Академический Документы
Профессиональный Документы
Культура Документы
Hoses and
Fittings
Medium Pressure Hose and Fittings
– the perfect range for the more
demanding market requirements
The medium pressure hose range contains
the new Elite No-Skive compact hydraulic
hoses exceeding ISO and EN specifications,
and the classical No-Skive hydraulic hoses
according to ISO, EN and SAE specifications.
This hose range is complemented by a full
selection of compatible No-Skive fittings in
steel and stainless steel.
Selected hoses feature nitrile inner tubes High ozone-resistant cover compounds
suitable for mineral and extending weathering / aging resistance
bio-degradable oils
Parkalign®
Parker’s exclusive
Parkalign® positions
the fitting in the dies
perfectly every time.
Parker’s colour-coded
die sets
No loose parts to mismatch
or misplace – die set
segments linked together.
Die sets provide 360° evenly
The perfect applied crimping forces for
match an ideal crimp result.
The complete
system from
one source. No-Skive hose,
No-Skive fitting and crimping
machine with world-wide
guarantee and availability.
Catalogue 4400/UK
Medium Pressure Index
Index
Catalogue 4400/UK
Medium Pressure Hose
301SN
Main Features
• No-Skive thin cover hose construction
• Nitrile (NBR) inner tube
– extended fluid compatibility
• Suitable with 48 series fittings
• Type approved with DNV, GL, LR, RINA
Recommended Fluids
Petroleum and water-glycol based fluids, lubricating
Primary Applications/Restrictions oils, air and water. For air above 1,7 MPa, the hose
General medium pressure hydraulic applications cover must be pin-pricked.
Applicable Specifications Consult the chemical compatibility section on
EN 853 2SN – ISO 1436 Type 2 – SAE 100 R2 AT page Ab-16 for more detailed information.
Hose Construction Temperature Range -40 °C up to +100 °C
Tube: Nitrile (NBR) Exception: Air........................................max. +70 °C
Reinforcement: Two high tensile steel wire braids Water ...................................max. +85 °C
Cover: Synthetic rubber Fittings Series 48
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• EPDM hose resistant to phospate ester fluids
• SAE 100R2 pressure rating
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
*Parker 43 series fittings are compatible with this hose in all sizes and are available only on request
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover Compact hose
• Constant pressure hose 10,0 MPa
Recommended Fluids
Petroleum and water-glycol based fluids, lubricating
oils, air and water. For air above 1,7 MPa, the hose
cover must be pin-pricked.
Consult the chemical compatibility section on
page Ab-16 for more detailed information.
Primary Applications/Restrictions
Mobile hydraulic: Pilot lines Temperature Range -40 °C up to +100 °C
Hose Construction Exception: Air................................max. +70 °C
Water...........................max. +85 °C
Tube: Nitrile (NBR)
Reinforcement: One high tensile steel wire braid Fittings Series
Cover: Synthetic rubber Available as complete hose assemblies*
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
* Compatible with Parker 2 piece fittings for use with adjustable crimpers only (47 series nipple and 10049 series shell) – see catalogue 4481
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• Nitrile (NBR) inner tube
– extended fluid compatibility
• Type approved with DNV, GL, LR, RINA
Recommended Fluids
Petroleum and water-glycol based fluids, lubricating
Primary Applications/Restrictions oils, air and water. For air above 1,7 MPa, the hose
General medium pressure hydraulic applications cover must be pin-pricked.
Applicable Specifications Consult the chemical compatibility section on
page Ab-16 for more detailed information.
EN 853 1SN – ISO 1436 Type 1 – SAE100R1AT
Hose Construction Temperature Range -40 °C up to +100 °C
Tube: Nitrile (NBR) Exception: Air................................max. +70 °C
Reinforcement: One high tensile steel wire braid Water...........................max. +85 °C
Cover: Synthetic rubber Fittings Series 48
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• Metal and glass hot spots resistance
Recommended Fluids
Petroleum and water-glycol based fluids, lubricating
Primary Applications/Restrictions oils, air and water.
Machine tool and glas industry Consult the chemical compatibility section on
page Ab-16 for more detailed information.
Applicable Specifications
SAE 100 R1AT Temperature Range -40 °C up to +125 °C
Hose Construction Exception: Air........................................max. +70 °C
Water ...................................max. +85 °C
Tube: Synthetic rubber
Reinforcement: One high tensile steel wire braid Fittings Series
Cover: Galvanized steel wire Available as complete hose assemblies*
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
*Parker 43 series fittings are compatible with this hose and are available only on request
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• SAE 100R1 pressure rating
Primary Applications/Restrictions
Aerospace, foundries, steel mills: Recommended Fluids
Medium pressure hydraulic applications Phosphate ester based hydraulic fluids, water-glycol
with phosphate ester fluids based fluids, air and water.
Do not use with petroleum based fluids Consult the chemical compatibility section on
page Ab-16 for more detailed information.
Applicable Specifications
Parker specification Temperature Range -40 °C up to +80 °C
Hose Construction Exception: Air........................................max. +70 °C
Water and water glycol fluids... max. +85 °C
Tube: EPDM synthetic rubber
Reinforcement: One high tensile steel wire braid Fittings Series
Cover: Green EPDM synthetic rubber Available as complete hose assemblies*
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
*Parker 43 series fittings are compatible with this hose and are available only on request
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• SAE 100R1 pressure rating
Recommended Fluids
Petroleum hydraulic fluids, lubricating oils, water-glycol
Primary Applications/Restrictions based fluids, air and water.
Medium pressure hydraulic applications Consult the chemical compatibility section on
at high temperature page Ab-16 for more detailed information.
Applicable Specifications Temperature Range -46 °C up to + 150 °C
SAE 100 R1AT Exception: Air........................................max. +70 °C
Hose Construction Water and water glycol fluids... max. +85 °C
Tube: PKR synthetic rubber Fittings Series
Reinforcement: One high tensile steel wire braid Parker 43 series for sizes -4 and -6
Cover: Blue synthetic rubber Parker 48 series for sizes -8 to -16
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• Compact hose construction
with tight bending radius
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction
• One wire braid construction
– two wire braid performance
• +125 °C working temperature
• Suitable with both 46 & 48 series fittings
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• Tough Cover – high abrasion resistant
• Constant pressure hose 21,0 MPa
Recommended Fluids
Primary Applications/Restrictions Petroleum and water-glycol based fluids, lubricating
General medium pressure hydraulic applications oils, air and water. For air above 1,7 MPa, the hose
where higher abrasion resistance is required cover must be pin-pricked.
Applicable Specifications Consult the chemical compatibility section on
page Ab-16 for more detailed information.
ISO 11237 Type R17 – SAE 100 R17
Hose Construction Temperature Range -40 °C up to +100 °C
Tube: Nitrile (NBR) Exception: Air........................................max. +70 °C
Reinforcement: One high tensile steel wire braid Water ...................................max. +85 °C
Cover: Synthetic rubber Fittings Series 48
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
RL=Delivered on reels
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive thin cover hose construction
• Excellent ozone resistance
• Ideal for low temperature
working conditions (-50 °C)
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction – Compact design
• Nitrile (NBR) inner tube
– extended fluid compatibility
Recommended Fluids
Primary Applications/Restrictions Petroleum and water-glycol based fluids, lubricating
Demanding medium pressure hydraulic oils, air and water. For air above 1,7 MPa, the hose
applications in all markets cover must be pin-pricked.
Applicable Specifications Consult the chemical compatibility section on
page Ab-16 for more detailed information.
EN 857 2SC / ISO11237 Type 2SC
Hose Construction Temperature Range -40 °C up to +100 °C
Tube: Nitrile (NBR) Exception: Air........................................max. +70 °C
Reinforcement: Two high tensile steel wire braids Water ...................................max. +85 °C
Cover: Synthetic rubber Fittings Series 46
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction – Compact design
• Nitrile (NBR) inner tube –
extended fluid compatibility
• Extreme abrasion resistant
cover
Primary Applications/Restrictions
Mobile market: Recommended Fluids
Medium pressure hydraulic applications Petroleum and water-glycol based fluids, lubricating
with extremely high abrasion risks oils, air and water. For air above 1,7 MPa, the hose
Applicable Specifications cover must be pin-pricked.
Consult the chemical compatibility section on
EN 857 2SC / ISO11237 Type 2SC
page Ab-16 for more detailed information.
Hose Construction
Temperature Range -40 °C up to +100 °C
Tube: Nitrile (NBR)
Reinforcement: Two high tensile steel wire braids Exception: Air........................................max. +70 °C
Cover: Synthetic rubber with a special Water ...................................max. +85 °C
polyethylene coating Fittings Series 46
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• 2 wire No-Skive Compact design
• For water up to +120 °C constant temperature
• Suitable with No-Skive 46 series fittings
Primary Applications/Restrictions
High pressure water cleaners
Hose Construction
Tube: Synthetic rubber
Reinforcement: Two high tensile steel wire braids
Temperature Range water: max. +120 °C
Cover: Synthetic rubber in black or blue
colour Fittings Series 46
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
WKS rubber hand grip for No-Skive high pressure water cleaning hoses can be found on page Eb-12.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction – Compact design
• 472TC: Nitrile (NBR) inner tube
– extended fluid compatibility
• Reduced bend radii
• Highly abrasion resistant
Pressure rating
472TC-20 32 1.1/4 -20 31,8 45 15,7 2250 63,0 9000 210 2,01
472TC-24 40 1.1/2 -24 38,1 51 12,5 1800 50,0 7200 250 2,16
472TC-32 50 2 -32 50,8 65 9,0 1300 36,0 5200 315 2,90
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction – Compact design
• Nitrile (NBR) inner tube
– extended fluid compatibility
Recommended Fluids
Petroleum and water-glycol based fluids, lubricating
Primary Applications/Restrictions oils, air and water. For air above 1,7 MPa, the hose
Demanding medium pressure hydraulic applications cover must be pin-pricked.
Applicable Specifications Consult the chemical compatibility section on
page Ab-16 for more detailed information.
EN 857 1SC / ISO11237 Type 1SC
Hose Construction Temperature Range -40 °C up to +100 °C
Tube: Nitrile (NBR) Exception: Air........................................max. +70 °C
Reinforcement: One high tensile steel wire braid Water ...................................max. +85 °C
Cover: Synthetic rubber Fittings Series 46
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction – Compact design
• Nitrile (NBR) inner tube –
extended fluid compatibility
• Extreme abrasion resistant
cover
Primary Applications/Restrictions
Mobile market: Recommended Fluids
Medium pressure hydraulic applications Petroleum and water-glycol based fluids, lubricating
with extremely high abrasion risks oils, air and water. For air above 1,7 MPa, the hose
Applicable Specifications cover must be pin-pricked.
Consult the chemical compatibility section on
EN 857 1SC / ISO11237 Type 1SC
page Ab-16 for more detailed information.
Hose Construction
Temperature Range -40 °C up to +100 °C
Tube: Nitrile (NBR)
Reinforcement: One high tensile steel wire braids Exception: Air........................................max. +70 °C
Cover: Synthetic rubber with a special Water ...................................max. +85 °C
polyethylene coating Fittings Series 46
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• One wire No-Skive construction
• For water up to +120 °C constant temperature
• Suitable with 48 series No-Skive fittings
Primary Applications/Restrictions
High pressure water cleaners
Hose Construction
Tube: Synthetic rubber
Reinforcement: One high tensile steel wire braid
Temperature Range water: max. +120 °C
Cover: Synthetic rubber in black or blue
colour Fittings Series 48
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
WKS rubber hand grip for No-Skive high pressure water cleaning hoses can be found on page Eb-12.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction – Compact design
• Nitrile (NBR) inner tube
– extended fluid compatibility
• Constant pressure hose 21,0 MPa
Primary Applications/Restrictions
Material handling: Recommended Fluids
General small bending radii hydraulic applications; Petroleum and water-glycol based fluids, lubricating
ideal for over the sheave or reel applications oils, air and water. For air above 1,7 MPa, the hose
Applicable Specifications cover must be pin-pricked.
Consult the chemical compatibility section on
Parker specification
page Ab-16 for more detailed information.
Hose Construction
Temperature Range -40 °C up to +80 °C
Tube: Nitrile (NBR)
Reinforcement: One or two high tensile Exception: Air .......................................max. +70 °C
steel wire braid
Cover: Synthetic rubber Fittings Series 46
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction – Compact design
• Nitrile (NBR) inner tube
– extended fluid compatibility
• Constant pressure hose 21,0 MPa
Primary Applications/Restrictions
Lifting and material handling equipment:
General small bending radii hydraulic applications; Recommended Fluids
over the sheave or reel applications Petroleum and water-glycol based fluids, lubricating
Applicable Specifications oils, air and water. For air above 1,7 MPa, the hose
cover must be pin-pricked.
Parker specification
Consult the chemical compatibility section on
Hose Construction page Ab-16 for more detailed information.
Tube: Nitrile (NBR)
Temperature Range -40 °C up to +80 °C
Reinforcement: One or two high tensile
steel wire braid Exception: Air........................................max. +70 °C
Cover: Synthetic rubber Fittings Series 46
Pressure rating
The combination of high temperature and high pressure could reduce the hose life.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction
• Small bend radii
Primary Applications/Restrictions
Recommended Fluids
All Markets: General applications
Petroleum and water-glycol based fluids, lubricating
Hose Construction oils, air and water.
Tube: Synthetic rubber Consult the chemical compatibility section on
Reinforcement: Two textile braids, combined with page Ab-16 for more detailed information.
wire spiraled throughout the textile
Temperature Range -40 °C up to +100 °C
reinforcement to prevent collapse
under vacuum Exception: Air........................................max. +70 °C
Cover: Oil and weather resistant Water ...................................max. +85 °C
synthetic rubber cover Fittings Series ** 48
Pressure rating
max. dynamic
working min. burst
Part Hose I.D. Hose pressure pressure Vaccum min.
Number O.D. kilo bend Weight
Pascal*1 radius
DN Inch Size mm mm MPa psi MPa psi kPa mm kg/m
811-12** 20 3/4 -12 19,1 30,0 2,1 300 8,3 1200 85 65 0,63
811-16** 25 1 -16 25,4 38,0 1,7 250 6,9 1000 85 75 0,96
811-20 32 1-1/4 -20 31,8 45,0 1,4 200 5,5 800 85 100 1,22
811-24 40 1-1/2 -24 38,1 52,0 1,0 150 4,1 600 85 130 1,55
811-32 50 2 -32 50,8 64,0 0,7 100 2,8 400 85 150 1,87
*1 = the vacuum values listed in the table are vacuum pressure values in kPa. For an absolute value subtract the table value from 101 kPa
Size 40 and 48 on request, with series 88 nipple plus clamp.
** size -12 and size -16 = on Parkrimp 2 crimping press or adjustable crimpers only
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Main Features
• No-Skive hose construction
• Up to +121 °C working temperature
• MSHA - approved hose cover
Recommended Fluids
Petroleum and water-glycol based fluids, lubricating
Primary Applications/Restrictions
oils, air and water.
All Markets: For high temperature applications Consult the chemical compatibility section on
For general applications page Ab-16 for more detailed information.
Hose Construction Temperature Range -40 °C up to +121 °C
Tube: Synthetic rubber
Exception: Air........................................max. +70 °C
Reinforcement: Two textile braids, combined with
Water ...................................max. +85 °C
wire spiraled throughout the textile
reinforcement to prevent collapse
under vacuum Fittings Series
Cover: Synthetic rubber size -12/-16 ............................. series 43
MSHA approved cover size -20/-24/-32 ....................... series 48
Pressure rating
max. dynamic
working min. burst
Part Hose I.D. Hose pressure pressure Vaccum min.
Number O.D. kilo bend Weight
Pascal*1 radius
DN Inch Size mm mm MPa psi MPa psi kPa mm kg/m
881-12 20 3/4 -12 19,1 30,0 2,1 300 3,0 1200 95 130 0,74
881-16 25 1 -16 25,4 38,0 1,7 250 6,9 1000 95 150 0,89
881-20 32 1.1/4 -20 31,8 45,0 1,4 200 5,5 800 95 200 1,32
881-24 40 1.1/2 -24 38,1 52,0 1,0 150 4,1 600 95 250 1,65
881-32 50 2 -32 50,8 63,0 0,7 100 2,8 400 95 300 1,89
*1 = the vacuum values listed in the table are vacuum pressure values in kPa. For an absolute value subtract the table value from 101 kPa
** Sizes -40 and -48 on request, with series 88 nipple plus clamp.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Catalogue 4400/UK
Medium Pressure Fittings
46 / 48 Series
DKL 90° BEL BEL 45° BEL 90° DKOS DKOS 45° DKOS 90°
D2 Cb-15 C6 Cb-16 3D Cb-17 49 Cb-56 9B 9C
DKR DKR 45° DKR 90° DKR 90° (Compact) DKOR DKOR 45° DKOR 90°
D9 Cb-25 91 Cb-26 B5 Cb-27 34
AGN Rigid – Straight AGJ Male SAE 45° - Rigid with O-ring - Rigid DKJ AGS
SFL SFL 22.5° SFL 45° SFL 90° SFS SFS 45° SFS 90°
89 XA XF XG XN
ORFS - short ORFS - long ORFS 45° ORFS Female 90° ORFS 90° - extra long ORFS 90° - long ORFS Male
JD Cb-53
Male Rigid Female Swivel Female Swivel Swivel Female Metric Metric Male
Gas Series - (24° Cone) Gas Series Gas Series - (Ball Nose) Male Metric (24° Cone) (Ball Nose) for Agriculture Valves
Male Metric L – Rigid Female Metric Swivel Male BSP Parallel Pipe Male BSP Parallel
Female Metric Female Metric Bulkhead with Locknut (M27x2) O-ring – Light Metru-Lok Swivel Rigid – Straight Pipe – L Series – Rigid
Swivel – (30° Flare) Swivel – (30° Flare) (24° Cone) Series Female (with O-ringSeal) Straight – ED-Seal
YW VW121 82 DP DR 5C 6C
others
7C 5S 5H 5T 59PT 5LPT T1
Catalogue 4400/UK
Medium Pressure Fittings
46 / 48 Series
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list. Material: Steel, zinc plated
Dimensions shown may be changed at any time without prior notice. C: Stainless Steel
CE – Female Metric 24° – Light Series with O-ring – Swivel – 45° Elbow
ISO 12151-2-SWE 45°-L, DKOL 45°
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
CF – Female Metric 24° – Light Series with O-ring – Swivel – 90° Elbow
ISO 12151-2-SWE-L, DKOL 90°
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Not recommended for new construction. Instead use C3 or CA. Should be assembled with cutting ring and nut.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Not recommended for new construction. Instead use CE. Should be used with cutting ring and nut.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Not recommended for new construction. Instead use CF. Should be used with cutting ring and nut.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C.
Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb.
Material: Steel, zinc plated; °Assembly only with Parkrimp 2 machine
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
0C – Female Metric 24° – Heavy Series with O-ring – Swivel – 45° Elbow
ISO 12151-2 – SWE 45°-S, DKOS 45°
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C.
Hose fittings with special O-rings( Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb.
°Assembly only with Parkrimp 2 machine
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
1C – Female Metric 24° – Heavy Series with O-ring – Swivel – 90° Elbow
ISO 12151-2 – SWE-S, DKOS 90°
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C.
Hose fittings with special O-rings (Viton or EPDM) available on request.
For O-ring dimensions and part-numbers see Section Eb.
Material: Steel, zinc plated
°Assembly only with Parkrimp 2 machine
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Not recommended for new construction. Instead use C9. Should be used with cutting ring and nut.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
B4 – Female BSP Parallel Pipe – Swivel – 90° Elbow Block Type (60° Cone)
BS 5200-E
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C.
Hose fittings with special O-rings (Viton or EPDM) available on request.
For O-ring dimensions and part-numbers see Section Eb.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C.
Hose fittings with special O-rings (Viton or EPDM) available on request.
For O-ring dimensions and part-numbers see Section Eb.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C.
Hose fittings with special O-rings (Viton or EPDM) available on request.
For O-ring dimensions and part-numbers see Section Eb.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
06/68 – Female – JIC 37° / SAE 45° Dual Flare – Swivel – Straight
ISO12151-5-SWS – DKJ
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list. °Assembly only with Parkrimp 2 machine
Dimensions shown may be changed at any time without prior notice. Material: Steel, zinc plated
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
37/3V – Female JIC 37° /SAE 45° – Dual Flare – Swivel Female 45° Elbow
ISO 12151-5-SWE 45° – DKJ 45°
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
39/3W – Female JIC 37° / SAE 45° – Dual Flare – Swivel Female 90° Elbow
ISO 12151-5-SWES – DKJ 90°
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
41/3Y – Female JIC 37° / 45° Swivel Female 90° Elbow (Long)
ISO 12151-5-SWEL – DKJ 90°L
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
JM – ORFS Male
ISO 12151-1-S – SAE J516
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
46 48
DN Inch Size mm mm mm mm
14946-10-4 14948-10-4 6 1/4 -4 6,3 10 47 24
14946-12-4 14948-12-4 6 1/4 -4 6,3 12 50 26
14946-14-4 14948-14-4 6 1/4 -4 6,3 14 51 28
14946-17-4 14948-17-4 6 1/4 -4 6,3 17 52 29
14946-14-5 14948-14-5 8 5/16 -5 7,9 14 52 28
14946-16-5 14948-16-5 8 5/16 -5 7,9 16 53 30
14946-16-6 14948-16-6 10 3/8 -6 9,5 16 53 30
14946-17-6 14948-17-6 10 3/8 -6 9,5 17 53 30
14946-18-6 14948-18-6 10 3/8 -6 9,5 18 55 32
14946-22-6 14948-22-6 10 3/8 -6 9,5 22 58 35
14946-18-8 14948-18-8 12 1/2 -8 12,7 18 56 32
14946-22-8 14948-22-8 12 1/2 -8 12,7 22 59 35
14946-22-10 14948-22-10 16 5/8 -10 15,9 22 60 35
14946-26-12 14948-26-12 20 3/4 -12 19,1 26 66 40
14946-27-12 14948-27-12 20 3/4 -12 19,1 27 66 40
14948-30-16 25 1 -16 25,4 30 77 47
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Rubber hand grip Part-No. WKS-X-XXX in black or blue please find on page Eb-12.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
48 301SN, 421SN, 426, 436, 441, 451TC, 471TC /472TC, 493, 811, 881
Rubber hand grip Part-No. WKS-X-XXX in black or blue please find on page Eb-12.
Material: Steel, zinc plated
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
46 441, 461LT, 462, 462ST, 463, 492, 492ST, 692, 692 TWIN
Information about standard products or non-standard products can be found in the current price list.
Dimensions shown may be changed at any time without prior notice.
Catalogue 4400/UK