Академический Документы
Профессиональный Документы
Культура Документы
Page 1 of 2
Shutdown SIS
Previous Screen
i02596469
Illustration 1 g01299677
Battery disconnect switch (1) is on the left rear side of the engine compartment.
https://sissrv:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 4/22/2008
16M Motor Grader B9H00001-UP (MACHINE) POWERED BY C13 Engine(SEBP4... Page 2 of 2
The battery disconnect switch operates differently than the engine start switch. When the battery
disconnect switch is in the OFF position, the electrical system is disabled. When the engine start
switch is turned to the OFF position and the battery disconnect switch is turned to the ON position,
the battery remains connected to the entire electrical system.
Turn the battery disconnect switch to the OFF position and remove the disconnect switch key when
you service the electrical system or other components on the machine. Lock out access to the battery
disconnect switch by closing cover (2) and installing a padlock.
Turn the battery disconnect switch to the OFF position and remove the disconnect switch key after
you operate the machine. This will prevent the battery from being discharged. The following
problems can cause battery discharge:
short circuits
vandalism
NOTICE
Never move the battery disconnect switch to the OFF position while the
engine is operating. Serious damage to the electrical system could
result.
Copyright 1993 - 2008 Caterpillar Inc. Tue Apr 22 08:08:17 UTC+0900 2008
All Rights Reserved.
Private Network For SIS Licensees.
https://sissrv:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 4/22/2008