Академический Документы
Профессиональный Документы
Культура Документы
28B SERIES
SEPARATE SALE
PLATE FIN WATER COILS
Features:
• Plate fin design with 1/2-in. or 5/8-in.
diameter copper tubes
• Chilled or hot water coils in lengths
from 24 in. to 144 in. (in one-inch
increments)
• Chilled and hot water coils available in
heights from 15 in. to 55 in. (in
2-1/2-inch increments)
• Hot water booster coil lengths range
from 12 in. to 43 in. with heights from
5 in. to 15 in.
• Each coil is computer selected to
meet your specific job requirements
P914
using a computer program approved
by ARI Standard 410
• All 28B coils are available in fin
spacings of 8, 11, or 14 fins per in.
• Cooling coils are available in 2, 4, 6,
or 8 rows. Heating coils are available
in 1, 2, or 4 rows.
Carrier’s 28B Series water coils offer a wide range of sizes and are
manufactured in accordance with ARI Standard 410. Top quality
chilled water cooling coils and hot water heating coils are offered
with options that provide a custom fit for your applications.
1034
COILS
MODEL NUMBER NOMENCLATURE - 28BC
28B C A 4 32 F A A 060 A R
COATING
A = No Coating
B = Epoxy (E-coat) Coating DBTS (DISTANCE BETWEEN
TUBE SHEETS)
In inches from 24 to 144 in 1 inch
increments.
For Example,
024 = 24 inches
121 = 121 inches
ROWS
4-4
6-6
8-8
0 - 10
TUBE WALL, HAIRPIN
(1/2″ OD COPPER TUBE)
A = 0.016 in., STD. HAIRPIN
TUBES IN FACE B = 0.025 in., HEAVY WALL
12-44 Tubes in 2-Tube Increments
* Quarter circuit available for 4 row coils with TIF = 12, 16, 20, 24,
28, 32, 36, 40, 44 only. Half, full or double circuit available with
any 4, 6, or 8 row.
1035
COILS
MODEL NUMBER NOMENCLATURE - 28BH
28B H A 2 24 F A A 120 A R
COATING
A = No Coating
B = Epoxy (E-coat) Coating
DBTS (DISTANCE BETWEEN
TUBE SHEETS)
In inches from 24 to 144 in 1 inch
increments.
For Example,
024 = 24 inches
121 = 121 inches
ROWS
1, 2, 4
TUBE WALL, HAIRPIN
(1/2″ OD COPPER TUBE)
A = 0.016 in., STD. HAIRPIN
TUBES IN FACE B = 0.025 in., HEAVY WALL
12-44 Tubes in 2-Tube Increments
* Half circuit available for 1-row or 2-row coils; full circuit available
for 2-row only.
1036
COILS
MODEL NUMBER NOMENCLATURE - 28BB
28B B A 2 12 T A A 024 1 R
COIL MODEL
B = Booster
NOZZLE STYLE
1 = 1/2″ OD Copper Std.
2 = MPT Fitting
CASING/COATING
A = Flanged/No Coating
B = Flanged/Epoxy (E-coat) DBTS (DISTANCE BETWEEN
C = Drive Clip/No Coating TUBE SHEETS)
D = Drive Clip/Epoxy (E-coat) In inches from 12 to 42 in 3-inch incre-
ments (up to 30 inches); and from 30 to 42
in 6-inch increments.
For Example,
012 = 12 inches
036 = 36 inches
ROWS
1, 2
TUBE WALL, HAIRPIN TYPE
(1/2″ OD COPPER TUBE)
A = 0.016 in., STD. HAIRPIN
TUBES IN FACE B = 0.025 in., STD. HAIRPIN
4-18 Tubes in 2-Tube Increments
NOTE: Example shown is for a 2-row booster coil with flanged cas-
ing; 12 tubes in face, 2 circuits, with 8 aluminum fins per in. and gal-
vanized casings; and 1/2-in. OD copper tubes with 0.016-in. wall
thickness. The coil is 24 in. long between tube sheets, with
right-hand 1/2 in. OD copper stubout for field-supplied sweat
connection.
1037
COILS
MODEL NUMBER NOMENCLATURE - 28BD
28B D A 4 32 F A B 060 A R
COATING
A = No Coating
B = Epoxy (E-coat) Coating
1038
COILS
MODEL NUMBER NOMENCLATURE - 28BF
28B F A 2 24 F A B 120 A R
COATING
A = No Coating
B = Epoxy (E-coat) Coating
DBTS (DISTANCE BETWEEN
TUBE SHEETS)
In inches from 24 to 144 in 1 inch
increments.
For Example,
024 = 24 inches
121 = 121 inches
ROWS
1, 2
* Half circuit available for 1-row or 2-row coils; full circuit available
for 2-row only.
1039
COILS
MODEL NUMBER NOMENCLATURE - 28BZ
28B Z A 1 04 F A A 120 A V
ORIENTATION**
28B - NU-FIN SEPARATE V = Vertical
SALE COIL H = Horizontal
COIL MODEL
Z= STEAM Coils -1” NOZZLE AND HEADER
STYLE†
A = MPT - Steel Optional
B = MPT - Non Ferrous - STD
COATING
A = No Coating DBTS (DISTANCE BETWEEN
B = Epoxy (E-coat) Coating TUBE SHEETS)
In inches from 24 to 144 in 1 inch incre-
ments.
For Example,
024 = 24 inches
121 = 121 inches
ROWS
1
1040
COILS
MODEL NUMBER NOMENCLATURE - 28BX
28B X A 4 32 F A A 060 A R
COIL MODEL
X= Direct Expansion Coil - 1/2 in.
NOZZLE AND SIZE
See Chart below.
COATING
A = No Coating
B = Epoxy (E-coat) Coating
DBTS (DISTANCE BETWEEN
TUBE SHEETS)
In inches from 24 to 144 in 1 inch incre-
ments.
For Example,
024 = 24 inches
121 = 121 inches
ROWS
4-4
6-6
8-8
TUBE WALL, HAIRPIN
(1/2″ OD COPPER TUBE)
A = 0.016 in., STD HAIRPIN
TUBES IN FACE B = 0.025 in., HEAVY WALL
12-44 Tubes in 2-Tube Increments
* Quarter circuit available for 4 row coils with TIF = 12,16, 20, 24,
28, 32, 36, 40 only. Half, full or double circuit available with 4, 6, or
8 row.
**All Direct-Expansion coils are right-hand and rotated 180 degrees
for left-hand applications.
NOTE: Example shown is for a 4-row evaporator coil, not coated;
32 tubes in face; a full circuit; with 8 aluminum fins per inch and gal-
vanized casing; and 1/2-in. O.D. copper tubes with 0.016-in. wall
thickness. The coil is 60 in. long between tube sheets and has Nu Fin Coils B&W
right-hand connections.
1041
COILS
FACTORY AUTHORIZED REPLACEMENT COILS
pg359
• Refrigerant Coils
• Steam Coils
• Chilled Water Coils
• Hot Water Coils
TUBES, FINS & HEADERS ARE MADE FROM THE FINEST MATERIALS
• Copper (Tubes, Fins and Headers) • 1/2″ O.D Tubes
• Aluminum (Fins) • 5/8″ O.D. Tubes
• Steel (Headers, Casings) • 3/8″ O.D. Tubes
QUALITY CONSTRUCTION
• Slab or Formed
FEATURES:
CARRIER CORPORATION QUALITY
• Our coils are made of quality materials and they are manufactured with rigid quality guidelines
• Every coil we produce is PRESSURE TREATED AT 400 PSI with air under water
• We offer corrosion resistant coatings to protect your coil from harmful environments
• ISO 9002 certified supplier
1042
COILS
FACTORY AUTHORIZED REPLACEMENT COILS FOR 39E AIR HANDLERS
28C COIL SECTION (PLATE FIN)
INQUIRIES CONCERNING COILS MUST BE ACCOMPANIED BY THE COMPLETE PART NUMBER FOUND ON COIL NAMEPLATE
COIL
NO.
POSITION 1, 2, 3 4 5 6 7, 8 9 10 11 12, 13, 14 15 16
LENGTH
FIN TUBE BETWEEN DISTRIBUTOR
COIL COIL HEADER TUBES MATERIAL MATERIAL TUBE NOZZLE
TYPE MODEL TYPE MATERIAL ROWS IN FACE CIRCUITING & SPACING & SIZE SHEETS ORIFICE
A=Half-No Split
B=Half-12, 12 Split 056
C=HALF-12, 16 Split 066
D-FULL-10, 10 Split 071
16, 20,
HEAT 1=Standard E=-12, 12 Split 084
Q 6 24, 28, FIXED
PUMP F=-14, 14Split 102
32, 26
H=-9, 10, 9 Split 126
M=10, 12, 10 Split 144
T=10, 16, 10 Split
Copper
Q=14, 8, 14 Split
1=1/2 O.D.
x .017 Wall
12,
1
HOT 1= Steel 16, 20, M=Half
U 2 4=1/2 O.D.
WATER 2= Brass 24, 28, T=Full
4 x .025 Wall
32, 36
16, 20,
HEAT 4 A=50/50 Face Split
V 1= Copper 24, 28,
RECLAIM 6 B=Headerless
32, 36 NONE
8 B=AL 14/In
K=CU 8/In 049
B=#3/4
C=#1
COIL
L=CU 14/In 056
C 066
071
D=#1
E=#2
F=#2-1/2
S - FOR
SPECIAL
076
G=#3
084
H=#4 COIL
Copper 094
A=Face Split Quarter J=#5
102
B=Face Split Half K=#6
1=1/2 O.D. 112
4 16, 20, C=Full Split Full L=#8
DIRECT x .017 Wall 126
X 6 24, 28, D=Double M=#10
EXPANSION 136
8 32, 36 E=Row Split Quarter N=#12
144
1= Steel F=Row Split Full P=#15
4=1/2 O.D.
H=Row Split Half Q=#17
x .025 Wall
R=#20
S=#25
T=#30
U=#35
V=#40
W=#50
X=#3
Copper
05, 08,
STEAM
Z* 1 10, 13, Z=Full NONE
3=1” O.D.
16, 20
x .030 Wall
*Spiral Fin.
POSITION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SAMPLE COIL NO. 2 8 C X 1 4 1 6 E A 1 0 5 6 H -
The sample coil number is a Direct Expansion Plate Fin Coil with Standard Steel Headers, 4 Rows, 16 Tube Face, Quarter
Circuit, 8 Aluminum Fins per inch, 1/2 O.D. x .017 Copper Tubes, with 56 inches between Tube Sheets and Distributor
Nozzle Orifice Size #4.
1043
COILS
FACTORY AUTHORIZED REPLACEMENT COILS FOR 39N AND 39T AIR
HANDLERS 28N COIL SECTION
INQUIRIES CONCERNING COILS MUST BE ACCOMPANIED BY THE COMPLETE PART NUMBER FOUND ON COIL NAMEPLATE
COIL
NO.
POSITION 1, 2, 3 4 5 6 7, 8 9 10 11 12, 13, 14 15 16
FIN MATERIAL LENGTH
FIN SPACING TUBE BETWEEN
COIL COIL COIL TUBES CASING MATERIAL TUBE HEADER
TYPE MODEL TYPE POSITION ROWS IN FACE CIRCUITING MATERIAL & SIZE SHEETS (cm) STYLE HAND
1 10-44 Copper
H 2 Increments 1/2” O.D.
4 of 2 A=.017 Wall
B=.025 Wall
4
HOT 6 H=Half
WATER D F=Full
Copper
F
5/8” O.D.
14-36
1 B=.020 Wall
F Increments
2 C=.035 Wall A=MPT Steel
of 2
E=.020 Cleanable B=MPT Non-Ferrous
F=.035 Cleanable C=Victaulic Steel
D=MPT Steel Painted
E=Victaulic Steel Painted
4 Copper
6 1/2” O.D.
C
8 A=.017 Wall
0 (10) B=.025 Wall
12-44 H=Half
CHILLED 4
Increments F=Full
WATER D
of 2 D=Double A=AL 8 Galv.
Copper
B=AL 11 Galv.
4 5/8” O.D. 095
D C=AL 14 Galv.
6 B=.020 Wall 105
D=AL 8 S.S.
C=.035 Wall 109
E=AL 11 S.S.
119
F=AL 14 S.S.
120
2 G=CU 8 S.S. E=.020 Cleanable
H=CU 11 S.S. F=.035 Cleanable
J=CU 14 S.S.
135
139
Nozzle Size
155 B=3/4
8 159
169
C=1
D=1-1/2
R=Right
L=Left
N 179
199
207
E=2
F=2-1/2
G=3
A=Face Split Quarter 227 H=4
B=Face Split Half 257 J=5
4 12-44 C=Full Split Full 287 K=6
DIRECT 4
X 6 Increments D=Double 327 L=8
EXPANSION D Copper
8 of 2 E=Row Split Quarter M=10
1/2” O.D. Tube
F=Row Split Half N=12
A=.017 Wall
G=Row Split Full P=15
B=.025 Wall
Q=17
R=20
S=25
T=30
U=35
V=40
W=50
X=3
A=AL 8 Galv.
B=AL 9 Galv.
4 C=AL 12 Galv.
6 D=AL 6 S.S. Copper
A=MPT Steel
STEAM Z 1 04-17 F=Full E=AL 9 S.S. 1” O.D. Outer Tube
D B=MPT Non-Ferrous
F=AL 12 S.S. 5/8” O.D. Inner Tube
F G=CU 6 S.S.
H=CU 9 S.S.
J=CU 12 S.S.
POSITION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SAMPLE COIL NO. 2 8 N H 2 2 2 4 F A A 2 5 7 A R
The sample coil number is a Hot Water Coil, Vertical, Uncoated, 2 Row, 24 Tubes In Face, Full Circuit, 8 Aluminum Fins per inch, Galvanized Casings, 1/2”
x .017 Wall Standard Hairpin, 257 cm between Tube Sheets, Standard Steel Headers, Right Hand.
1044
COILS
FIN COMBS
The convenient way to straighten and clean condenser and evaporator fins. Fin-Tool features
a nylon master handle and 6 nylon injector type heads. Each head slides into the master handle
and tightens in place. The heads are designed to fit units with fin spacing of 4 through 25 fins per
inch. Each head is engraved with its own size and is color coded for fast identification
Eliminates knuckle scraping. The heads are angled so that when inserted in the handle, the
hand is a safe distance from the sharp fins. Fin-tool heads may also be reversed in the handle,
so that combing with an upward stroke (recommended method) my be done easily, with proper
leverage.
Convenient top-hold-handle. The master handle is comfortable to hold, and rugged so it’s long
P911 lasting.
1045