
are fixed by four screws, the M8 bolted earthing clamp finds itself on the
overcurrent
transformer factor…).
base plate. IEC, ANSI, VDE, BS, GOST and CSN.
The secondary windings are used for measurement or protec- Cantilever strength: 5 kN
tion purposes, or for special use (testing winding, „X“ class Permissable torques for screw connections
windings ..). One terminal of each secondary winding used M5 max /Nm/ …3,5 min /Nm/…2,8
and one terminal of short-circuited and not used winding have M8 max /Nm/ …20 min /Nm/…16
to be earthed during the transformer operation. M12 max /Nm/ …70 min /Nm/…56
The secondary windings are lead out into a casted secondary
terminal board. The transformer can be mounted in any posi-
tion. The transformer are fixed by four screws, the M8 bolted
earthing clamp finds itself on the transformer base plate.
Dimensional Drawings
TPU 7x.xx
TPU
TPU 70.43
70.43 WEIGHT:
WEIGHT: 30-40kg
30-40kg TPU 74.43
TPU 74.43 WEIGHT:
WEIGHT:43kg
43kg
TPU 73.43 CREEPAGE DISTANCE:
CREEPAGE 380mm
DISTANCE: 380mm
TPU 75.43
TPU 75.43 CREEPAGE DISTANCE:
CREEPAGE 377mm
DISTANCE: 377mm
TPU 76.43
TPU 76.43
2
260 260
450
450
390
390
Pg16 14 Pg16 14
4
4
39
39
161 161
22
22
185 150 185 150
M8 32 120 32 M8 32 120 32
14
14
217,5
217,5
217,5
217,5
110
250
110
250
80
60
L
L
68 M12 70 M12
14
14
10 135 15 10 135 15
295
Dimensions 295
335 335
TPU 70.51 WEIGHT: appr. 49kg TPU 70.52 WEIGHT: appr. 49kg
TPU 70.51 WEIGHT:
CREP. appr.400mm
DISTANCE: 49kg TPU 70.52 WEIGHT:
CREP. appr.409mm
DISTANCE: 49kg
TPU 73.51 TPU 73.52
TPU 73.51 CREEPAGE DISTANCE: 400mm TPU 73.52 CREEPAGE DISTANCE: 409mm
2
2
390
390
14
14
-P
-P
g1
g1
6
6
4
4
40
22
40
22
M
40
12 22,5
80 80
310
40
M8 310 M8
M
8
190
190
220
190
190
220
L
L
P1 P2 P1 C1C2 P2
140 140
12
12
285
285
295 15
295 15
365
365
2 TPU 70.53 WEIGHT: appr. 49kg TPU 70.54 WEIGHT: appr. 49kg
CREP. DISTANCE: 397mm CREP. DISTANCE: 409mm
TPU 73.53 TPU 73.54
285
295 15
295 15
365
365
TPU 70.53
TPU 70.53
WEIGHT: appr.
WEIGHT: appr.49kg
49kg TPU 70.54
TPU 70.54
WEIGHT: appr.
WEIGHT: 49kg
appr. 49kg
TPU 73.53 CREEPAGE DISTANCE:
CREP. DISTANCE:397mm
397mm TPU 73.54 CREEPAGECREP.
DISTANCE:
DISTANCE:409mm
409mm
TPU 73.53 TPU 73.54
2
2
450
450
390
390
14
14
-P
-P
g1
g1
6
6
4
4
40
40
22
22
187 155
187 155 32 120 32
208 208
32 120 32 22,5
M1
2
24
24
M
60
12 22,5
67 67 310
40
M8 310 M8
M
8
190
190
220
190
190
220
85
85
L
L
P1 P2 P1 C1C2 P2
140 140
12
12
285
285
295 15
295 15
365
365
L=96mm for 6 or 12 clamps Drawing n. Polarity L=96mm for 6 or 12 clamps Drawing n. Polarity
Drawing
L=122mm for 16n.clamps Polarity Drawing
L=122mm for 16 n.
clamps Polarity
P1 to secondary P1 to secondary
44615650 P1 to 44615650
secondary term.terminal 44615710 P1 to 44615710
secondary term.terminal
44615660 P2 to 44615660
secondary term.P2 to secondary 44615720 P2 to 44615720
secondary term.P2 to secondary
terminal terminal
TPU 74.51 WEIGHT: appr. 49kg TPU 74.53 WEIGHT: appr. 49kg
2 TPU 74.51 WEIGHT: appr. 49kg TPU 74.53 WEIGHT: appr. 49kg
TPU 75.51 CREEPAGECREP.
DISTANCE: 386mm
DISTANCE: 386mm TPU 75.53 CREEPAGECREP.
DISTANCE: 386mm
DISTANCE: 386mm
TPU 75.51 TPU 75.53
TPU 76.51 TPU 76.53
TPU 76.51 TPU 76.53
2
450
390
390
14
-P
g1
14
6
-Pg
16
4
4
40
22
40
22
187 155
32 120 32
M
12 187 155
208
32 120 32
208
M
40
80
12
40
80
310 80 80
M8
80 80
M8 310
190
190
220
L
P1 P2
190
190
110
220
L
P1 P2
140
12
285 140
12
295 15 285
365 295 15
365
3
TPU 70.63 WEIGHT: appr. 78kg TPU 70.64 WEIGHT: appr. 78kg
CREP. DISTANCE: 463mm CREP. DISTANCE: 456mm
12
285 140
12
295 15 285
365 295 15
365
TPU 70.63 WEIGHT: appr. 78kg TPU 70.64 WEIGHT: appr. 78kg
TPUTPU 73.63
70.63 CREEPAGE DISTANCE: 463mm
WEIGHT: appr. 78kg TPU
TPU 73.64
70.64 CREEPAGE DISTANCE: 456mm
WEIGHT: appr. 78kg
CREP. DISTANCE: 463mm CREP. DISTANCE: 456mm
TPU 73.63 TPU 73.64
2
450
450
390
390
14
14
-P
-P
g1
g1
6
6
40
22
40
22
225 200 32 120 32
225 200
32 120 32
246 223 M
12
4
246 223
4
22,5
60
24
24
M1
22,5
67 67
2
M8
M8
40
M8
225
113
160
225
260
L
225
113
160
225
260
L
P1 P2
P1 P2
12
185 185 12
375 375
385 15
385 15
446
446
L=96mm for 6 or 12 clamps Drawing n. Polarity L=96mm for 6 or 12 clamps Drawing n. Polarity
L=122mm for 16 clamps L=122mm for 16 clamps
Drawing n. Polarity
44615570
P1 to secondary Drawing n. Polarity
44615610
P1 to secondary
terminal terminal
44615570 P1 to secondary term. 44615610 P1 to secondary term.
P2 to secondary P2 to secondary
44615580 446157620
44615580 P2 to secondary term.terminal 44615620 P2 to secondary term.terminal
TPU
TPU 70.66
70.66 WEIGHT: appr.
WEIGHT: appr.78kg
78kg TPU
TPU 74.63
74.63 WEIGHT: appr.
WEIGHT: 78kg
appr. 78kg
TPU 73.66 CREEPAGECREP.
DISTANCE:
DISTANCE:413mm
413mm TPU 75.63 CREEPAGECREP.
DISTANCE: 463mm
DISTANCE: 463mm 3
TPU 73.66 TPU 75.63
TPU 76.63
TPU 76.63
2
2
450
450
390
390
14
14
-P
-P
g1
g1
6
6
40
40
22
22
12 M1
4
2
60
40
80
67 67
M8 M8 80 80
225
113
160
225
260
225
113
160
225
260
L
P1 P2 P1 P2
12 12
185 375
375 385 15
446
385 15
446
4
12
285 140
12
295 15 285
365 295 15
365
TPU 70.61 WEIGHT: appr. 78kg TPU 74.61 WEIGHT: appr. 78kg
TPUTPU 73.61
70.63 CREEPAGE DISTANCE: 463mm
WEIGHT: appr. 78kg TPU
TPU 75.61
70.64 CREEPAGE DISTANCE: 463mm
WEIGHT: appr. 78kg
CREP. DISTANCE: 463mm TPU 76.61 CREP. DISTANCE: 456mm
TPU 73.63 TPU 73.64
2
450
450
390
390
14
14
-P
-P
g1
g1
6
6
40
22
40
22
225 200 32 120 32
225 200
32 120 32
246 223 M
12
4
246 223
4
22,5
60
24
24
M1
22,5
67 67
2
M8
M8
40
M8
225
113
160
225
260
L
225
113
160
225
260
L
P1 P2
P1 P2
12
185 185 12
375 375
385 15
385 15
446
446
TPU 70.71 WEIGHT: appr. 56kg TPU 70.73 WEIGHT: appr. 56kg
TPU 70.71 CREEPAGE DISTANCE: 410mm
WEIGHT: 56kg TPU 70.73 CREEPAGE DISTANCE: 410mm
WEIGHT: 56kg
3
CREEPAGE DISTANCE: 410mm CREEPAGE DISTANCE: 410mm
320
320
2
450
390
390
Pg
16 Pg
16
14 14
4
39
4
39
191,5
22
191,5
22
215 165
215 165
14
M8 32 120 32
M8 32 120 32
14
217,5
217,5
240
250
60
217,5
217,5
L
110
240
250
60
L
M12
14
M12
14
10 68 150 15
68 150 15
10 295
295 380
5
TPU 74.71 WEIGHT: appr. 58kg TPU 74.73 WEIGHT: appr. 58kg
TPU
TPU 75.7174.71 CREEPAGE DISTANCE: 410mm
WEIGHT: 58kg TPU
TPU 75.7374.73 CREEPAGE DISTANCE: 410mm
WEIGHT: 58kg
TPU
TPU 76.7175.71 CREEPAGE DISTANCE: 410mm TPU
TPU 76.7375.73 CREEPAGE DISTANCE: 410mm
2
390
450
Pg
390
16
14
Pg
16
4
14
39
4
191,5
22
39
215 165
22
14
M8 32 120 32
32 120 32 M8
14
217,5
217,5
217,5
240
250
40
80
110
240
250
L
40
80
M12 L
14
14 70 M12
10 70 150 15 150 15
295 10 295
380
L= 96mm for 6 or 12 clamps
L=122mm
L=96mm for 6 for 16 clamps
or 12 clamps L= 96mm
L=96mm for 6foror612
or 12 clamps
clamps
Drawing n. Polarity L= 122mm for 16 clamps Drawing n. Polarity
L=122mm for 16 clamps L=122mm for 16 clamps
P1 to secondary P1 to secondary
1VL4600846R0101 Draving n. 1VL4600846R0101
Polarity
Drawing n. Polarity terminal terminal
1VL4600994R0101 P1 to secondary terminal 1VL4600993R0101 P1 to secondary terminal
1VL4600994R0102 P2 to secondary1VL4600846R0102
terminal P2 to secondary 1VL4600993R0102 P2 to secondary terminal P2 to secondary
1VL4600846R0102
terminal terminal
TPU x x . x x
voltage current dimension primary terminals
Code designation - TPU current transformers
7..up to 36-(40,5)
Code designation TPUkVcurrent
0… 5 A - 600 A multiturn
transformers 5..short, narrow 220mm 1..no pr.rec., no ribs /40x80mm, 80x80mm/
TPU x x 3…to 1250 A singleturn . x 6..long, wide 260mm x rec., no ribs /40x80mm,/
2..prim.
TPUvoltage x current
4…to 1500 Ax singleturn . transformer dimension
x
7..short, narrow 220mm, 3..noprimary terminals
pr.rec., with x
ribs /40x80mm, 60x67mm, 80x80mm/
7..up to 36voltage
(40.5) kV 5…to
0… 5 2000
A - 600 AAmultiturn
singleturn
current base
4..shortest, plate 260mm
transformer 4..prim.
1..norec., withrec.,
prim. ribs /40x80mm/
no
primary ribs /40 x 80 mm,
terminals
6…to 2500 A singleturn 335 x 250 x 390 mm 5..no80 x 80 mm/
pr.rec., with ribs /80x80mm-6xM12/
Marking
Marking of of current
current transformer
transformer outletsoutlets
a) Single-core design | b) Double-core design | c) Three-core design | d) Single-core design, reconnectable on the secondary side | e) Double-core
design, reconnectable on the secondary side | f) Double-core design, reconnectable on the primary side
a) Single-core design | b) Double-core design | c) Three-core design | d) Single-core design, reconnectable on the secondary side |
a) Single-core design | b) Double-core design | c) Three-core design | d) Single-core design, reconnectable on the secondary side | e) Double-core
e) Double-core design, reconnectable on the secondary side | f) Double-core design, reconnectable on the primary side
design, reconnectable on the secondary side | f) Double-core design, reconnectable on the primary side
Secondary
Secondary terminal box
terminal box
6
5
Standartized transformers
Type Ithn Ratio Burden class FS/ALF Type Ithn Ratio Burden class FS/ALF
TPU 70.51 6.3/16 kA 10//5 A 30 VA 10P 5 TPU 70.51 31.5/80 kA 60//5 A 30 VA 5P 5
TPU 70.51 6.3/16 kA 10//5 A 15 VA 0.5 FS5 TPU 70.51 31.5/80 kA 60//5/5 A 15/15 VA 0.5/10P FS5/10
TPU 70.51 6.3/16 kA 10//5/5 A 10/15 VA 0.5/10P FS5/5 TPU 70.51 50/125 kA 60//5 A 30 VA 10P 5
TPU 70.51 6.3/16 kA 10//5/5 A 15/15 VA 3/10P 5/5 TPU 70.51 50/125 kA 60//5/5 A 10/15 VA 0.5/10P FS5/5
TPU 70.51 10/25 kA 10//5 A 15 VA 10P 5 TPU 70.51 50/125 kA 60//5/5 A 15/15 VA 3/10P 10/5
TPU 70.51 10/25 kA 10//5/5 A 5/10 VA 0.5/10P FS5/5 TPU 70.51 31,5/80 kA 75//5 A 30 VA 5P 10
TPU 70.51 10/25 kA 10//5/5 A 15/10 VA 3/10P 5/5 TPU 70.51 31,5/80 kA 75//5/5 A 15/15 VA 0.5/10P FS5/10
TPU 70.51 10/25 kA 15//5 A 15 VA 10P 5 TPU 70.51 50/125 kA 75//5 A 30 VA 5P 5
TPU 70.51 10/25 kA 15//5/5 A 10/15 VA 0.5/10P FS5/5 TPU 70.51 50/125 kA 75//5/5 A 10/15 VA 0.5/10P FS5/5
TPU 70.51 10/25 kA 15//5/5 A 15/15 VA 3/10P 5/5 TPU 70.51 31.5/80 kA 100//5 A 30 VA 5P 5
TPU 70.51 16/40 kA 15//5 A 15 VA 10P 5 TPU 70.51 31.5/80 kA 100//5/5 A 15/15 VA 0.5/10P FS5/10
TPU 70.51 16/40 kA 15//5/5 A 5/10 VA 0.5/10P FS5/5 TPU 70.51 50/125 kA 100//5 A 20 VA 5P 10
TPU 70.51 16/40 kA 15//5/5 A 15/10 VA 3/10P 5/5 TPU 70.51 50/125 kA 100//5/5 A 10/15 VA 0.5/10P FS5/10
TPU 70.51 16/40 kA 20//5 A 30 VA 10P 5 TPU 70.51 31.5/80 kA 150//5 A 30 VA 5P 10
TPU 70.51 16/40 kA 20//5/5 A 10/15 VA 0.5/10P FS5/5 TPU 70.51 31.5/80 kA 150//5/5 A 15/15 VA 0.5/10P FS10/10
TPU 70.51 16/40 kA 20//5/5 A 15/15 VA 3/10P 5/5 TPU 70.51 50/12 kA 150//5 A 30 VA 5P 5
TPU 70.51 31.5/80 kA 20//5 A 15 VA 10P 5 TPU 70.51 50/12 kA 150//5/5 A 10/15 VA 0.5/10P FS10/10
TPU 70.51 31.5/80 kA 20//5/5 A 5/10 VA 0.5/10P FS5/5 TPU 70.51 50/12 kA 200//5 A 30 VA 5P 10
TPU 70.51 31.5/80 kA 20//5/5 A 15/10 VA 3/10P 5/5 TPU 70.51 50/12 kA 200//5/5 A 15/15 VA 0.5/10P FS10/10
TPU 70.51 20/50 kA 25//5 A 30 VA 10P 5 TPU 70.51 50/12 kA 200//5 A 30 VA 5P 10
TPU 70.51 20/50 kA 25//5/5 A 10/15 VA 0.5/10P FS5/5 TPU 70.51 50/12 kA 200//5/5 A 15/15 VA 0.5/10P FS10/10
TPU 70.51 20/50 kA 25//5/5 A 15/15 VA 3/10P 5/5 TPU 70.51 50/12 kA 300//5 A 30 VA 5P 10
TPU 70.51 40/100 kA 25//5 A 15 VA 10P 5 TPU 70.51 50/12 kA 300//5/5 A 15/15 VA 0.5/10P FS10/10
TPU 70.51 40/100 kA 25//5/5 A 5/10 VA 0.5/10P FS5/5 TPU 70.51 50/12 kA 400//5 A 30 VA 5P 10
TPU 70.51 40/100 kA 25//5/5 A 15/10 VA 3/10P 5/5 TPU 70.51 50/12 kA 400//5/5 A 15/15 VA 0.5/10P FS10/10
TPU 70.51 25/63 kA 30//5 A 30 VA 10P 5 TPU 70.51 50/12 kA 500//5 A 30 VA 5P 15
TPU 70.51 25/63 kA 30//5/5 A 10/15 VA 0.5/10P FS5/5 TPU 70.51 50/12 kA 500//5/5 A 15/15 VA 0.5/10P FS10/10
TPU 70.51 25/63 kA 30//5/5 A 15/15 VA 3/10P 5/5 TPU 70.51 50/12 kA 600//5 A 30 VA 5P 15
TPU 70.51 31.5/80 kA 30//5 A 30 VA 10P 5 TPU 70.51 50/12 kA 600//5/5 A 15/30 VA 0.5/10P FS10/10
TPU 70.51 31.5/80 kA 30//5/5 A 15/15 VA 3/10P 5/5 TPU 70.51 63/160 kA 750//5 A 30 VA 5P 10
TPU 70.51 40/100 kA 30//5 A 15 VA 10P 5 TPU 70.51 63/160 kA 750//5/5 A 15/15 VA 0.5/10P FS10/10
TPU 70.51 40/100 kA 30//5/5 A 5/10 VA 0.5/10P FS5/5 TPU 70.51 80/200 kA 1000//5 A 30 VA 5P 15
TPU 70.51 40/100 kA 30//5/5 A 15/10 VA 3/10P 5/5 TPU 70.51 80/200 kA 1000//5/5 A 30/15 VA 0.5/10P FS5/10
TPU 70.51 31.5/80 kA 40//5 A 30 VA 5P 5 TPU 70.51 80/200 kA 1250//5 A 30 VA 5P 15
TPU 70.51 31.5/80 kA 40//5/5 A 15/15 VA 0.5/10P FS5/5 TPU 70.51 80/200 kA 1250//5/5 A 30/30 VA 0.5/10P FS10/10
TPU 70.51 50/125 kA 40//5 A 15 VA 10P 5/5 TPU 70.51 100/250 kA 1500//5 A 30 VA 5P 15
TPU 70.51 50/125 kA 40//5/5 A 5/10 VA 0.5/10P FS5/5 TPU 70.51 100/250 kA 1500//5/5 A 30/30 VA 0.5/10P FS10/10
TPU 70.51 50/125 kA 40//5/5 A 15/10 VA 3/10P 5/5 TPU 70.51 100/250 kA 2000//5 A 60 VA 5P 10
TPU 70.51 31.5/80 kA 50//5 A 30 VA 5P 5 TPU 70.51 100/250 kA 2000//5/5 A 30/30 VA 0.5/10P FS10/10
TPU 70.51 31.5/80 kA 50//5/5 A 15/15 VA 0.5/10P FS5/10 TPU 70.51 100/250 kA 2500//5 A 30 VA 5P 15
TPU 70.51 50/125 kA 50//5 A 30 VA 10P 5 TPU 70.51 100/250 kA 2500//5/5 A 30/60 VA 0.5/10P FS10/10
TPU 70.51 50/125 kA 50//5/5 A 10/15 0.5/10P FS5/5
TPU 70.51 50/125 kA 50//5/5 A 15/15 3/10P 5/5 other on request
7
Contact us:
ABB s.r.o. The data and illustrations are not binding. We reserve the right to make changes
without notice in the course of technical development of the product.