UniPRO MGig1/UniPRO SEL1

Update Instructions

Release Notes (Summary)

Version 1.0.17
May 2020

Main fixes since version v1.0.14 (for full details, refer to release notes doc)

• Now compatible with different vendors CPU on touch

screen and keyboard (UniPRO MGig1)

www.idealnetworks.net
 UniPRO MGig1/UniPRO SEL1
Update Instructions

CAUTION
• This upgrade is not reversible
• All saved data will be erased after upgrading. Back up data via USB
before upgrading

UniPRO MGig1 Software Update Procedure v1.0.17:

1. Copy the file UniPRO-MGig1-md5.bin to the root directory of a USB

memory key
2. Ensure that the tester is connected to the mains power supply, or that
the battery is fully charged
3. Switch the tester ON
4. Insert the USB memory key into the tester
5. Save any results stored in the tester (all data and settings will be lost
following the software update)
6. From the HOME screen, select F4(SETUP) /SYSTEM/ UPDATE
7. Select Fl (UPDATE)
8. Wait for the update to be completed

UniPRO SEL1 Software Update Procedure v0.0.35:

1. Copy the file UPSEL1.bin to the root directory of a USB memory key
2. Ensure that the tester is connected to the mains power supply, or that
the battery is fully charged
3. With the tester switched OFF, insert the USB memory key into the
tester
4. Press and hold the AutoTest button
5. Switch the tester ON. The LEDs will flash in sequence
6. Wait for the update to be completed, when the LEDs stop flashing

UniPRO SEL1 Configuration Utility v0.0.2:

1. Copy the file UPSEL1 Config.xls to a Windows® PC

2. Launch the utility using Excel®

IDEAL INDUSTRIES NETWORKS LIMITED

IDEAL NETWORKS and UniPRO logos are trademarks
or registered trademarks of IDEAL INDUSTRIES
NETWORKS LIMITED.
Stokenchurch House, Oxford Road, Stokenchurch,
High Wycombe, Buckinghamshire, HP14 3SX, UK.
Tel. +44 (0)1925 428 380 | Fax. +44 (0)1925 428 381
uksales@idealnwd.com
Specification subject to change without notice. E&OE
www.idealnetworks.net © IDEAL INDUSTRIES NETWORKS LIMITED 2020

Proof of Performance