Академический Документы
Профессиональный Документы
Культура Документы
UN
Complementary material 5222-02
HOLD DOWN GRID Part 3
Page 1 of 2
Endausstattung; Abdeckrost Supersedes 97-02
1 Scope
This Uhde standard applies to the engineering and construction of industrial and chemical plants. It contains
requirements for the design of wire mesh packing for vessels.
2 Units / abbreviations
2.1 Units
The following units will be used:
Table 1. Units
General SI units
Dimensions mm
Temperature °C
Figure 1.
Free cross section of wire mesh packing (acc. to DIN ISO 4783-1):
• for 0.5 mm wire diameter = 69 %
• for 0.63 mm wire diameter = 64 %
4 Materials
Wire mesh packing: Corrosion-resistant steel (e.g. 1.4301)
Support grid and connecting elements: see vessel specification or drawing
Reference Standards
DIN ISO standards:
DIN ISO 4783-1 : 1996-10 Industrial wire screens and woven wire cloth; Guide to the choice of aperture
size and wire diameter combinations; Generalities
Amendments
The following amendments have been made to the February 1997 edition:
– Standard completely reviewed.