Академический Документы
Профессиональный Документы
Культура Документы
Página 1 de 4
Shutdown SIS
Previous Screen
i02754886
S/N - 1AL408-UP
S/N - 2AN104-UP
S/N - 2FM400-UP
S/N - 2GS360-UP
S/N - 2HS380-UP
S/N - 2WR642-UP
S/N - 2ZK2392-UP
S/N - 3AS450-UP
S/N - 3GM80-UP
S/N - 3YK267-UP
S/N - 4ER500-UP
S/N - 4MK404-UP
S/N - 4XM1396-UP
S/N - 5AK156-UP
S/N - 5FM800-UP
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/05/2020
12H Motor Grader 4XM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP... Página 2 de 4
S/N - 5HM1150-UP
S/N - 6TM366-UP
S/N - 6YN1-UP
S/N - 7MM249-UP
S/N - 8JM280-UP
S/N - 8MN500-UP
S/N - 8WN350-UP
S/N - 9EJ510-UP
S/N - 9JM350-UP
S/N - 9TN400-UP
S/N - 9YR330-UP
S/N - 9ZN205-UP
S/N - BDJ1-UP
S/N - XZH1-UP
S/N - XZJ1-UP
S/N - XZK1-UP
When testing and adjusting the transmission and power train, move the
machine to an area clear of obstructions, with safe exhaust ventilation
for the exhausts. Sudden movement of the machine or release of oil
under pressure can cause injury to persons on or near the machine. To
prevent possible injury, do the procedure that follows before testing and
adjusting the transmission and power train.
NOTICE
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/05/2020
12H Motor Grader 4XM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP... Página 3 de 4
Before you begin the test, refer to Systems Operation, Testing and Adjusting, "Machine Preparation
for Troubleshooting".
Table 1
Required Tools
Part Number Description Qty
1U-5481 Pressure Gauge Group 1
1U-5482 Pressure Adapter Group 1
8T-0856 Pressure Gauge (0 to 6,000 kPa (0 to 870 psi)) 1
1. Operate the machine until the transmission oil is at an operating temperature of 51 °C (124 °F).
2. Stop the machine. Engage the parking brake and turn off the engine.
Illustration 1 g00109926
Left Rear of the Machine
(1) Test port
(2) Transmission pump
3. Attach 8T-0856 Pressure Gauge (0 to 6,000 kPa (0 to 870 psi)) to pressure tap (1) on
transmission pump (2).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/05/2020
12H Motor Grader 4XM00001-UP (MACHINE) POWERED BY 3306B Engine(SEBP... Página 4 de 4
4. Start the engine. Set the throttle control to high idle. Turn the differential lock to the ON
position . Refer to Table 2 for the correct transmission oil pressure. Record the gauge reading in
Table 3.
Table 2
Transmission Oil Pressure (minimum)
NEUTRAL position at low idle NEUTRAL position at high idle
2690 kPa (390 psi) 3240 kPa (470 psi)
Table 3
Transmission Oil Pressure
NEUTRAL position at low idle NEUTRAL position at high idle
5. Operate the engine at low idle and repeat Step 1 through Step 4.
Copyright 1993 - 2020 Caterpillar Inc. Tue May 12 12:45:30 EST 2020
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 12/05/2020