Академический Документы
Профессиональный Документы
Культура Документы
(Mechanical
Engineering) Students
Projects Floated by Dr. Nimai Pada Mandal
Objective: To design a Gerotor Oil Pump by miximizing the flow rate and minimize
the flow ripple.
Brief Activities of Project: This research oriented project covers the following
activities:
1. Understanding the concepts and design principle of Gerotor Oil Pump
2. Propose a new profile of lobes of pump rotors for improve the efficience of
the pump
3. Simulate and analysis the modified system of the pump by Matlab and CFD
4. Validate the results with existing experimental results
Expected Outcome: Optimal Design of a Gerotor Oil Pump for lubricating system
-----------------------------------------------------------------------------------------------------
Projects Floated by Dr. Asim Gopal Barman
Project 1:
Note: Dr. Baidya Nath Saha, CIMAT, Mexico will act as Co-supervisor for
this project.
(Collaboration already approved by
competent authority.)
Project 2:
Project 3:
(2)
Title: Topological design and optimization in additive manufacturing of biomedical
implants
Prerequisites:CAD, Optimization methods and MATLAB Programming
Outline: The objective of this project is to analyze the design and optimization of
gradual build-up of structures in additive manufacturing of biomedical implants with
the help of CAD model and optimization methods.
Possible Outcome: Results obtainedmayguide in decomposition of successive layers
in additive manufacturing of different complex shaped parts for biomedical
applications.
(3)
Title: Analysis ofultrafastlaser processing in micro/nano-fabrications for
MEMS/NEMS
Prerequisites:Heat transfer, fluid mechanics, numerical methods/ANSYS and
MATLAB Programming
Outline: The objective of this project is to analyze the laser materials interactions in
ultrafast laser processing for selection of process parameters and better control in
fabrications of MEMS/NEMS devices using the theory of micro-scale transport
phenomena (heat transfer and fluid flow).
Possible Outcome: Results obtainedmay help in selection of process parameters for
better process control.
Projects Floated by Mr. M.N Pandey
Hydraulic ram pump
EQUIPMENT USED
DELIVERY VALVE
SUPPLY PIPE
AIR CHAMBER
WASTE VALVE
WATER TANK
FLOW CHART
--------------------------------------------------------------------------------
Projects Floated by Dr. Sankar Kumar Roy
Major project for B.Tech
1. Project: Planetary gearbox modeling to evaluate the influence of tooth crack
on dynamic respose. (Project is selected by one group)
Present study will be performed by considering all gears are spur gear. Modeling will
be purely analytical. No Finite Element Technique will be used as the technique has
its own limitations.
Possible Outcome:
1. Study the dynamic response of the planetary gear by considering tooth root crack in
sun gear.
2. Study the dynamic response of the planetary gear by considering tooth root crack
in planet gear.
Prerequisite:
Basics of Mechanical Vibration, MatLAB software & Mathematica
Prerequisite:
Basics of Mechanical Vibration, MatLAB software & Mathematica
Project Title: Design and Fabrication of Regenerative Power System for Tricycle
Objective and outcome of the project: The aim of this project is to design and
fabricate a power production and supply system for tricycle. This system will produce
power when the road is smooth or inclined and supply power when it will move
through climbing road.
-------------------------------------------------------------------------------------------------------
Title: Design and Optimization of Connecting Rod for 4 – Stroke Petrol Engine
Flow Chart:
Major
Project
Design Optimization
Theory
Conclusions
Expected outcome: The behaviour of flow field, flow patterns, variation of axial
skin friction coefficient, wall pressure, variation of local Nusselt number, temperature
distribution, etc. will
BTP 2: Study of interaction of laminar offset jet with coflowing wall jet
--------------------------------------------------------------------------------------------