Академический Документы
Профессиональный Документы
Культура Документы
cd
Portable Pressure
Calibrator
• Accuracy ±0.075% F.S.
• Integral Pressure Generation
• Standard ranges up to 300 psi g
• 5 digit LCD, multiple engineering units
• Dual pressure & electrical readout
• Transmitter supply & measurement
• Current loop verification test
• Vacuum Generation available
DPI 603
Portable Pressure Calibrator
DISPLAYS
KEYPAD NOMENCLATURE
Main Display
±0.075% F.S. accuracy
99999 capability
On/Off control
Voltage Measurement
Selection
Pressure Units
and Scroll for
Current Measurement
24 engineering units
Selection
DPI 603
Portable Pressure Calibrator
STANDARD SPECIFICATION OPTIONS
Pressure Measurement Specification Electrical Specification
(A) Pressure/ Vacuum Capability
Operating Pressure Ranges Electrical Inputs A switch facility enables the integral handpump to
Standard full scale ranges can be specified of Voltage Measurement: generate pressure in the down stroke to a
-14.7 psi g to : Range : ±50V maximum of 300 psi or vacuum on the reverse
+15psi, +30 psi, 100 psi, or 300 psi gauge. Accuracy : ±0.15% of reading stroke to -22 inHg.
±0.02% F.S.
Overpressure Temperature Coefficient : ±0.006% reading/oF. (B) Rechargeable Batteries
The rated pressure can be exceeded by 2 x
NiCad rechargeable cells supplied complete with
causing negligible calibration change, subject Current Measurements:
an external 110 Vac charger unit.
to a maximum safe working pressure of Range : ±55mA
350 psi. Accuracy : ±0.075% of reading
Note :
European 230Vac charger available as
±0.005% F.S.
Pressure Media P/N 191-057 alternate.
Temperature Coefficient : ±0.006% reading/oF.
Dry, non-corrosive, non-conductive gasses ACCESSORIES
compatible with 316 Stainless Steel, Hastelloy Electrical Outputs
C276, BUNA-N and Nylon. Voltage outputs: 24V nominal, floating,
Carrying Case, Electrical test probes, 4 standard
Accuracy 25mA maximum
“D” cells*, calibration certificate and User
Combined non-linearity, hysteresis and Current Output: Loop check,
Handbook supplied with instrument.
repeatability ±0.075% F.S. for positive or fixed 12mA nominal,
negative pressures ±1 digit. source or sink. *Not fitted when Option B is ordered.
Temperature Effects ORDERING INFORMATION
Power Supply
Over 32o to 105o, the averaged Span Battery powered 4 x 1.5V zinc carbon ‘D’ cells,
temperature coefficient will not exceed 0.007% 50 hours nominal continuous operation with no Please state the following (where applicable):
of reading/oF. load on output terminals. Battery low condition 1) Type number
indicated by display symbol. 2) Pressure range
Digital Indicator
3) Options
Readout and Display Optional rechargeable batteries and external power 4) Pressure media
±99999 capability, 0.54” LCD digits with adaptor/charger unit available.
RELATED PRODUCTS
additional 16 text characters.
Environmental Specification
Pressure Scale Units
Druck manufactures a comprehensive range of
24 scale units are provided: Temperature
pressure transducers, transmitters, indicators,
psi, lb/ft2, inHg, inH2O, ft of H2O (40° and Operating 15o to 120oF
controllers, calibrators and temperature calibrators.
68°F) torr, atm, Pa, kPa, MPa, hPa, mbar, bar, Calibrated 32o to 105oF
The range of portable calibrators also covers
kg/cm3, kg/m2, mmHg, cmHg, mHg, mmH2O, Storage -5o to +140oF.
temperature and electrical parameters including
cmH2O, mH2O, Special,
RTDs thermocouples, volts, current, Ohms,
2 units are presented on the display. Sealing
frequency and digital sensor trim for frequency.
Sealed to NEMA 4.
Display Overload
Instruments are capable of nominal 100% F.S. Please refer to manufacturer for further information
Safety
Above this, an overrange error code is and data sheets.
IEC 1010
displayed. EMC Immunity to IEC 801-804
CALIBRATION STANDARDS
Resolution Certification : CE Marked.
±0.005% F.S. maximum.
Instruments manufactured by Druck are calibrated
Physical Specification
Response against precision pressure calibration equipment
Nominal rate of three readings per second on Weight which is traceable to the National Institute of
the digital display. 9 lbs Standards and Technology (NIST).
Zero Control Dimensions
Offset correction for pressure and electrical 12.6” x 7.7” x 5.0” nominal
scales by key-press, protected against
accidental use. Pressure Connection Druck is an ISO 9001
Calibration Controls 1/8” NPT female. registered company.
Front panel key-pad calibration controls for
pressure and electrical ranges. Carrying Case
Supplied with the instrument as standard and
Position Effect includes a complete set of accessories.
Negligible.
PNEUMATIC OPTIONS
Volume Adjust
Vent Valve
DPI 603
Portable Pressure Calibrator
Pressure Connection
Sealed Battery
Compartment
Release Valve
Volume Adjust
Optional Pressure/
Vacuum Switch
Hand Pump
Carrying Case
PRESSURE OUTPUT
2 WIRE TRANSMITTER
SUPPLY +VE
SUPPLY -VE
NOT TO SCALE
Representative