Академический Документы
Профессиональный Документы
Культура Документы
0020 R X Raw Material Test Reports As per applicable code & standard for raw materials
0030 R X Welding procedure specification(WPS) and Procedure Refer to P.O., SAEP-352, ASME Section IX as applicable.
Qualification Records (PQR)
0020
0010
***
W R
In process inspection & test requirement
Workmanship, Components, and Dimensions
Specification Details / Notes:
Per ASTM
0060 W R X Hydrostatic test-. The test shall be conducted after all Each length of pipe shall be tested by the manufacturer to a
manufacturing processes (including repairs and heat treatments) hydrostatic pressure not less than 60 % of the specified
are completed. minimum yield strength
0070 W R X Nondestructive Test -Full Body of Each pipe As per ASTM B829 and other applicable ASTM stds.
0030
0010
***
H X
Final inspection & test requirements
Visual and dimensional inspection
Specification Details / Notes:
Per 01-SAMSS-047 and applicable ASTM std
IR010900 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 10/31/2016 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: 07/09/2015 IR010900 2 of 2
(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0020 W R X Marking Per 01-SAMSS-047 and applicable ASTM std.
Notes:
(1) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.
End of IR010900