Академический Документы
Профессиональный Документы
Культура Документы
Installation Manual
Manuel d’installation Manual de instalación Manuale di installazione Handleiding
Installatie Installationsanleitung Installationsmanual Kurulum kılavuzu
Руководство по установке 設置マニュアル 安装手册
174 (6.85”)
3,50 (0.138”)
33 (1.3”) 10 (0.39”)
140 (5.51”)
187 (7.36”)
1,1kg 24VDC
2,4lbs 6,25A (150W) IP30
10-40ºC Rh 10-90%
50-104ºF non condensing
Photocell Input
Description Specifications
1 -
2 -
3 -
4 Ground
5 24VDC Output 24VDC, 200mA max.
ONLY for powering a photocell!
6
7 Trigger 2 (shared with Input 2) NPN/PNP photocell
Do not connect external power source
For other device except a photocell activating the Trigger, follow
the connection guide on page one of this manual.
8
9 Trigger 1 (shared with Input 1) NPN/PNP – Use bounce free trigger.
Do not connect externa
For other device except a photocell activating the Trigger, follow
the connection guide on page one of this manual.
Encoder Input
Description Specifications
A B A B
1x7 1x7
A B 1x16 1x16
A B A B A B
Order number 795 714.01
A B Y Y Y Y Y
Y
1x32 1x16 1x7 1x7 1x7 1x7 1x7 1x7 1x7 1x7 1x7
All VIAjet devices have 2 opto-isolated inputs (generally used as trigger inputs, put can be used as generic I/O).
Photocell 1 - Activate by shorting pin 9 to pin 4 using a POTENTIAL FREE opto-coupler or a bounce-free relay
Photocell 2 - Activate by shorting pin 7 to pin 4 using a POTENTIAL FREE opto-coupler or a bounce-free relay
Photocell I/O connector OUTPUT, on all VIAjet PTM devices (L-Series, T-Series, V-Series)
All VIAjet devices have 1 relay output (generally used as status indication or ink supply activation).