Академический Документы
Профессиональный Документы
Культура Документы
www.kineticsnoise.com/industrial
Over 50 years Solving Noise Problems
of success solving Using Kinetics Noise Control
noise & vibration Products & Systems
control problems Noise is generally defined as unwanted sound. A typical
noise control problem includes three basic components: the
• Largest Selection of noise source (machines, fans, pumps, processes etc.); the
• Standard Products receiver (persons subjected to the noise); and the path (the
• Custom Engineered Products route the noise travels between the source and the receiver
and Systems indoors or outdoors).
• Engineering & Applications
Assistance Noise exists in two forms: airborne and structure-borne.
• Quality Assurance Airborne noise travels from a source to a receiver as a
• On-Time Delivery differential in atmospheric pressure and travels in all
• Competitive Pricing directions. Structure-borne noise is unwanted vibration,
which is transmitted from a vibrating source to a receiver
You’ll find the largest selection of through a solid material and regenerated as airborne noise.
standard and custom designed,
industrial noise and vibration Once the source, path and receiver have been identified,
control products in the world at four tools are used to control the unwanted noise. These
Kinetics Noise Control, Inc. tools are: absorption, barriers (blocking), damping and
vibration isolation. The Kinetics products used to control
Need something off-the-shelf? these noise types are presented in this brochure. All
Kinetics maintains a large inventory products are independently tested per applicable ASTM
of high quality standard products for standards.
fast deliveries. How about a custom-
engineered system? Kinetics’
engineers have designed
application-specific products and
systems for industrial plants and
processes since 1958.
Panel Absorber
Model KNP
Kinetics KNP absorbers are 2" or
Sound Absorber Panel
4" (51 or 102 mm) thick, heavy Model S-4
duty, perforated aluminum, Heavy-duty wall and ceiling mounted panels
galvanized steel, or stainless steel used in controlling low and mid-frequency
panels. These panels can be reverberant sound. Excellent mechanical
attached to walls, ceilings, or strength and durability, resists casual
structures around indoor or outdoor equipment. They can be damage, heat, moisture and corrosive
faced on both sides and used as hanging baffles, allowing chemicals. May be steam cleaned. Available
absorption from both sides and are available in various lengths in white or foil facings. Meets Class 1.
and widths. Powder-coated finish available. Temperature: -40°F to 450°F
(-40°C to 232°C)
Fiberglass Absorbers Thickness: 1", 2" and 4"
Model PA (25 mm, 51 mm, 102 mm)
Molded fiberglass boards.
Non-faced PA 410 GO
absorbers provide superior
broadband absorption. Faced PA 410 GB absorbers excel in
low and mid range frequencies. Meets Class 1.
Sizes: 4' x 8' x 1" (1.2 m x 2.4 m x 25 mm)
Temperature: -40°F to 450°F (-40°C to 232°C)
Isolation Pads
Models NDF and NDM
Kinetics Model NDF and NDM isolation pads are recom-
mended for noise, shock and vibration applications. The
NDF, a blend of laminated neoprene pads are capable
of being statically loaded up to 10,000 psi (703 kg/cm2)
and dynamically loaded up to 2000 psi (141 kg/cm2). The
NDM pads, a blend of ozone-resistant rubber elastomer,
are capable of being statically loaded up to 2000 psi
(141 kg/cm2) and dynamically loaded up to 1000 psi
Isolation Mounts | Models RD and RQ (70 kg/cm2). Typically used with high load equipment.
One-piece, molded neoprene, with non-skid, ribbed top
and bottom surfaces. Mounts include a tapped steel load
plate, pre-drilled base plate and options for leveling bolt. Fiberglass Isolators | Model AC
Complete with load plate and mounting brackets are
Capacities: 55 to 4,000 pounds (25 to 1814 kg) designed for bolt-down applications such as vent fans,
vane axial fans, high-speed motors, and similar
equipment. AC fiberglass isolators are available in sizes
with capacities from 40 to 900 lbs. (18 to 409 kg) and
deflections of 0.18" to 0.70" (5 to 18 mm).
Machinery Pads | Models NP & NG Equipment Bases | Models CIB and SFB
High quality, neoprene pads available in 18" x 18" Custom designed, welded structural steel bases
(457 x 457 mm) sheets in thickness from 0.22" to 8.87" designed to provide rigid support and correct inertia
(6 to 225 mm) for field sizing and cutting, 45 and 65 Duro. mass providing stability and vibration isolation.
kineticsnoise.com/industrial
industrialsales@kineticsnoise.com
1-800-959-1229
Kinetics Noise Control, Inc. is continually upgrading the quality of our products. IPB 6/13
We reserve the right to make changes to these and all products without notice.