0 оценок0% нашли этот документ полезным (0 голосов)
19 просмотров4 страницы
The document provides instructions for connecting a serial suite to an ECU plug for reading and writing the ECU. It specifies connecting the red wire to the red power supply pins and the black wire to the black ground pins. It also shows pictures and describes where to connect the flat cable for reading the ECU, which requires adding one wire bridge, and for writing to the ECU, which requires removing the original bridge and adding two new wire bridges instead.
The document provides instructions for connecting a serial suite to an ECU plug for reading and writing the ECU. It specifies connecting the red wire to the red power supply pins and the black wire to the black ground pins. It also shows pictures and describes where to connect the flat cable for reading the ECU, which requires adding one wire bridge, and for writing to the ECU, which requires removing the original bridge and adding two new wire bridges instead.
The document provides instructions for connecting a serial suite to an ECU plug for reading and writing the ECU. It specifies connecting the red wire to the red power supply pins and the black wire to the black ground pins. It also shows pictures and describes where to connect the flat cable for reading the ECU, which requires adding one wire bridge, and for writing to the ECU, which requires removing the original bridge and adding two new wire bridges instead.
Tel: +39 0342 489060 - Fax: +39 0342 488298 WRITE the ECU: You have to remove 1 bridge used before (picture 1), put other 2 wire(bridge) like in the picture, the flat cable is still connect.