Академический Документы
Профессиональный Документы
Культура Документы
2. Remove 2 pallet uprights and the straw seat from the pallet
located before seal bar #1.
*Tech’s tip: Original screws are too short; use the longer ones that
are kept in the box with alignment tools.
Reference Only-Master is Electronic 5
4.7W013 Rev. B
Alignment of Seal Bars Wk. Instr.
4. Move pallet forward into position of the
specific head by manually rotating the fly
wheel.
This is incorrect!!! Seal bars
This is correct!!!
need to be aligned (too low).
18mm
The bottom of the seal bars should be 18mm from the top of the
pallet.
Reference Only-Master is Electronic 6
4.7W013 Rev. B
Alignment of Seal Bars Wk. Instr.
Aligning Heads Vertically:
Jacking screw