Академический Документы
Профессиональный Документы
Культура Документы
Main turns on Power Supply. Power supply turns on low voltage signals
and PS ON is159 sent to the logic PCB.
When Logic Board sees PS ON, it sends Vs ON command to the Power
Supply and stayson if no failures in the circuit are detected (1 second
delay).
The LVDS Cable 10 Bit Digital Video information from the Main Board is
processed by the logic board. The LVDS receiver translates the video
data from the Main Board.
The Logic Board produces the Set, Scan, & Sustain signals and send it
to the Y Board
The Logic Board produces the Erase & Sustain Signals to the X-Board
The Logic Board produces the Address Pulses to the Logic Buffer
Boards determining which cells to light. during the 10 sweeps of Scan
operation per frame.