Академический Документы
Профессиональный Документы
Культура Документы
Issue 04
Date 2014-09-10
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Contents
1 Introduction.................................................................................1
1.1 Appearance.........................................................................................................................................................1
1.2 Physical Ports.....................................................................................................................................................2
2 Technical Specifications.................................................................4
2.1 Frequency Band.................................................................................................................................................4
2.2 Capacity.............................................................................................................................................................4
2.3 Receiver Sensitivity...........................................................................................................................................5
2.4 Typical Output Power........................................................................................................................................5
2.5 Power Consumption...........................................................................................................................................7
2.6 Input Power........................................................................................................................................................8
2.7 Equipment Specifications..................................................................................................................................8
2.8 CPRI Port Specifications...................................................................................................................................8
2.9 Environment Specifications...............................................................................................................................9
1 Introduction
The RRU3939 is an outdoor remote radio unit. It is the RF part of a distributed base station,
powered by a power cabinet, and can be located near the antenna. The RRU3939 performs
modulation, demodulation, data processing, and combination and division of baseband signals
and RF signals. With the Software Defined Radio (SDR) technology, the RRU3939 can
support the GL dual-mode operation through corresponding software configuration.
The RRU3939 has a dual-transmitter and dual-receiver (2T2R) design, which further
improves the output power and the carrier capacity.
The software of the RRU3939 is backward compatible with the MBTS, MBSC, and OSS of
the N-1 and N-2 versions, where N indicates the current version number, for example,
SRAN8.0 in this document. In addition, the software package of the three versions includes
the RRU3939 software components. Therefore, the RRU3939 of SRAN8.0 can be used for
SRAN6.0, SRAN7.0, and SRAN8.0, without affecting KPIs.
1.1 Appearance
Figure 1.1 shows the appearance of the RRU3939.
2 Technical Specifications
2.2 Capacity
Figure 1.1 Single-mode capacity
Mode Capacity
The receiver sensitivity of GSM, as recommended in 3GPP TS 51.021, is measured at the antenna
connector on condition that the channel rate reaches 13 kbit/s and the Bit Error Rate (BER) is not
higher than 2%.
The receiver sensitivity of LTE, as recommended in 3GPP TS 36.104, is measured under a 5 MHz
channel bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Figure 1.1 and Figure 1.2 list the typical output power of the RRU3939.
Figure 1.1 Typical output power of the RRU3939 (1800 MHz, single-mode)
Number Number Output Output Power Output
of GSM of LTE Power per GSM Power per
Carriers Carriers per GSM Carrier With LTE
Carrier Dynamic Carrier
(W) Power Sharing (W)
(W)
1 0 60 60 0
2 0 60 60 0
3 0 30 30 0
4 0 30 30 0
5 0 20 25 0
6 0 20 25 0
7 0 15 20 0
8 0 15 20 0
0 1 (MIMO) 0 0 5/10/15/20
MHz: 2x60
1.4/3 MHz:
2x40
0 2 (MIMO) 0 0 2x30
0 2 (MIMO) 0 0 Carrier 1:
2x20
Carrier 2:
2x40
Figure 1.2 Typical output power of the RRU3939 (1800 MHz, GL MSR)
Number of Number of Output Power Output Power per
GSM LTE per GSM Carrier LTE Carrier (W)
Carriers Carriers (W)
1 1 (MIMO) 40 2x20
1 1 (MIMO) 30 2x30
1 1 (MIMO) 20 2x40
2 1 (MIMO) 40 2x20
2 1 (MIMO) 30 2x30
2 1 (MIMO) 20 2x40
3 1 (MIMO) 20 2x20
3* 1 (MIMO) * 15* 2x30*
4 1 (MIMO) 20 2x20
4* 1 (MIMO)* 15* 2x30*
5 1 (MIMO) 12 2x20
5* 1 (MIMO) * 7.5* 2x30*
6 1 (MIMO) 12 2x20
6* 1 (MIMO) * 7.5* 2x30*
Figure 1.1 Power consumption of the DBS3900(Ver.D)(-48V) (configured with RRU3939, 1800
MHz)
Mode Configuration Output Typical Maximu
Power Power m Power
per Consum Consum
Carrier ption ption
(W) (W) (W)
Quantity of CPRI 2
ports
CPRI port rate 1.25 Gbit/s, 2.5 Gbit/s, or 4.9 Gbit/s
Topology Star, chain, or dual-star
Cascading Levels CPRI MUX: GL: 4
Maximum Distance The maximum distances of the RRUs from the BBU vary with the
from the BBU types of BBP in LTE mode as follows:
LBBPd1/UBBPd3: 20 km
LBBPd2/UBBPd4: 40 km
LBBPd3/UBBPd5/UBBPd6:
− Number of LTE cells ≤ 3: 40 km
− Number of LTE cells > 3: 20 km
According to the installation scenario, traffic load, and carrier configuration, the output power of
RRU3939 may temporarily decrease when they work in the highest 10℃ temperature range.
Relative 5% RH to 100% RH
humidity
Absolute 1 g/m3 to 30 g/m3
humidity
Atmospheric 70 kPa to 106 kPa
pressure
Operating The RRU complies with the following standards:
environment 3GPP TS 45.005
3GPP TS 36.141
3GPP TS 37.141
ETSI EN 300019-1-4 V2.1.2 (2003-04) Class 4.1: "Non-weather
protected locations."
Shockproof NEBS GR63 zone4
protection
Ingress IP65
Protection (IP)
rating