Академический Документы
Профессиональный Документы
Культура Документы
zl
SPOTLIGHT
LI
rl 8" x 9" (203 mm x 229mm) 500W/1000W
('l
]L High intensity and
o- precise beam control.
(o
An essential spotlight for theatre, television
-nill and high intensity architectural accent lighting.
-.lF o Throws of up to 70' (21m).
O(r o Heavy gauge steel body.
2)
<F
tz r Four push shutters and pattern holder of special
F[!
a() heat resisting alloys for precise beam shaping
control - or iris with 2458.
o Flatted ellipsoidal specular Alzak reflector
eng i neered for maxi mu m eff iciency.
o Wide range of lamps, axially mounted
for greater efficiency, smoother field
and higher intensity.
oa
m --l
Cat. No. Lenses zt
i>
CZ
2457 1 - 8" x 9" (203 mm x 229 mm) stepped lens :DO
with four push shutters
2458 1 - 8" x 9" (203 mm x 229 mm) stepped lens with iris.
ll-
mil
-
Accessories .-J
1112 Color or diffuser frame o)
1 336 High Hat E
1 343
1353
Pattern Holder
Set of 6 patterns
l-lo
1415 Stripped glass color f ilter (specify color) l=
1 540 15" (381 mm) Sidearm with clamp and sliding tee 12
lo
1541 24" (610 mm) Sidearm with 2 pc. clamp and sliding tee
Strand Century Lekoliteo Spotlight 2457 t2458
8" x 9" (203 mm x229 mm) 500W/1000W
Specifications
This unit shall be a 500W/ 1000W ellipsoidal ref lector spotlight with a medium pref ocus socket to
l-19"---
accommodate an axially mounted tungsten-halogen lamp, a flatted ellipsoidal specular Alzak
(483mm)
processed aluminum reflector, four push shutters and a template slot, all mounted within a
rugged steel housing. T
The single 8"x 9" (203mm x 229mm) stepped lens shall be mounted in a steel lens tube, designed 26"
to provide for sharp or soft defin ition of the beam without openi ng a slot for passage of stray light (660mm)
1r
rays or allowing extraneous internal reflections from the lens tube. This tube shall be fitted with
heavy duty color frame holders. The housing shall be of not less than 20 gauge steel.
The lamp chimney and cap shal I be of cast alu mi num and shal I permit ready removal of the bu rner
housing by means of a captive, spring loaded, winged fastener requiring no more than one-
quarter turn from lock to release.
The shutters and gate assembly shall be of special heat resisting alloys. Adequate ventilation
shall be provided in the form of openings in the body completely surrounding the reflector, the
lens tube and between the burner and reflector housing.
34" _ 38" _______1 t_12"___4
Each unit shall be supplied with a malleable iron clamp to grip up to 2" (51 mm) pipe, a strap iron
yoke with mounting holes and locking mechanism and 3'(0.9m) asbestos leads. Exteriorfinish (864 mm - 965 mm) (305 mm)
shall be baked enamel and the entire unit shall be U.L. listed and CSA approved in Canada. A Yokeadiustmentknob
Weight: 45 lbs. (20.4 kg.). B Push shutters
This un it shal I have a 7.5o beam ang le and a 1 50 field angle and shal I produce 63 footcandles at 70' C Color lrame holder
(695 Iux at 21 m) maximum using an EGJ lamp.
NOTE: To specrfy unit with iris, use 2458.
Photometrics
DISTANCE _ FEET 40 50 60 70 80
FOOTCANDLES 192 123 84 63 48
FIELD DIAI'4ETER 10.4 13', 15.6 182 20.8
BEAM ANGLE 7 50
FIELD ANGLE 1 50
STFIANtrI
s=H,J."Y-ff"
STRAND CENTURY INC. STRAND CENTURY INC. STRAND CENTURY LIMITED
20 Bushes Lane 5432 West 102nd Street 6334 Viscount Road
Elmwood Park, New Jersey 07407 Los Angeles, California 90045 Mississauga, Ontario, Canada
U.S.A. U.S.A. L4V 1 H3
Tel: (201) 791-7000 (212) 564-6910 Tel: (213) 776-4600 Tel: (416) 677-7130
Telex: 130322 Telex: 653508 Telex:06968646