Академический Документы
Профессиональный Документы
Культура Документы
INDIVIDUAL ISOLATION SYSTEM
The ISO‐POD™ is the First Responder and First Receiver’s
individual Bio‐Isolation transport and temporary isolation
holding solution. The EMS Technician can use it in the
transport vehicle or the ER staff can hold a patient in ER hall
or other non‐isolation room until adequate facilities are
available. The ISO‐POD™ can also be used for intra/inter
hospital transport, which would negate the cost and need to
establish dedicated isolation corridors and elevators as
outlined in CDC guidelines/protocols.
Designed to create a negative air pressure environment
when connected to the HEPA Air Filtration System, the
ISO‐POD™ protects healthcare providers. The ISO‐POD™
can also be configured to create a positive pressure environ‐ F EATURES :
ment for burn or immune compromised patients. The flow
of air provided by the filtration system also helps cool and • Constructed from 18 oz. Reinforced white PVC, and
relax the patient. 16 gage clear vinyl material, heavy duty and puncture
resistant.
With the growing risk of outbreaks such as SARS, Avian • 4” wide, gloved access points allows easy, multiple access
Flu, Hepatitis and TB, the flexibility of the ISO‐POD™ points to your patient.
System becomes a compelling need in the event of a • Five flexible arches along the length support the vinyl
pandemic outbreak. above patient allowing voluminous work / patient space.
• 2” wide nylon belt system with 4 hand grips on each side,
enable staff to transport and safely maneuver patient in
ISO‐POD™. .
• Zipper the length of the ISO‐POD™
• Some Models Include Restraint Straps Systems inside to
help maintain patient
• Restraint Straps for securing to the gurney during
transpotation
• Heavy 18 oz. FR rated PVC
• Clear View Windows
• 6 CFM blower unit with rechargeable battery and charger
• 21 Air Exchanges per hour nominal
*Internal Restraint System
• Pass thru ports to allow objects to enter the ISO‐POD™
Available in some models
• Service ports to allow IV, Oxygen lines to exit the
ISO‐POD™
• Waste transfer bag
• ISO‐POD™ can be decontaminated
For Additional Information Contact: 184 Duke of Gloucester Street TEL: 1-410-295-0813
Annapolis, Maryland 21401 FAX: 1-410-295-0821
TRADEWAYS, LTD. United States of America E-MAIL: Office@TradewaysUSA.com
ISO‐POD™ CONFIGURATIONS
Snorkle 1 1 2
Pass Thru No 1 1
2‐HEPA (In) / 1‐OVAG (Out)
Yes Yes Yes
Canisters
Rechargeable 6 Volt, NiMH‐
1 1 1
4 hr Battery & Charger
Transport Bag No Yes Yes
ADDITIONAL PARTS LIST
PART NUMBER NAME DESCRIPTION
2 HEPA, 1 HEPA/OVAG Canisters,
20K0085 Standard Spares KIT for ISO‐POD
7 Pair Nitrile Gloves and 10 nylon ties
20K0083 Filter for ISO‐POD 2 HEPA, 1 HEPA/OVAG Canisters
20K0084 Glove for ISO‐POD 7 Pair Nitrile gloves with 10 nylon ties
20K0086 Kit, ISO‐POD, Ribs, Spine 5 Ribs with buckles, 4 Spine segments
06‐01‐009 Battery Pack 6 Volt, NiMH ISO‐POD Rechargeable Battery
09‐06‐000 Battery Charger, NiMh, 3Pin ISO‐POD Charger
20K0044 Locking Straps, & Pillow Kit for ISO‐POD Internal / External Straps and Head Pillow
05‐10‐020 Blower, ISO‐POD, Canister, 6VDC Blower
TVI Corporation’s continuous development may cause this information and specifications contained herein to change without notice.
TVI Corporation reserves the right to change, modify or discontinue any product listed. Images may be slightly different than actual products.
II-POD-R5_0206 Copyright 2005