0 оценок0% нашли этот документ полезным (0 голосов)
88 просмотров1 страница
This document appears to be an exam paper for an Embedded Systems course. It contains two parts - Part A with 10 short answer questions worth 2 marks each, and Part B with 5 long answer questions worth 10 marks each. Candidates must answer all questions in Part A and 5 questions from Part B, choosing one full question from each of the 5 units. The questions cover various topics related to embedded systems including microprocessors, interrupts, I/O interfaces, real-time systems, microcontrollers, memory organization, and communication buses.
This document appears to be an exam paper for an Embedded Systems course. It contains two parts - Part A with 10 short answer questions worth 2 marks each, and Part B with 5 long answer questions worth 10 marks each. Candidates must answer all questions in Part A and 5 questions from Part B, choosing one full question from each of the 5 units. The questions cover various topics related to embedded systems including microprocessors, interrupts, I/O interfaces, real-time systems, microcontrollers, memory organization, and communication buses.
This document appears to be an exam paper for an Embedded Systems course. It contains two parts - Part A with 10 short answer questions worth 2 marks each, and Part B with 5 long answer questions worth 10 marks each. Candidates must answer all questions in Part A and 5 questions from Part B, choosing one full question from each of the 5 units. The questions cover various topics related to embedded systems including microprocessors, interrupts, I/O interfaces, real-time systems, microcontrollers, memory organization, and communication buses.
B VR AJ U I NS T I TU TE O F T EC HNO LOG Y, NAR S AP
UR (UGC - AUTONOMOUS) B.Tech IV Year I Semester Regular/Supplementary Examinations, Nov/Dec 2019 EMBEDDED SYSTEMS (OPEN ELECTIVE) Time: 3 Hours Max Marks: 70 Note: This Question Paper contains two Parts A and B Part A is compulsory which carries 20 marks. Answer all questions in Part A at one place only. Part B Consists of 10 questions. Answer any five (one full question from each unit). Each question carries10 marks and may have a, b, c as sub questions. PART – A (10x2 = 20 Marks) 1. a) State any two factors to make microprocessor based design was fast. BL2 CO1 b) Define the terms recurring and NRE cost. BL1 CO1 c) Draw the diagram to interface the port devices with the system buses. BL1 CO1 d) Define interrupt latency. BL1 CO1 e) Give the details about TMOD register. BL1 CO3 f) What are the unconditional jump instructions in 8051? BL1 CO3 g) Define Task and Task states. BL1 CO2 h) What is priority-inversion problem? BL1 CO2 i) Compare the RISC versus CISC processors. BL2 CO3 j) Give the importance of SPI bus. BL1 CO3 PART – B (5x10 = 50 Marks) 2. (a) Explain the differences between general purpose computer system to embedded systems with example. BL2 CO1 (b) What are the challenges while meeting low power consumption, performance, low-cost requirement for embedded system? Explain how they are affect other. BL2 CO1 OR 3. With the help of example, explain the formalisms in embedded system design. BL4 CO1 *** 4. (a) Explain the role wireless devices in embedded systems. BL2 CO4 (b) Explain principle operation of real time clock. BL2 CO4 OR 5. (a)How do the device drivers function and ISR differ? BL2 CO3 (b) Discuss the context switching mechanism process in ARM7. BL2 CO3 *** 6. (a) What are the different factors to be considered in selecting a microcontroller for any application? BL1 CO3 (b) Write a program for 8051 to find the sum of first 5 natural numbers and stored the result at 6500H. BL3 CO3 OR 7. (a) Describe the I/O port structure of 8051. BL2 CO3 (b) Discuss interrupt structure of 8051 and also give the details about IE register. BL2 CO3 *** 8. Explain the need for inter process communication and its associated functions. BL2 CO2 OR 9. (a) Explain the techniques to load the embedded software into the target system. BL2 CO2 (b) Write a brief notes on hard real time scheduling algorithm. BL2 CO2 *** 10. (a) With the architectural aspects, give the differences between ARM and SHARC processors. BL4 CO5 (b) Give the design structure of memory organization of ARM processor. BL2 CO5 OR 11. Discuss about I2C bus along with topology and frame formats .How does CAN differ from I2C. BL2 CO3 ***