Академический Документы
Профессиональный Документы
Культура Документы
1
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Table of Contents
Tutorial 1 – Running an existing program.......................................................................................................................... 3
Start the software ........................................................................................................................................................................ 4
Move the axes to the machine origin .......................................................................................................................................... 4
Select an NC program from the Directory .................................................................................................................................. 4
Define the raw material............................................................................................................................................................... 5
Setting Workpiece Origin............................................................................................................................................................ 5
Mount tools on the magazine ...................................................................................................................................................... 8
Execute the NC program........................................................................................................................................................... 10
Measure the Workpiece............................................................................................................................................................. 11
Tutorial 2 – Importing a program ................................................................................................................................................. 12
Start a new CNC program......................................................................................................................................................... 13
Create a text file with the NC program ..................................................................................................................................... 13
Import the NC program and run it ............................................................................................................................................ 14
Tutorial 3 – Entering a program at the operating panel.............................................................................................. 16
Enter the NC program............................................................................................................................................................... 17
Tutorial 4 – Changing the tool library ................................................................................................................................ 19
Adding a new tool..................................................................................................................................................................... 19
2
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Part drawing
3
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Click on Run.
Unlock the Edit lock by moving the cursor to the key and
pressing on it.
4
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Press the Program mode key , then press the DIR soft key
to see the directory (list) of NC programs in the machine.
Click on OK.
Select probe H:100, D:20 and Feeler gauge h:1.00mm then click
5
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
OK.
Press on or or and or to
move the probe to the appropriate position for taking the reference.
First select X or Y or Z to select the axis of motion, then + or –
continuously.
If the area of contact between probe and workpiece is more, then it will be shown as Feeler gauge: too tight.
If the area of contact between probe and workpiece is very less, then it will be shown as Feeler gauge: too loose.
Select the G54 line with the help of arrow keys on the control panel.
6
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Slowly jog the probe in the positive Z direction to raise it above the
workpiece.
TIP: When setting work coordinate offsets, you must locate X zero and Y zero accurately. Remember that you are measuring the centerline
of the spindle to a location on a part. Hence move the probe by an amount equal to the radius of the probe by adding 1mm feeler gauge
thickness.
Diameter of probe = 20mm
Press on or or and or to
move the probe to the appropriate position for taking the reference.
First select X or Y or Z to select the axis of motion, then + or –
continuously.
7
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Select the G54 line with the help of arrow keys on the control panel.
Slowly jog the probe in the positive Z direction to raise it above the
workpiece.
8
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Click OK to continue.
When you get close to the workpiece press on Inc Jog button
and then click on .This sets the tool to move 0.01mm at each
jog step to touch the tool slowly on the workpiece.
9
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Select the G54 line with the help of arrow keys on the control panel.
Slowly jog the probe in the positive Z direction to raise it above the
workpiece.
TIP: When setting tool length offsets, the absolute machine position for the Z axis should be registered when the MEASUR
button is pressed.
Never run a machine with the door open. It can lead to a serious or even fatal accident.
10
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
11
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Part drawing
12
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Open Notepad and enter or copy the NC program listed here. NC program
O1111
Save the program under the file name as 1111.txt.
G91 G28 Z0.
G91 G28 X0. Y0.
G54 G98 G40 G80 G49 G90
T2M6 (5.00mm.dia.Twist drill)
S1800 M3
G0 G43 Z50. H2
G0 X10. Y30.
G0 Z2.
G1 Z-15. F80 M7
G0 Z2.
G0 X30. Y50.
G1 Z-15.
G0 Z2.
G0 X50. Y70.
G1 Z-15.
13
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
G0 Z2.
G0 X70. Y50.
G1 Z-15.
G0 Z2.
G0 X90. Y30.
G1 Z-15.
G0 Z2.
G0 Z100.
M5
M9
G0 X150. Y150.
M30
Click on the File Open button , select the file 1111.txt that
you just saved. Then click on Open.
Length= 100
Width = 100
Height = 50
14
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
15
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Part drawing
16
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
NC program
Switch to the Edit mode, enter a new program number 2222. O2222
G91 G28 Z0.
Press on the down arrow key to move to the next block. Enter G91 G28 X0. Y0.
the program listed here. G54 G98 G40 G80 G49 G90
T1 M6 (22.0mm.dia.End mill)
S2000 M3
To do this, press G91 G28 Z0 . G0 G43 Z50. H1
G0 X120. Y90.
G0 Z2.
17
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Width = 70
Height = 25
18
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Click on Add , Select the Tool Type as Drill and enter the following
data.
Diameter = 5.0
Height = 120
Click OK to continue.
19
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA
NANJING SWANSOFT TECHNOLOGY COMPANY
Click OK to continue.
20
Tianzheng Guoji Plaza, Suite 5, Room 402, 399 Zhongyang Road, Nanjing, Jiangsu 210037 CHINA