Академический Документы
Профессиональный Документы
Культура Документы
Output Ratings
Generating Set Model P675P1 P750E1
Prime* Standby*
480V, 60 Hz 675 kVA 750 kVA
540 kW 600 kW
Technical Data
Engine Make & Model Perkins 2806C-E18TAG3
Alternator Model LL7024J
Base Frame Type Heavy Duty Fabricated Steel
abcde
FG Wilson (Engineering) Ltd
Old Glenarm Road, Larne, County Antrim BT40 1EJ
Northern Ireland, United Kingdom
Tel: 44 (0) 28 2826 1000 Fax: 44 (0) 28 2826 1111
www.FGWilson.com
P675P1/P750E1
2
P675P1/P750E1
Motor Starting
Capability*kVA 1283 1694 1993
Short Circuit
Capacity % 300 300 300
Reactances:
Per Unit
Winding Pitch Code: 2/3- (No. 6S) Total Harmonic Content LL/LN <4%
Suppression is in line with European
Wires: 12 Radio Interference Standard EN61000-6
3
P675P1/P750E1
Technical Data
3 Phase Ratings and Performance at 60 Hz, 1800 RPM
Definitions
Standby Rating Prime Rating Standard Reference Conditions
These ratings are applicable for supplying These ratings are applicable for supplying Note: Standard reference conditions 27˚C
continuous electrical power (at variable load) continuous electrical power (at variable load) (80˚F) Air Inlet Temp, 152.4m (500ft) A.S.L.
in the event of a utility power failure. No in lieu of commercially purchased power. 60% relative humidity. All engine
overload is permitted on these ratings. The There is no limitation to the annual hours of performance data based on the above
alternator on this model is peak continuous operation and this model can supply 10% mentioned maximum continuous ratings. Fuel
rated (as defined in ISO8528-3). overload power for 1 hour in 12 hours. consumption data at full load with diesel fuel
with specific gravity of 0.85 and conforming to
BS2869: 1998, Class A2.
L W
General Data
Documents Generating Set Standards Warranty
A full set of operation and maintenance The equipment meets the following standards: All equipment carries full manufacturer's
manuals, circuit wiring diagrams, and BS5000, ISO 8528, warranty. Extended warranty terms available.
commissioning/fault finding instruction ISO 3046, IEC 60034, VDE 0530, NEMA For details on warranty cover please contact
leaflets. MG-1.22. your local dealer, or visit our website,
www.FGWilson.com
FG Wilson is a fully accredited ISO9001
company.
955-702 In line with our policy of continuous product development, we reserve the right to change specification without notice. P675P1-P750E1/TECHDATA/FGW/1104