Академический Документы
Профессиональный Документы
Культура Документы
MENU
SPONSORED SEARCHES
casing drilling spring design calculations formula calculator app
This article demonstrates how to select material that will be suitable for high pressure, high pressure and
corrosive environment. The material chart is based on the Sumitomo tubular chart.
H2S:40 ppm
When tubing is freely suspended, it can be buckled by an upward force applied at the bottom of tubing. A section of tubing exposed to compression force
will have a chance of being buckled. However, a part which is under tension will not face a buckle issue.
www.drillingformulas.com/category/casing-design/ 1/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
The neutral point is the boundary below which buckling can possibly be occurred and above which buckling will
not happen.
Continue reading →
Difference in temperature causes steel to contract or expand. If tubing is free to move, length of the tubing will
be either longer or shorter due to thermal expansion. On the other hand, if the tubing is not free to move, there
will be a change in axial force due to the temperature effect.
Figure 1 illustrates an increase in length due to heat and Figure 2 demonstrates a decrease in length because of
cooling.
www.drillingformulas.com/category/casing-design/ 2/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
www.drillingformulas.com/category/casing-design/ 3/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
Continue reading →
Ballooning is a change in average pressure which causes a radial contraction or swelling. If the tubing is free to
move, the length of tubing will be either longer or shorter. If tubing cannot be moved, stress will be created in the
tubing body.
Figure 1 illustrates ballooning of tubing. This will happen when internal pressure is higher than external
pressure. Tubing will shorten if the tubing is free to move. If the tubing cannot be moved, ballooning will create a
tension force on the packer.
www.drillingformulas.com/category/casing-design/ 4/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
Figure 1 – Ballooning
Continue reading →
This article demonstrates a piston effect and how it will change the length of tubing with full detailed calculations.
www.drillingformulas.com/category/casing-design/ 5/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
Continue reading →
1 2 3 4
Categories
email address
Click Here
Search on Drillingformulas.com
Search
Custom Search
Drillingformulas.com on Facebook
www.drillingformulas.com/category/casing-design/ 6/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
Drillingformulas.…
344 K mentions J’aime
2 amis aiment ça
OilfieldPix.com
Oilfield Acronyms
Recent Comments
DrillingFormulas.Com on What are differences between Full Opening Safety Valve (TIW valve) and Inside BOP valve (Gray Valve)?
www.drillingformulas.com/category/casing-design/ 7/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
www.drillingformulas.com/category/casing-design/ 8/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
www.drillingformulas.com/category/casing-design/ 9/10
09/05/2020 Casing Design Archives - Drilling Formulas and Drilling Calculations
www.drillingformulas.com/category/casing-design/ 10/10