Академический Документы
Профессиональный Документы
Культура Документы
Butterfly Valves
Check Valves
Control Valves
Gate Valves
Plug Valves
Many new Flomatic valve products in
2017 are now NSF/ANSI 61 certified.
These products are marked with a
NSF/ANSI 61 logo.
of the pressure switch, pressure gauges and many other types of accessories. These
valves have very low head loss and noiseless operation. The valves have extra-large
bosses that give more threads to ensure the fitting is secure. The male threaded end of
accessories will not interfere with the check valve operation or poppet.
See Page: 3 & 9
TABLE OF CONTENTS
Air Release/ Vacuum Page Break Off Plugs 5 Unleaded Bronze Page
Miniair®, Maxiair®, Wellair® 31 Y-Strainers 21
Comboair , Sewair Series 31,32
® ®
Check Valves Page
Backflush 32 Ball Check Cast Iron Page
Auto-Drain - Model 70 3 508, 408,4082,208,208T,208B 14 Air Release/Vacuum 31-32
Auto-Vac® - Model 77 14 Globe Style Silent Check Ball Check 14
402BT, 402BTR, 402S6, 402S6R 11 Foot Valve 20
Automatic Control Valve Page Hydraulic Check Globe Style Silent Check 11
Altitude – C1001, CF1001 25 Strainer 21
C201, CF201, Swing Check 12
C205, CF205 23 Drain Back 3 Wafer Check 11
Back Pressure – Submersible Check
C301, CF301 23 80E Series, 100E, 100XLE, 1,3
Ductile Iron Page
Cycle Gard® – CB152E, C153 80EVFD, 100EVFD, 2
Check Valves 4-6
C3100E, CI, CN, C152E Series 30,29 80DI, 80DI8R, 82DI8R-VFD
80MDWVFD, 80DIVFD, 4 Plug Valves 15
Float Valve Control Valve 22-27
80DI8RVFD 4
C701, CF701 24 Swing Check 13
82DP, 2DI-VFD, 6
Flow Control
80DIA, 80DIB 5
C901, CF901 25 80DICLVFD, 80SL 6 Galvanized Page
Hydraulic Check 82S6-VFD, 80MS6-VFD, Strainers 21
C1001, CF1001 25 80S6VFD, 10
Pressure Reducing 100SSVFD, 100MSSVFD 9 Plastic Page
C101, CF101, C150E 23 Swing Check Ball Check 14
Pressure Relief 78A, 78, 90/92, 93 Series 12 In-line Check 14
C401, CF401 24 745, 745BF, 745PI, 745BFPI 13 Insert Check 14
Pump Control Foot Valves 19
C601, CF601, C621 24 Wafer & SS Check Strainers 21
Solenoid Actuated Split Disc®, 888, 888S6 7,11 Submersible Check 14
C801-2, CF801-2 25 812X, 888VFD
Surge Arrestor 816, 816FL, 816HS Series 7 Stainless Steel Page
C501, CF501 24 Foot Valve 20
Foot Valves Page Strainers 21
Backflow Preventers Page 60SE, 333 Series, 190 Series, Submersible Check 8-10
Hose Connection Vacuum Breaker 124P, 104 Series, 19 Wafer Check 11
GFHB8 33 357, 63, 812 Series, 20
Dual Check Valve, GF8080E, 80S6FVFD, 302BT, 302S6 20 Unleaded Bronze Page
GF8080SS 33 Series 16, 16FL 21 Foot Valves 19
Dual Check Valve w/ Atmos. Vent
800.833.2040
In-line Check 1-3
GF8200 33 Gate Valves & Shut Off Page Strainers 21
Plug Valves 15
Submersible Check 1-3
Unleaded Ball Valves Page NRS AWWA C515, C509, 34
(Quarter Turn) OS&Y AWWA C509 34
Sales Agents 35
SS Ball Valves 25
Strainers Page
Butterfly Valves Page 6P, 46 Series, 6SE 21
®
Azure AWWA C504 16 Y Strainers 21
®
Kwik-Close 16
Sylax® Wafer & Lug Style 17 Go to www.flomatic.com and type the model
Sylax® Electric Actuated 18
number in the search Product/Site Search
80E - ENVIRO CHECK® body casting unleaded bronze with 80ME - ENVIRO CHECK® body casting unleaded bronze. This 80AE - ENVIRO CHECK® body casting unleaded bronze. This
threaded female x female connection. This valve features a non- valve features a non-spin poppet, with a NITRILE (Buna-N) seal valve features a non-spin acetal (3/4"- 2") or unleaded bronze (2
spin acetal (1/2"- 2") or unleaded bronze (21/2"- 4") poppet with a and stainless steel spring. 1/2"-4") poppet with a NITRILE (Buna-N) seal and stainless steel
NITRILE (Buna-N) seal and a stainless steel spring. Temp Max: 180°F (80C) Pressure Max: 400 PSI spring and a 1/8" drilled and tapped hole on the inlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/ " 4040E .7 100 $ 53.53
1"M x 1"F 4071E .7 50 $ 54.16 4
1/ "* 5118E* .2 10 $ 61.79
4 2"M x 2"F 4079E 2.5 16 $ 154.00 1" 4041E 1.2 50 $ 59.59
3/ "* 5159E* .2 10 $ 62.11
8 11/4 " 4042E 1.5 36 $ 79.79
1/ " 4029E .2 100 $ 43.89
2 11/2 " 4043E 2.4 25 $ 97.97
3/ "
1"
4 4030E
4031E
.7
1.3
100
50
$
$
44.45
47.71
New NSF/ANSI 61 2"
21/2"*
4044E
4045E*
3
6.4
16 $ 157.00
$ 788.00
11/4 " 4032E 1.6 36 $ 67.17 Certified Valves
ENVIRO CHECK® VALVES 800.833.2040
®
80BE - ENVIRO CHECK body casting unleaded bronze with 80CE - ENVIRO CHECK® body casting unleaded bronze.
two drilled and tapped holes; 1/8"inlet side and 1/4" outlet side. Control Center with four tappings; one 1/8" inlet side, two 1/4" out-
This valve features a non-spin acetal (3/4"- 2 ") or unleaded bronze let sides, one 1/8" outlet side with a brass plug. This valve features
( 2 1/2"- 4") poppet with a NITRILE (Buna-N) seal and stainless a non-spin acetal poppet with a NITRILE (Buna-N) seal and stain-
steel spring. less steel spring. ®
Temp Max: 180°F (80C) Pressure Max: 400 PSI 80XBE - ENVIRO CHECK body casting unleaded bronze
with two 1/4"
tapped holes on the outlet side for pressure switch
SIZE PART NO. WGT. CASE QTY. LIST PRICE Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
and gauge. This valve features a non-spin acetal poppet with a
3/ " 4050E .6 100 $ 55.55
4 NITRILE (Buna-N) seal and stainless steel spring.
1" 4051E 1 50 $ 64.64 1" 4061E 1.2 50 $ 65.15
11/4 " 4052E 1.5 36 $ 78.78 11/4 " 4062E 1.8 36 $ 83.83
Temp Max: 180°F (80C) Pressure Max: 400 PSI
11/2 " 4053E 2.3 25 $ 103.00 11/2 " 4063E 2.7 25 $ 106.05
2" 4064E 3.1 16 $ 190.00
SIZE PART NO. WGT. CASE QTY. LIST PRICE
2" 4054E 2.9 16 $ 159.00
21/2 "* 4055E* 6.3 $ 735.00 21/2 "* 4065E* 2.7 25 $ 741.34 1" 7961E 1.2 50 $ 65.15
3"* 4056E* 13 $ 1,037.00 * Unleaded bronze poppet, 21/2" is recommended for vertical 11/4 " 7963E 1.6 36 $ 83.83
4"* 4057E* 25 $ 1,356.00 applications. See 80DIX or 80DI-VFD for horizontal. 11/2 " 7964E 2.8 25 $ 106.00
80BE with 1/4" Tapped Holes on Both Ends 2" 7965E 3.2 16 $ 190.00
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7971E 1 50 $ 64.64
11/4 " 7972E 1.5 36 $ 78.78 Patent and other patents pending
11/2 " 7973E 2.3 25 $ 103.00
2" 7974E 2.9 16 $ 159.00
NOTE: ENVIRO CHECK WITH SS POPPET ADD "S"
* Unleaded bronze poppet, 21/2" and larger are recommended for
vertical applications. See 80DIB for horizontal. TO END OF PART # AND 10% TO LIST.
www.flomatic.com 1
100E Discount Code A 100ME Discount Code A 100XLE Discount Code A
70 - Auto-Drain- This 1” valve is available in stainless steel, 1" 4031HTE 1.4 $ 80.09
and PVC. All internal parts are engineered composite, with a 11/4 " 4032HTE 1.7 $ 110.00
VISIT
stainless steel disc and resilient seat. 11/2 " 4033HTE 2.7 $ 154.00
Temp Max: 180°F (80C) Pressure Max: 400 PSI 2" 4034HTE 4.0 $ 218.00
21/2 " 4035HTE 6.5 $ 730.00
OUR WEB
5 PSI – open pressure – standard 3" 4036HTE 13 $ 865.00
MATERIAL PART NO. CASE QTY. LIST PRICE 4" 4037HTE 25 $ 1,572.00
PVC 4501PX
Stainless Steel 4501SSX
W!
W!
W!
NE
NE
NE
80EVFD/100EVFD-ENVIRO CHECK® - body casting 80AEVFD-ENVIRO CHECK® - Body casting unleaded bronze ®
80BEVFD-ENVIRO CHECK - Body casting unleaded
unleaded bronze with threaded female x female connection. The with threaded female x female connection. The valve features a bronze with threaded female x female connection. The valve fea-
valve features a high strength patented guide and poppet and high strength patented guide, poppet and spring with a NITRILE
spring with a NITRILE (Buna-N) seal. tures a high strength patented guide, poppet and spring with a
(Buna-N) seal. This valve has a 1/8" drilled and tapped hole on the NITRILE (Buna-N) seal. This valve has two drilled and tapped
Temp Max: 180°F (80C) Pressure Max: 400 PSI inlet side. holes; 1/8" inlet side and 1/4" outlet side.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
Composite Poppet & Guide SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
1” 4201EVFD 1 50 $ 53.82 1" 4041EVFD 1.2 36 $ 68.68 1" 4051EVFD 1 36 $ 74.74
1” 4031EVFD 1 50 $ 56.68 11/4 " 4042EVFD 1.5 36 $ 91.91 11/4 " 4052EVFD 1.5 36 $ 90.90
11/4 " 4202EVFD 1.4 36 $ 73.73 11/2 " 4043EVFD 2.4 25 $ 113.12 11/2 " 4053EVFD 2.3 25 $ 119.00
11/4 " 4032EVFD 1.4 36 $ 79.79
80BE with 1/4" Tapped Holes on Both Ends
11/2 " 4033EVFD 2.5 25 $ 112.11 80AE with a 1/4" Tapped Hole on the Inlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE
ENVIRO CHECK® VALVES 800.833.2040
W!
NE
NE
NE
®
80CEVFD-ENVIRO CHECK® - Body casting unleaded bronze 80XBEVFD-ENVIRO CHECK - Body casting unleaded 100MEVFD-ENVIRO CHECK® - Body casting unleaded
with threaded female x female connection. The valve features a bronze with threaded female x female connection. The valve fea- bronze with threaded male x female connection. The valve fea-
high strength patented guide, poppet and spring with a NITRILE tures a high strength patented guide, poppet and spring with a tures a high strength patented guide, poppet and spring with a
(Buna-N) seal. Control center with four tapping; one 1/8" inlet NITRILE (Buna-N) seal. This valve has two ¼” tapped holes on the NITRILE (Buna-N) seal.
side, two 1/4" outlet sides, one 1/8" outlet side with a brass plug. outlet side for pressure switch and gauge. Temp Max: 180°F (80C) Pressure Max: 400 PSI
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4061EVFD 1.2 36 $ 75.75 1"M x 1"F 4071EVFD .7 50 $ 62.62
1" 7961EVFD 1.2 36 $ 75.75
11/4 " 4062EVFD 1.8 36 $ 96.96 11/4 "M x 1"F 4221EVFD 1.4 50 $ 54.54
11/4 " 7963EVFD 1.6 36 $ 96.96
11/2 " 4063EVFD 2.7 25 $ 122.00 11/4 "M x 11/4 "F 4242EVFD 1.5 50 $ 69.69
11/2 " 7964EVFD 2.8 25 $ 122.00
11/2 "M x 11/4 "F 4223EVFD 1.5 36 $110.09
www.flomatic.com 3
Flomatic Submersible ®
4
High Quality Valves Built to Last... www.flomatic.com
80DI Discount Code A 80DIX Discount Code A 80DI8R Discount Code A
flomatic vfd
100MDI- High strength epoxy coated ductile iron valve features
male threaded inlet and female threaded outlet. Ideal for
submersible pumps.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
BREAK-OFF PLUG- Stainless steel 304 construction. Threaded
to install into valve. When broken off, riser pipe drains.
SIZE PART NO. WGT. LIST PRICE Temp Max: 180°F (80C) Pressure Max: 600 PSI
11/4 "M x 1"F 4221LDI 1 $ 24.75
SIZE PART NO. BREAK OFF PLUG LIST PRICE
11/4 "M x 11/4 "F* 4242LDI* 1.4 $ 35.35
2" 76098-2 1/4" $ 65.24
2"M x 2"F 4084VFD 4.5 $ 223.21
2 1/2" 76098-3 3/8" $ 66.95
*Longer threads. 3/8"
3" 76098-6 $ 67.19
4" 76098-7 3/8" $ 67.18
COMPOSITE
BREAK-OFF PLUG Discount Code A
80DIA- Standard high strength epoxy coated ductile iron body 80DIB- Standard high strength epoxy coated ductile iron body
with 1/8" tapped hole on the inlet side. with 1/8" tapped hole on inlet side and 1/4" tapped hole on the
outlet side.
Note: 1" through 11/2" features acetal poppet.
Note: 1" through 11/2" features acetal poppet.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART NO. WGT. CASE QTY LIST PRICE
1" 4041DI .2 50 $ 43.43
11/4 " 4042DI .7 36 $ 52.52 1" 4051DI .2 50 $ 43.43
11/2 " 4043DI 1.3 25 $ 69.69 11/4 " 4052DI .7 36 $ 52.52 COMPOSITE BREAK-OFF PLUG- Threaded 3/8" to install
2" 4044DI 5 16 $ 118.17 11/2 " 4053DI 1.3 25 $ 69.69 into valve. When broken off, riser pipe drains.
21/2 "* 4045DI 7 $ 342.39 2" 4054DI 5 16 $ 118.17 Temp Max: 180°F (80C) Pressure Max: 600 PSI
3"* 4046DIX* 10 $ 441.37 21/2"* 4055DI 7 $ 342.39
SIZE PART NO. WGT. LIST PRICE
4"* 4047DIX* 19 $ 585.80 3"* 4056DIX* 10 $ 441.37
4"* 4057DIX* 19 $ 585.80 3"–6" 76098P .1 $ 24.24
* 80DIX double guided poppet. Can be installed vertical
or horizontal. * 80DIX double guided poppet. Can be installed vertical * One size fits all break-off is for 6” size valves and marked
or horizontal. where to cut for smaller 3” & 4” size valves.
5
80DI Turbo Discount Code A 80MDI Discount Code A 80DICLVFD Discount Code A
80 Slim Line® Discount Code A number for 4"-6" and add $100.00 to list price of valve, 3"
4"
7938CLSVFD
7939CLVFD
10
27
$ 378.75
$ 516.11
$75.00 added for composite plug installed and add “PPLG” to
end of part number. 5" 4088CLVFD 32 $ 838.30
W!
82DI-VFD - High strength epoxy coated ductile iron body, 80MDI-VFD- High strength epoxy coated ductile iron body,
poppet and stainless steel guide with threaded male x male con- high strength poppet and guide with threaded male x female NPT
nection. Features a NITRILE (Buna-N) seal, stainless steel shaft, connection. Features a NITRILE (Buna-N) seal, stainless steel shaft,
and ductile iron poppet. Designed for vertical or horizontal appli- and ductile iron poppet. Designed for vertical or horizontal appli- 82DP- Dual purpose compact ductile iron reduced ported check
cations. cations. Full ported valve. valve with male and female threads on both ends. High strength
ductile iron body and poppet, with stainless steel spring and
Temp Max: 180°F (80C) Pressure Max: 600 PSI Temp Max: 180°F (80C) Pressure Max: 600 PSI fasteners. Designed to fit into tight fitting wells.
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE Temp Max: 180°F (80C) Pressure Max: 400 PSI
2"M x 2"M* 4093VFD* 6 $ 177.26 11/4"M x 1"F 4221DIVFD 1 $ 29.69 SIZE PART NO. WGT. LIST PRICE
2"M x 2"M 4093SVFD 6 $ 196.95 11/4"M x 11/4"F 4242DIVFD 1.2 $ 42.42
21/2" F & 3" M* 4094DP* 7 $ 328.25
3"M x 3"M 4094SVFD 6 $ 341.38 2"M x 2"F* 4084VFD* 4 $ 223.00
3" F & 4" M 4095DP 10 $ 416.12
3"M x 3"M* 4094VFD* 6 $ 383.80 2"M x 2"F 4084SVFD 4 $ 245.50
4" F & 5" M 4096DP 25 $ 784.77
4"M x 4"M 4095VFD 12 $ 550.45 3"M x 3"F 4083VFD 14 $ 379.05
5" F & 6" M 4097DP 51 $ 1,577.00
5"M x 5"M 4096VFD 27 $ 843.35 4"M x 4"F 4077VFD 22 $ 566.61
6"M x 6"M 4097VFD 40 $ 1,788.00 5"M x 5"F 4075VFD 23 $ 988.79
6"M x 5"F 4087VFD 48 $ 1,129.00
Same valve as 82, extra female (internal) threads.
8"M x 8"M 4098VFD 63 $ 2,384.00
6"M x 6"F 4081VFD 50 $ 1,199.00 Note: RESTRICTED FLOW - REDUCED PORTED, SEE VFD MODEL FOR FULL
To order with break-off plug, add “PLG” to part
PORTED, HIGH FLOW DESIGN.
number and add $100.00 to list price of valve, $75.00 added To order with break-off plug, add “PLG” to part
for composite plug installed and add “PPLG” to end of part number and add $100.00 to list price of valve, $75.00 added * Unleaded Bronze Poppet
number. for composite plug installed and add “PPLG” to end of part
* Not for horizontal installation, see 4094SVFD & 4093SVFD. number.
*Not for horizontal installation, see 4084SVFD.
1 - THREADED N.P.T.
2 - SOCKET WELD SCH. 80 add 10%
3 - BUTT WELD SCH. 80 add 10%
4 - FLANGED END 150# CLASS
812XT- All 316 stainless steel, threaded 3 piece check valve and
5 - BSPP body. Metal to metal seating, teflon O-ring. 1 1/2"–8" available
6 - PN 10 with NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"–6"
available with socket weld connection, add 25% to list.
1 - 316 STAINLESS STEEL
2 - WCB STEEL - (carbon steel) Temp Max: Metal Seating only 400°F (200C)*
STAINLESS STEEL CHECK VALVES 800.833.2040
816 Discount Code B 816FL Discount Code B *Consult factory for temp. & pressure rating. **230 PSI Max
Also available with Butt (XB) and Socket Weld (XS) ends.
OUR WEB
1/ " 2420X .2 $ 89.00
2
3/ " 2421X .3 $ 118.00
4
816HS- Same body as Model 816 with heavy spring for higher 1" 2422X .5 $ 138.00
cracking pressure.
SITE AT
11/4 " 2423X .7 $ 182.00
SIZE PART NO. CRACKING PRESSURE LIST PRICE
11/2 " 2424X 1.4 $ 269.00
1” YV001110107-08 8 PSI $328.00 2" 2425X 2.3 $ 313.00
1” YV001110107-10 10 PSI $328.00 21/2 "
www.flomatic.com 1”
1”
YV001110107-15
YV001110107-20
15 PSI
20 PSI
$328.00
$328.00
3"
2426X
2427X
3.9
5.4
$
$
372.00
472.00
4" 2428X 7.8 $ 629.00
1” YV001110107-30 30 PSI $328.00 5" 2429X 20 $ 2,305.00
Consult factory for pricing and other sizes and body materials. 6" 2430X 32 $ 2,909.00
*Note: the last 2 digits are the weight of the spring. 8"** 2431X** 67 $ 5,050.00
8" 2432X 64 $ 5,500.00
*Consult factory for temp. & pressure rating. **230 PSI Max
www.flomatic.com 7
80SS/100SS Discount Code A 100MSS Discount Code A 100XLSS Discount Code A
80SS WITH A TAPS - All 303 stainless steel one piece body. 80SSB - body is all 303 stainless steel one piece body with two
This valve features a non-spin acetal poppet with a NITRILE (Buna- drilled and tapped holes; 1/8" inlet side and 1/4 " outlet side. 80SSXB - body is all 303 stainless steel one piece body with
two 1/4 " tapped holes on outlet side for pressure switch and
N) seal and stainless steel spring with a 1/8" drilled and tapped hole gauge. This valve features a non-spin acetal poppet with a NITRILE
Temp Max: 180°F (80C) Pressure Max: 400 PSI
on the inlet side. (Buna-N) seal and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE Temp Max: 180°F (80C) Pressure Max: 400 PSI
1" 4051SS2 1 50 $ 78.78 SIZE PART NO. WGT. CASE QTY. LIST PRICE
80SSA with a 1/8" Tapped Hole on the Inlet Side 11/4 " 4052SS2 1.5 36 $ 96.96 1" 7961SS2 1.2 50 $ 83.83
SIZE PART NO. WGT. CASE QTY. LIST PRICE 11/2" 4053SS2 2.3 25 $ 126.25 11/4 " 7963SS2 1.6 36 $ 105.04
2" 4054SS2 2.9 16 $ 193.92
1" 4041SS2 1.2 50 $ 70.70
11/4 " 4042SS2 1.5 36 $ 97.97 80SSB with 1/4" Tapped Holes on Both Ends
11/2 " 4043SS2 2.4 25 $ 121.20 SIZE PART NO. WGT. CASE QTY. LIST PRICE
2" 4044SS2 3 16 $ 191.90 1" 7971SS2 1 50 $ 78.78
8
100SSVFD Discount Code A 100MSSVFD Discount Code A
10 Reasons to Select
W! Flomatic VFD Valves
W!
NE
NE
• 100% Open Valve Seat
• Stabilizing poppet
• Noiseless operation
100SSVFD - All 304 stainless steel female x female threaded check 100MSSVFD - All 304 stainless steel male x female thread-
valve body features patented VFD design with stainless steel spring, ed check valve body features patented VFD design with stainless • Full Flow Design
poppet and a NITRILE (Buna-N) seal. steel spring, poppet and a NITRILE (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
• VFD Compatible
STAINLESS STEEL CHECK VALVES 800.833.2040
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. CASE QTY. LIST PRICE • Simpler Patented Design
1" 4201SS2VFD 1 50 $ 59.39 1"M x 1" F 4220SS2VFD 50 $ 61.32
11/4 " 4202SS2VFD 2 36 $ 80.50 11/4"M x 1"F 4221SS2 VFD 50 $ 61.81 • Low Headloss
11/2" 4203SS2VFD 2 36 $ 115.16 11/4"M x 11/4"F 4242SS2VFD 50 $ 76.36
For SS poppet, add “S” between 2 and V of the part 11/2"M x 11/4"F 4223SS2VFD 36 $ 100.99 • 100% Water Tested
number and add 10%.
W!
W!
NE
NE
NE
80SSVFD WITH A TAPS - All 304 stainless steel female x 80SSBVFD - All 304 stainless steel female x female threaded 80SSXBVFD - All 304 stainless steel female x female thread-
female threaded check valve body features patented VFD design check valve body features patented VFD design with stainless steel ed check valve body features patented VFD design with stainless
with stainless steel spring, poppet and a NITRILE (Buna-N) seal. This spring, poppet and a NITRILE (Buna-N) seal. This valve has two steel spring, poppet and a NITRILE (Buna-N) seal. This valve has
valve has a 1/8" drilled and tapped hole on the inlet side. drilled and tapped holes; 1/8" inlet side and 1/4"outlet side. two ¼” tapped holes on the outlet side for pressure switch and
gauge.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
80SSA with a 1/8" Tapped Hole on the Inlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 4051SS2VFD 1 36 $ 94.54 1" 7961SS2VFD 1.2 36 $ 100.61
11/4 " 4052SS2VFD 1.5 36 $ 116.35 11/4 " 7963SS2VFD 1.6 36 $ 125.51
1" 4041SS2VFD 1.2 36 $ 84.84
11/2" 4053SS2VFD 2.3 25 $ 151.50
11/4 " 4042SS2VFD 1.5 36 $ 117.56
11/2 " 4043SS2VFD 2.4 25 $ 145.44 80SSB with 1/4" Tapped Holes on Both Ends
80SSA with a 1/4 " Tapped Hole on the Inlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE
9
80S6 Discount Code A 80S6VFD Discount Code A 82S6VFD Discount Code A
UPDATED
PRODUCT
LIVE 3D SHIPMENT APPROVAL
CHAT ANIMATIONS TRACKING
FLOMATIC VALVES IS AN ACTIVE MEMBER IN
THESE INDUSTRY ASSOCIATIONS AND OTHERS
www.watersystemscouncil.org
10
402BTR/402BT Discount Code B 402S6R/402S6 Discount Code B SPLIT DISC® Discount Code B
402BTR/402BT- Cast iron body with epoxy coating. Flanged 402S6R/402S6- 316 stainless steel body. Flanged connection SPLIT DISC®- Cast iron body with epoxy coating and split disc
connection ANSI B16.1, class 125#. Metal to metal seating with ANSI class 150# connection. Metal to metal seating with a stain- design. Stainless disc with wafer connection ANSI 125# flange 2”-
stainless steel spring. NSF/ANSI 61 and 372 approved less steel spring. NSF/ANSI 61 and 372 approved (2”-12”). 24” EPDM, PTFE bearing. Stainless steel spring hinge pin. Lifting ring
(2”-12”). Note: For rubber seal EPDM, add “R” to end of part std. above 4".
Note: For rubber seal EPDM, add “R” to end of part number and 10% to list price. Temp Max: 180°F (80C) Pressure Max: 200 PSI
number and 10% to list price. Temp Max: 180° F (80C) SIZE 895 PART NO. WGT. LIST PRICE
Temp Max: 180° F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-18"
2" 3000 4 $ 152.00
Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24" SIZE PART NO. WGT. LIST PRICE
21/2 " 3001 6 $ 178.00
SIZE PART NO. WGT. LIST PRICE 2" 2239S6 13 $ 978.50 3" 3002 7 $ 191.00
2" 2239BT 13 $ 349.00 21/2 " 2240S6 18 $ 1,184.00 4" 3003 12 $ 246.00
21/2 " 2240BT 18 $ 422.00 3" 2241S6 23 $ 1,309.00 5" 3004 18 $ 400.00
3" 2241BT 23 $ 467.00 4" 2242S6 40 $ 1,681.00 6" 3005 20 $ 396.00
4" 2242BT 40 $ 605.00 6" 2244S6 75 $ 2,981.00 8" 3006 35 $ 595.00
5" 2243BT 51 $ 950.00 8" 2245S6 116 $ 4,832.00 10" 3007 60 $ 899.00
6" 2244BT 75 $ 1,018.00 12" 2248S6 306 $ 15,510.00 12" 3008 117 $ 1,400.00
8" 2245BT 116 $ 1,630.00 14" 3009 120 $ 2,985.00
10" 2247BT 194 $ 2,400.00 16" 3010 170 $ 4,985.00
12" 2248BT 306 $ 4,417.00 18" 3011 180 $ 5,900.00
14" 2249BT 380 $ 7,200.00 20" 3012 250 $ 7,968.00
16" 2250BT 500 $10,600.00 888R/888 Discount Code B 24" 3013 360 $12,000.00
18" 2251BT 724 $ POA
Consult Factory for larger sizes up to 48”.
20" 2252BT 890 $ POA
24" 2254BT 1220 $ POA
Note: optional 316SS seat trim available, add ST to end of part
number and 25% to list price. Consult factory. 888S6R/888S6 B
CHECK VALVES 800.833.2040
Discount Code
Note: 21/2"- 8'' are dual rated to fit between both ANSI class 125# Note: 2''- 6'' are dual rated to fit between both ANSI class 150# &
& 250# flanges, 2”, 3” & 10” Ductile Iron, ANSI 150#/300#, 300# flanges.
consult factory for other sizes. * ANSI 150# only
For viton seal add 20% to 888 list price
For viton seal add 20% to 888 list price
** 300# Flanged Dimensions
* ANSI 150#
** 300# Flanged Dimensions
11 www.flomatic.com
78 Discount Code B 78A Discount Code B 93LW Discount Code B
Made in U.S.A.
AIS (American Iron and Steel Act)
Flomatic offers domestically manufactured valve products that meet the requirements under EPA State
Revolving Fund (SRF) projects in compliance with the American Iron and Steel Act (AIS) requirements. Must be specified at time of order.
All models available with limit switch, add $600 to list price and add “LS” to end of part #.
90LS/92LS*- Cast iron body with epoxy primer. Meets AWWA 90LW/92LW*- Cast iron body with epoxy primer. Meets 90CS/92CS*- Cast iron body with epoxy primer. Meets AWWA
C508 specifications. Flanged connection ANSI B16.1, class 125, AWWA C508 specifications. Flanged connection ANSI B16.1, class C508 specifications. Flanged connection ANSI B16.1, class 125, with
with stainless steel shaft. Metal to metal standard or NITRILE 125, with stainless steel shaft. Metal to metal standard or NITRILE stainless steel shaft. Metal to metal standard or NITRILE (Buna-N) seal
(Buna-N) seal (Please add “R” to end of part number) Features (Buna-N) seal (Please add “R” to end of part number) Features (Please add “R” to end of part number) Features external lever and
external lever and spring. For vertical installation add “V” to part external lever and weight. For vertical installation add “V” to part weight. Sealed end cushion closure system for adjustable rate of valve
number. number. closure. For vertical installation add “V” to part number.
Temp Max: 180°F (80C) Temp Max: 180°F (80C) Temp Max: 180°F (80C)
Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30" Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30" Pressure Max: 200 PSI: 3"-12", 150 PSI: 14"-30"
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
2" 2704LS 46 $ 1,780.00 2" 2704LW 41 $ 1,780.00 2” 2704CS 47 $ 2,550.00
3" 2706LS 72 $ 1,920.00 3" 2706LW 71 $ 1,920.00 3" 2706CS 98 $ 3,090.00
4"* 3707LS* 119 $ 1,678.00 4"* 3707LW* 125 $ 1,678.00 4"* 3707CS* 195 $ 3,480.00
6"* 3709LS* 205 $ 2,352.00 6"* 3709LW* 224 $ 2,352.00 6"* 3709CS* 325 $ 4,023.00
8"* 3710LS* 359 $ 3,570.00 8"* 3710LW* 401 $ 3,570.00 8"* 3710CS* 455 $ 5,139.00
8"** 3710LS-18** 339 $ 3,885.00 8"** 3710LW-18** 380 $ 3,885.00 8"** 3710CS-18** 435 $ 5,598.00
10" 2711LS 537 $ 8,030.00 10" 2711LW 600 $ 8,030.00 10" 2711CS 780 $ 10,200.00
12" 2712LS 748 $ 11,220.00 12" 2712LW 843 $ 11,220.00 12" 2712CS 1073 $ 15,180.00
14" 2714LS 1165 $ 15,540.00 14" 2714LW 1323 $ 15,540.00 14" 2714CS 1495 $ 16,300.00
16" 2716LS 1645 $ 20,265.00 16" 2716LW 1875 $ 20,265.00 16" 2716CS 2119 $ 20,800.00
18" 2718LS 1860 $ 28,665.00 18" 2718LW 2110 $ 28,665.00 18" 2718CS 2386 $ 28,800.00
20" 2720LS 2495 $ 33,915.00 20" 2720LW 2841 $ 33,915.00 20" 2720CS 3211 $ 33,800.00
24" 2724LS 3440 $ POA 24" 2724LW 3927 $ POA 24" 2724CS 4440 $ POA
30" 2730LS 4975 $ POA 30" 2730LW 5693 $ POA 30" 2730CS 4975 $ POA
* 92 Series * 92 Series * 92 Series
** Short Body 18” Face to Face. ** Short Body 18” Face to Face. ** Short Body 18” Face to Face.
Stainless steel seats optional on Model 92 only, add 10% to list price.*92 series 4", 6" and 8”.
745- 45° Seat Flo-Flex®, Swing Check Valve Epoxy coated 745 WITH BACKFLUSH DEVICE- 45˚ Seat Flo-Flex®, 745 WITH POSITION INDICATOR- 45˚ Seat Flo-Flex®,
Ductile Iron Body, ANSI B16.1, class 150, ANSI/AWWA C508, with Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,
Buna-N coated Disc. class 150, ANSI/AWWA C508, with a Buna-N coated Disc. class 150, ANSI/AWWA C508, with a Buna-N coated Disc.
Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE
2" 2380BF 27 $ 748.00 3"* 2382PI 40 $ 1,093.00
2" 2380 27 $ 418.00 21/2 " 2381BF 35 $ 819.50 4"* 2383PI 68 $ 1,179.00
21/2 " 2381 35 $ 495.00 3"* 2382BF 40 $ 830.50 6" 2385PI 128 $ 1,610.00
3"* 2382 40 $ 517.00 4"* 2383BF 68 $ 964.70 8" 2386PI 235 $ 2,300.00
SWING CHECK VALVES 800.833.2040
4"* 2383 68 $ 581.00 6" 2385BF 128 $ 1,437.00 10" 2387PI 380 $ 3,436.00
6" 2385 128 $ 910.00 8" 2386BF 235 $ 2,393.00 12" 2388PI 620 $ 5,060.00
8" 2386 235 $ 1,600.00 10" 2387BF 380 $ 3,740.00 14" 2390PI 740 $ 7,245.00
10" 2387 380 $ 2,860.00 12" 2388BF 620 $ 5,269.00 16" 2391PI 1,035 $ 9,660.00
12" 2388 620 $ 3,960.00 14" 2390BF 740 $ 7,768.00 18" 2392PI 1,540 POA
14" 2390 740 $ 5,885.00 16" 2391BF 1,035 $ 10,073.00 20" 2393PI 1,835 POA
16" 2391 1,035 $ 7,897.00 18" 2392BF 1,540 POA 24" 2394PI 2,475 POA
18" 2392 1,540 $ 9,200.00 20" 2393BF 1,835 POA
20" 2393 1,835 $11,330.00 24" 2394BF 2,475 POA
24" 2394 2,475 $17,930.00
745ASC
745BFPI Discount Code B 745LS Discount Code B SURGE STOPPER® Discount Code B
W !
NE
PATENT PENDING
745 WITH POSITION INDICATOR AND BACKFLUSH 745 WITH LIMIT SWITCH (SPDT) - 45˚ Seat Flo-Flex®, 745 SURGE-STOPPER® WITH ADJUSTABLE
DEVICE- 45˚ Seat Flo-Flex®, Swing Check Valve Epoxy coated Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1, SPRING CLOSURE - 45˚ Seat Flo-Flex®, Swing Check Valve
Ductile Iron Body, ANSI B16.1, class 150, ANSI/AWWA C508, with class 150, ANSI/AWWA C508, with a Buna-N coated Disc. Epoxy coated Ductile Iron Body, ANSI B16.1, class 150,
a Buna-N coated Disc. Temp Max: 140°F (60C) Pressure Max: 250 PSI ANSI/AWWA C508, with Buna-N coated Disc. Surge-Stopper®
designed for high head, long pipe lines with field adjustable
Temp Max: 140°F (60C) Pressure Max: 250 PSI spring assisted closure.
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE Temp Max: 140°F (60C) Pressure Max: 250 PSI
3"* 2382BFPI 40 $ 1,380.00 3"* 2382LS 42 $ 1,495.00
4"* 2383BFPI 68 $ 1,472.00 4"* 2383LS 70 $ 1,610.00
SIZE PART NO. WGT. LIST PRICE
6" 2385BFPI 128 $ 2,024.00 6" 2385LS 130 $ 2,070.00
8" 2386BFPI 235 $ 3,050.00 8" 2386LS 237 $ 2,714.00 3"* 2382ASC 42 $ 1,339.00
10" 2387BFPI 380 $ 4,600.00 10" 2387LS 382 $ 4,255.00 4"* 2383ASC 70 $ 1,376.00
12" 2388BFPI 620 $ 6,440.00 12" 2388LS 622 $ 5,934.00 6" 2385ASC 130 $ 2,268.00
14" 2390BFPI 740 $ 9,315.00 14" 2390LS 742 $ 8,268.50 8" 2386ASC 237 $ 2,884.00
16" 2391BFPI 1,035 $ 11,960.00 16" 2391LS 1,037 $ 10,856.00 10" 2387ASC 382 $ 4,867.00
18" 2392BFPI 1,540 POA 18" 2392LS 1,542 POA 12" 2388ASC 622 $ 6,150.00
20" 2393BFPI 1,835 POA 20" 2393LS 1,837 POA 14" 2390ASC 742 POA
24" 2394BFPI 2,475 POA 24" 2394LS 2,477 POA 16" 2391ASC 1,037 POA
18" 2392ASC 1,542 POA
20" 2393ASC 1,837 POA
Add “S” to end of part number for Stainless Steel fasteners. 10% mark up to list price.
24" 2394ASC 2,477 POA
For 2” NPT Stainless Steel tapped plug in cover add -2P to end of part # and $150 adder.
W !
NE
AIS-Compliant
Made in U.S.A. 208B Discount Code B
OPERATION OF “THE FLOATING BALL” Horizontal installation
APPLICATIONS for Model 408FB and 508FB requires a 20’ static
TO AVOID OVERFLOW OF WATER RISING AND ALSO ALLOW AIR head on Ball Checks
EVACUATION IN FILLING OF TANKS OR PIPES (AIR-VENT). Recommended for flow
velocity of 3’ to 5’
VERTICAL HORIZONTAL per sec. For higher
MOUNTING MOUNTING
Seat up Lodging of the ball below
flow, consult factory.
the axis. The arrow shows 208B- Same as Model 208 with bosses for rail mounting. Cast
the direction in which the iron body with epoxy coating and clean-out port. Threaded female
liquid is moving. x female connection. Features NITRILE (Buna-N) “Sinking Ball”.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE
11/4 " 2141B 5 $ 90.00
2" 2142B 10.5 $ 115.00
· V-type packing
Flo-E-Centric® Plug Valve with Bare Stem Model Flo-E-Centric® Plug Valve with 2” AWWA Operating
54-B - ANSI B16.1, class 150 Ductile iron Body ASTM A536 Nut Model 54-4 - ANSI B16.1, class 150 Ductile iron Body · Ductile iron body:
65-45-12. Epoxy Powder, Buna-N Plug, V-Type Packing, Self ASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-Type
Lubricating Type 316 Stainless Steel thrust bearing. Packing, Self Lubricating Type 316 Stainless Steel thrust bearing. ASTM A536 65-45-12
Temp Max: 180°F (82C) Pressure Max: 200 PSI Temp Max: 180°F (82C) Pressure Max: 200 PSI
· Heavy duty Class 150# ANSI
FLO-E-CENTRIC® PLUG VALVES 800.833.2040
SIZE PART NO. WGT LIST PRICE SIZE PART NO. WGT LIST PRICE
B16.5 flanged ends
2" FNPT 54200004B 15 $ 235.00 2" FNPT 542000044 19 $ 261.00
3" 54000006B 40 $ 449.00 3" 540000064 45 $ 475.00
· 98% welded nickel seat
4" 54000007B 71 $ 606.00 4" 540000074 76 $ 633.00
6" 54000009B 137 $ 1,181.00 6" 540000094 142 $ 1,234.00
· Stainless steel hardware
8" 54000010B 190 $ 1,735.00 8" 540000104 195 $ 1,843.00
10" 54000011B 346 $ 2,490.00
· 100% full ported (2” to 6”)
12" 54000012B 441 $ 3,374.00
W!
NE
DI plug
Flo-E-Centric® MJ Plug - Series 5400 valves are Ductile Flo-E-Centric® Plug Valve w/Actuator - Electric actu-
iron Body Epoxy coated, Buna-N Plug, V-Type Packing, Self ated plug valve, for open/close service manual hand-
Lubricating Type 316 Stainless Steel thrust bearing. wheel override.
Temp Max: 180°F (82C) Pressure Max: 200 PSI
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT LIST PRICE
SIZE PART NO. WGT. LIST PRICE
2" FNPT 542000040A 42 $ 1,633.00
54-0 Discount Code B
6" 543000097 70 $ 1,650.00
3" 540000060A 78 $ 1,998.00
8" 543000107 146 $ 2,096.00
4" 540000070A 120 $ 3,084.00
10" 543000117 265 $ 3,066.00
6" 540000090A 188 $ 3,833.00
12" 543000127 342 $ 3,998.00
8" 540000100A 322 $ 5,383.00
14" 543000147 573 $ 6,029.00
10" 540000110A 478 $ 5,821.00
16" 543000167 661 $ 7,769.00
12" 540000120A 573 $ 6,976.00
18" 543000187 882 $ 10,735.00
20" 543000207 1370 $ 15,745.00
For modulating service add smart card option to list
24" 543000247 2271 $24,980.00
price and “M” to part #. Other options available
consult factory.
Flo-E-Centric® Plug Valve with Gear Box Model 54-
HANDLE Discount Code B See smart card option on page 16. 0 (Direct Mounted) - ANSI B16.1, class 150 Ductile iron
Body ASTM A536 65-45-12. Epoxy coated, Buna-N Plug, V-Type
Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
Temp Max: 180°F (82C) Pressure Max: 200 PSI
SIZE PART NO. WGT LIST PRICE
3" 540000060 55 $ 502.00
4" 540000070 88 $ 660.00
6" 540000090 165 $ 1,235.00
8" 540000100 256 $ 1,823.00
10" 540000110 439 $ 2,600.00
12" 540000120 533 $ 3,488.00
®
AZURE® BUTTERFLY
• Proof of design AZURE Discount Code B w/ACTUATOR Discount Code B
• NSF/ANSI 61 Approved.
• V-type packing
• Seat Buna-N MODEL 45 (Gear Operated) - Ductile iron flanged body. MODEL 45 - Electric actuated, Azure® butterfly valve,
ASTM A536 ductile iron disc with stainless type 316 steel edge. manual handwheel override for open/close service. Other
Seat, standard NBR (EPDMoptional)vulcanized.Designed to options available consult factory.
• Ductile Iron disc, AWWA standard C504,class150B. Electric/pneumatic actuation
available. SIZE PART NO. WGT. LIST PRICE
316SS edge Temp Max: 180°F (82C) Pressure Max: 200 PSI
(Ductile Iron Disc) WITH GEAR
3" 45000006A 61 $ 2,299.00
SIZE PART NO. WGT. LIST PRICE
(Ductile Iron Disc) WITH GEAR 4" 45000007A 72 $ 2,453.00
6" 45000009A 82 $ 3,144.00
3" 450000060 43 $ 535.00 8" 45000010A 165 $ 4,112.00
4" 450000070 54 $ 615.00 10" 45000011A 220 $ 4,942.00
6" 450000090 74 $ 850.00 12" 45000012A 300 $ 6,015.00
8" 450000100 134 $ 1,111.00 14" 45000014A 530 $ 7,203.00
KWIK-CLOSE® Discount Code B 10"
12"
450000110
450000120
188
261
$
$
1,600.00
2,251.00
16" 45000016A 564 $ 10,146.00
18" 45000018A 686 $ 12,699.00
14" 450000140 380 $ 3,350.00 20" 45000020A 823 POA
16" 450000160 414 $ 4,088.00 24" 45000024A 910 POA
18" 450000180 532 $ 4,500.00
20" 450000200 653 $ 4,968.00 For modulating service add smart card option to
24" 450000240 739 $ 7,776.00 list price and “M” to part #.
www.flomatic.com 16
SYLAX LUG (DI)®
Discount Code B SYLAX WAFER (DI)
®
Discount Code B
OPTIONS:
• Gear
• Shaft extensions
GEAR
SYLAX LUG (SS)®
Discount Code B SYLAX WAFER (SS)
®
Discount Code B OPERATOR Discount Code B
149G (316SS DISC) - SYLAX® Full Lug Series - Cast iron 149G (316SS DISC)- SYLAX® Wafer Style Series - Cast Gear Operators for Sylax® Butterfly Valves
body with 316 stainless steel disc. Seat Liner EPDM iron body with 316 stainless steel disc. Seat Liner EPDM Add “G” to Lever Operated part number for a gear
(Buna-N optional) with standard ISO top flange for direct (Buna-N optional) with standard ISO top flange for direct operated valve. With position indicator on top of gear box.
mounting of actuator. mounting of actuator.
Temp Max: 230°F (110°C) Pressure Max: 200 PSI Temp Max: 230˚F (110˚C) Pressure Max: 200 PSI Up to 24” available CONSULT FACTORY.
SIZE PART NO. WGT LIST PRICE LIST PRICE SIZE PART NO. WGT LIST PRICE LIST PRICE
(316SS Disc) WITH LEVER WITH GEAR (316SS Disc) WITH LEVER WITH GEAR
2" 149G037300 9 $ 187.00 $ 285.00 2" 149G011266 8 $ 141.00 $ 265.00
21/2 " 149G037302 11 $ 189.00 $ 289.00 21/2 " 149G011287 8 $ 152.00 $ 268.00
3" 149G064436 12 $ 197.00 $ 325.00 3" 149G011297 9 $ 172.00 $ 283.00
4" 149G037305SH 19 $ 260.00 $ 359.00 4" 149G011316 13 $ 208.00 $ 340.00
5" 149G037306 22 $ 314.00 $ 420.00 5" 149G011334 17 $ 263.00 $ 384.00
6" 149G037307 26 $ 400.00 $ 498.00 6" 149G011343 18 $ 299.00 $ 425.00
8" 149G037308 51 $ 710.00 $ 875.00 8" 149G016281 37 $ 550.00 $ 705.00
10" 149G037309 61 $ 937.00 $1,105.00 10" 149G013612 51 $ 925.00 $1,033.00
12" 149G037310 57 $ 1,203.00 $1,405.00 12" 149G023904 93 $1,200.00 $ 1,488.00
-
ACTUATED (DI) Discount Code B ACTUATED (SS) Discount Code B BUTTERFLY VALVE
SYLAX® FULL LUG SERIES 149GA SYLAX® FULL LUG SERIES 149GA Butterfly Valves 3"- 24"
Body: Cast Iron Seat Liner: EPDM Body: Cast Iron Seat Liner: EPDM
Disc: Epoxy Coated Ductile Iron Disc: 316 Stainless Steel AWWA C504
See page 16
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
(Ductile Iron Disc) (316SS Disc)
2"
21/2 "
149G037290A
149G037291A
33
35
$
$
1,961.00
1,967.00
2"
21/2 "
149G037300A
149G037302A
33
35
$
$
1,979.00
1,988.00
PNEUMATIC ACTUATED
3" 149G037292A 36 $ 1,979.00 3" 149G064436A 36 $ 2,005.00
4" 149G037293A 46 $ 2,070.00 4" 149G037305A 46 $ 2,096.00
5" 149G037294A 46 $ 2,098.00 5" 149G037306A 46 $ 2,131.00
6" 149G037295A 53 $ 2,610.00 6" 149G037307A 53 $ 2,647.00
8" 149G037296A 103 $ 3,325.00 8" 149G037308A 103 $ 3,396.00
10" 149G037297A 125 $ 3,979.00 10" 149G037309A 125 $ 4,110.00
12" 149G037299A 159 $ 4,775.00 12" 149G037310A 159 $ 4,925.00
CHAINWHEEL OPTION
SYLAX® WAFER STYLE SERIES 149GA SYLAX® WAFER STYLE SERIES 149GA
Body: Cast Iron Seat Liner: EPDM
Body: Cast Iron Seat Liner: EPDM Disc: 316 Stainless Steel
Disc: Epoxy Coated Ductile Iron
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
(Ductile Iron Disc) (316SS Disc)
2" 149G010894A 33 $ 1,952.00 2" 149G011266A 32 $ 1,969.00
21/2 " 149G010909A 35 $ 1,957.00 21/2 " 149G011287A 32 $ 1,976.00
3" 149G010928A 36 $ 1,970.00 3" 149G011297A 33 $ 1,991.00
4" 149G010955A 46 $ 2,059.00 4" 149G011316A 37 $ 2,083.00
5" 149G010989A 46 $ 2,084.00 5" 149G011334A 41 $ 2,114.00
Chainwheel Option
6" 149G011005A 53 $ 2,593.00 6" 149G011343A 45 $ 2,626.00 (Use with gear option)
8" 149G016257A 103 $ 3,289.00 8" 149G016281A 98 $ 3,357.00
10" 149G41010A 125 $ 3,918.00 10" 149G013612A 115 $ 4,052.00 Price on Application
12" 149G023900A 159 $ 4,715.00 12" 149G023904A 149 $ 4,848.00
60SE-ENVIRO FOOT VALVE- body with threaded female 333E-ENVIRO FOOT VALVE- body with high strength acetal 333DPE-ENVIRO FOOT VALVE- body, but with dual pur-
connection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2", poppet. Tappered stainless steel strainer, end cap, spring and fas- pose male and female threads.
3" and 4" have bronze poppets) stainless steel spring and strainer. teners. NITRILE (Buna-N) seal. Temp Max: 180°F (80C) Pressure Max: 250 PSI
Temp Max: 180°F (80C) Pressure Max: 250 PSI (1/2" size 150 PSI) Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE 11/4 "M x 1"F 4181E .5 50 $ 59.59
1/ "* 5820E* .1 100 $ 39.39
2 1" 4171E .6 50 $ 54.54 11/2"M x 11/4 "F 4182E .8 36 $ 66.66
3/ "
4 4100E .3 100 $ 39.90 11/4 " 4172E .8 36 $ 62.62
1" 4101E .8 50 $ 46.46
124P Discount Code A
11/4 "** 4102E** .8 50 $ 53.53 100MP Discount Code A
11/4 " 4103E 1 36 $ 57.57
11/2 "
W!
4104E 1.6 25 $ 88.88
2" 4105E 2.1 16 $ 137.36
NE
21/2 " 4106E 6 $ 453.49
3" 4107E 11 $ 624.18
4" 4108E 19 $ 1,039.29
*Polyethylene strainer
**Model 600S (4102E) will pass through a 2" pipe.
For high temperature: add HTE to the end of part # and 25% to list.
333SS- FOOT VALVE- All 303 Stainless steel body with high
REFER TO PAGE 35 FOR
strength acetal poppet. Tappered stainless steel strainer, end cap,
spring and fasteners. NITRILE (Buna-N) seal.
LOCAL SALES REPS BY STATE
Temp Max: 180°F (80C) Pressure Max: 250 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4171SS .6 50 $ 126.25
11/4 " 4172SS .8 36 $ 141.40
W!
NE
NE
80S6FVFD - Foot Valve- All 316 stainless steel threaded check 302BT- Cast iron body with epoxy coating, unleaded bronze disc 302S6- All 316 stainless steel body. ANSI class 150# flanged
valve body. Stainless steel spring, poppet, strainer and Buna-N and seat (2"-12"). Flanged connection ANSI B16.1, class 125#. connection. Features a EDPM seal and 304 stainless steel strainer.
seal, Viton optional. Features a Buna-N and stainless steel strainer. Temp Max: 180°F (80C) Pressure Max: 200 PSI
Temp Max: 180°F (200°C) Pressure Max: 400 PSI Temp Max: 180°F (80C)
Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24" SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE 2" 4763S6 23 $ 1,540.00
SIZE PART NO. WGT. LIST PRICE
1" 4031S6FVFD 2.1 $ 266.64 21/2 " 4768S6 30 $ 1,679.00
11/4" 4032S6FVFD 2.4 $ 355.52 2" 4763BT 23 $ 925.00 3" 4769S6 37 $ 1,763.00
11/2 " 4033S6FVFD 5.0 $ 377.74 21/2 " 4768BT 30 $ 935.00 4" 4770S6 63 $ 2,167.00
2" 4034S6FVFD 7.0 $ 569.64 3" 4769BT 37 $ 940.00 6" 4772S6 100 $ 3,602.00
3" 7938S6FVFD 15 $ 1,218.00 4" 4770BT 63 $ 1,111.00 8" 4774S6 160 $ 5,612.00
4" 7939S6FVFD 30 $ 1,833.00 5" 4771BT 80 $ 1,509.00 12" 5416S6 410 $ 16,118.00
6" 4089S6FVFD 75 $ 7,201.00 6" 4772BT 100 $ 1,694.00
8" 4090XSSFVFD 105 $ 9,236.00 8" 4774BT 160 $ 2,500.00
10" 4091XSSF 190 $ 16,110.00 10" 4775BT 260 $ 3,432.00
12" 5416BT 410 $ 4,800.00
Replaces model 80S6F
14" 5417BT 500 $ 9,200.00
16" 5418BT 650 $ 12,500.00
18" 5419BT 850 $ POA
20" 5420BT 1050 $ POA
24" 5422BT 1440 $ POA
6SE STRAINER- Unleaded bronze body with threaded female STRAINERS Discount Code C
connection. Stainless steel strainer with unleaded bronze. Stainless
steel or plastic caps.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/ " 4399E .1 10 $ 29.29
46 STRAINER- Cast iron body with epoxy coating. Flanged con-
2
3/ "
nection ANSI 125. Plastic 2"-4" stainless steel 5"-24" strainer.
4 4300E .2 100 $ 35.35
1" 4301E .6 49 $ 45.45 SIZE PART NO. WGT. LIST PRICE
11/4 "* 4302E * .6 36 $ 63.63 P: Plastic screen 2"-4"
11/2 "* 4303E * 1.2 25 $ 75.75 2" 5814P 4.7 $ 165.00
2"* 4304E * 2.4 16 $ 99.99 21/2 " 5815P 6.4 $ 167.00 STRAINER- Threaded unleaded Bronze body (3/8" – 2"), 125#
21/2 " 4305E 3 $ 264.62 3" 5816P 8.8 $ 220.00 cast iron and flanged (21/2" – 12"), 20 mesh stainless steel strain-
3" 4306E 7.2 $ 388.85 4" 5817P 13 $ 350.00
er. Furnished with clean out plug.
4" 4307E 14 $ 747.40
Pressure Max: 200 PSI (21/2" – 12") Temp Max: 180°F
* End caps on strainer are plastic. S: Stainless steel screen 5"-24" Pressure Max: 400 PSI (3/8" – 2")
5" 5821S 16 $ 447.00 SIZE PART NO. WGT. LIST PRICE
6" 5822S 21 $ 488.00
6SS STRAINER Discount Code A 8" 5824S 44 $ 728.00 3/ "
8 8711E .5 $ 32.00
10" 5825S 55 $ 1,150.00 1/ "
2 8712E .3 $ 35.00
12" 5826S 80 $ 1,589.00 3/ " 8713E 2 $ 55.00
4
14" 5827S 121 $ 2,524.00 1" 8714E 4 $ 68.00
16" 5828S 166 $ 3,225.00 11/4" 87142E 5 $ 112.00
18" 5829S 211 $ 4,043.00
11/2 " 87143E 6 $ 145.00
20" 5830S 256 $ 4,177.00
2" 87144E 9 $ 250.00
24" 5832S 346 $ 5,513.00
21/2 " 87145 15 $ 319.00
3" 87146 25 $ 360.00
4" 87147 95 $ 650.00
6" 87148 185 $ 987.00
6SS STRAINER- All 303 stainless steel body with threaded 8" 87149 299 $ 1,950.00
female connection. Stainless steel strainer with stainless steel or 10” 87150 372 $ 2,800.00
plastic caps. 12” 87151 539 $ 3,875.00
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4371SS .6 49 $ 111.10
11/4 " 4372SS .6 36 $ 131.30
21 www.flomatic.com
CHECK THESE
FEATURES...
Model C
SEVERAL
• Full port globe style
(flanged or threaded)
®
DIFFERENT
SERIES...
Model CF • Pressure Reducing Valve
• Reduced port globe style • Modulating Altitude Valve
(flanged or threaded) • Non-Modulating Altitude Valve
• Back Pressure Sustaining Valve
• Pressure Relief Valve
Model CA • Surge Arrestor Valve
• Angle body globe style • Pump Control Valve
®
PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure. Part numbers below are for standard PRESSURE REDUCING VALVE WITH CHECK - Reduces
C101 valve set at 25-125 PSI. Consult factory for other options. high upstream pressure to lower downstream pressure.
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE
SIZE 150#
C/CA LIST PRICE 150#CF FLANGED* LIST PRICE SIZE C/CA LIST PRICE C/CA LIST PRICE C/CA C/CA
C THREADED 150# C FLANGED C FLANGED SIZE THREADED CF MODEL* C FLANGED C FLANGED
150# 300# 150# 150# 300#
11/4 " C101B0B00130 $ 1,384
11//22" $2,330
$ 1,684 $ 1,783
$2,200 $2,465
$ 2,012
11/2 " C101C0B00130 $ 1,409 11/2 " C101C1B00130 $ 1,508 C101C2B00130 $1,737
2" $ 1,694 $ 2,084 $ 2,146
2" C101D0B00130 $ 1,419 2" C101D1B00130 $ 1,789 C101D2B00130 $1,871 221/12/2"" $ 2,043 $ 2,045 $ 2,152 $ 2,403
21/2" C101E0B00130 $ 1,768 CF101E1B00130 $ 1,770 21/2 " C101E1B00130 $ 1,877 C101E2B00130 $2,128 3"3" $ 2,169 $ 2,079 $ 2,195 $ 2,446
3" C101F0B00130 $ 1,894 CF101F1B00130 $ 1,804 3" C101F1B00130 $ 1,920 C101F2B00130 $2,171 4"4" $ 2,203 $ 2,744 $ 2,941
6"6" $ 3,199 $ 4,174 $ 4,493
4" CF101G1B00130 $ 1,928 4" C101G1B00130 $ 2,469 C101G2B00130 $2,666
8"8" $ 5,164 $ 6,964 $ 7,553
6" CF101J1B00130 $ 2,924 6" C101J1B00130 $ 3,899 C101J2B00130 $4,218 10" $ 7,372 $ 9,723
10" $ 10,599
8" CF101K1B00130 $ 4,739 8" C101K1B00130 $ 6,539 C101K2B00130 $7,128 12"
12” $11,645 $ 15,418 $ 16,391
10" CF101L1B00130 $ 6,947 10" C101L1B00130 $ 9,298 C101L2B00130 $10,174 6"
14” POA POA POA
12" C101M1B00130 $14,993 C101M2B00130 $15,966 8"
16” POA POA POA
12" CF101M1B00130 $11,220
10"
18” POA POA POA
14" CF101N1B00130 POA 14" C101N1B00130 POA C101N2B00130 POA
12"
20” POA POA POA
16" CF101O1B00130 POA 16" C101O1B00130 POA C101O2B00130 POA
* Reduced cavitation configuration.
18" CF101P1B00130 POA 18" C101P1B00130 POA C101P2B00130 POA
CONTROL VALVES 800.833.2040
20" CF101Q1B00130 POA 20" C101Q1B00130 POA C101Q2B00130 POA New NSF/ANSI 61
* Reduced cavitation configuration. Certified Valves
MODULATING ALTITUDE VALVE - Single acting level BACK PRESSURE SUSTAINING VALVE - Sustains a
control with modulation for final filling of storage tanks. minimum upstream pressure to prevent overdrafting the supply.
C/CA C/CA
SIZE THREADED CF MODEL* C/CA C/CA
SIZE THREADED CF MODEL* C FLANGED C FLANGED
150# C FLANGED C FLANGED
150# 300# 150# 150# 300#
NON-MODULATING ALTITUDE VALVE - Single Acting. 11/4" $1,451
11//22" $2,330
$ 3,493 $2,200
$ 3,633 $2,465
$ 3,863 Level control of storage tanks, reservoirs, and basins. 11/2 " $1,460 $ 1,718 $ 1,772
2" $ 3,849 $ 3,941 $ 4,217 2" $1,494 $ 1,749 $ 1,831
221/12/2"" $ 4,169 $ 3,917 $ 4,364 $ 4,669 21/2 " $1,857 $ 1,830 $ 1,987 $ 2,121
3"3" $ 4,521 $ 4,052 $ 4,416 $ 4,617 SIZE THREADED C/CA
C/CA C/CA
C/CA 3" $1,919 $ 2,036 $ 2,146 $ 2,245
4"4" $ 4,777 $ 5,169 $ 5,529 SIZE THREADED CF MODEL*
CF MODEL* C CFLANGED
FLANGED CC FLANGED
FLANGED
150# 150# 300# 4" $ 2,252 $ 2,898 $ 3,090
6"6" $ 5,375 $ 6,396 $ 6,844 150# 150# 300# 6" $ 3,134 $ 4,263 $ 4,580
8"8" $ 6,873 $ 9,195 $ 9,840 11/2 " $ 3,576 $ 3,835 $ 3,987 8" $ 4,925 $ 6,973 $ 7,558
10"
10" $ 9,286 $ 10,145 $ 10,854 2" $ 3,942 $ 4,036 $ 4,197 10 $ 7,246 $ 9,635 $ 10,488
12"
12” $14,092 $ 15,424 $ 16,503 21/2 " $ 4,269 $ 4,012 $ 4,469 $ 4,646 12" $ 12,094 $ 14,945 $ 15,554
6"
14” POA POA POA 3" $ 4,630 $ 4,151 $ 4,524 $ 4,703 14" POA POA POA
8"
16” POA POA POA 4" $ 4,892 $ 5,292 $ 5,498 16” POA POA POA
1"
18” POA POA POA 6" $ 5,504 $ 6,551 $ 6,809 18" POA POA POA
12"
20” POA POA POA 8" $ 7,039 $ 9,418 $ 9,789 20" POA POA POA
* Reduced cavitation configuration. 10" $ 9,510 $10,390 $10,800
* Reduced cavitation configuration.
12" $ 14,430 $15,975 $16,423
14" POA POA POA
16" POA POA POA
18" POA POA POA
20" POA POA POA
* Reduced cavitation configuration.
Pump Control Valve Modulating With Dual Power PILOT OPERATED FLOAT VALVE - For level control of storage
4 Test Cocks Standard Chamber- Eliminates pump station pressure surges during start up tanks, reservoirs, or basins.
and shut down.
C/CA C/CA
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED
5 All SS-Fasteners Standard C/CA C/CA 150# 300#
SIZE CF FLANGED C FLANGED C FLANGED
150# 150# 300# 11/4" $1,720
3" $ 5,049 $ 5,454 $ 5,900 11/2 " $1,720 $ 1,855 $ 2,072
6 Jack Screws Standard 4" $ 5,669 $ 5,925 $ 6,644 2" $1,750 $ 2,121 $ 2,199
6" $ 6,824 $ 7,623 $ 8,087 21/2 " $2,090 $ 2,102 $ 2,204 $ 2,354
8" $ 8,414 $10,485 $11,110 3" $2,127 $ 2,137 $ 2,245 $ 2,436
7 Indicator Rod Standard 6” and up 10" $13,474 $16,146 $18,005 4" $ 2,251 $ 2,910 $ 3,096
12" $20,470 $22,828 $24,383 6" $ 3,198 $ 4,112 $ 4,412
14" POA POA POA 8" $ 4,907 $ 6,601 $ 7,158
16" POA POA POA 10" $ 6,987 $ 9,222 $10,032
8 Air Bleed Valve Standard 18" POA POA POA 12" $11,653 $14,887 $15,496
20" POA POA POA 14" POA POA POA
16" POA POA POA
* Reduced cavitation configuration.
9 Low Headloss 18"
20"
POA
POA
POA
POA
POA
POA
Made in * Reduced cavitation configuration.
www.flomatic.com 24
C705/CF705 Discount Code B C801/CA801 Discount Code B C901/CA901 Discount Code B
SOLENOID CONTROL VALVE - Remote actuation for valve FLOW CONTROL VALVE - Maintains a pre-set maximum
position. Specify N.O. (normally open C802); N.C. (normally flow rate regardless of changing line pressures.
NON-MODULATING PILOT OPERATED FLOAT VALVE - closed C801). .
For level control of storage tanks, reservoirs, or basins. C/CA C/CA
C/CA C/CA SIZE CF FLANGED* C FLANGED C FLANGED
C/CA C/CA SIZE C THREADED CF FLANGED* C FLANGED C FLANGED 150# 150# 300#
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED 150# 150# 300#
2" $ 2,285 $ 2,344
11/4" $2,171 150# 150# 300#
11/4" $1,720 21/2 " $ 2,563 $ 3,204 $ 3,419
11/2" $2,266 $ 2,396 $ 2,612
11/2" $1,720 $ 1,855 $ 2,072 3" $ 2,602 $ 3,311 $ 3,436
2" $2,287 $ 2,662 $ 2,739
2" $1,750 $ 2,121 $ 2,199 4" $ 2,869 $ 3,953 $ 4,139
21/2 " $2,525 $ 2,643 $ 2,745 $ 2,895
21/2 " $2,090 $ 2,102 $ 2,204 $ 2,354 6" $ 4,230 $ 5,283 $ 5,584
3" $ 2,678 $ 2,786 $ 2,977
3" $2,109 $ 2,137 $ 2,245 $ 2,436 8" $ 6,095 $ 7,971 $ 8,527
4" $ 2,986 $ 3,428 $ 3,629
4" $ 2,251 $ 2,910 $ 3,096 10" $ 7,939 $10,988 $ 11,801
6" $ 3,739 $ 4,653 $ 4,953
6" $ 3,198 $ 4,112 $ 4,412 12" $12,614 $ 16,155 $ 16,765
8" $ 5,447 $ 7,142 $ 7,699
8" $ 4,907 $ 6,601 $ 7,158 14" POA POA POA
10" $ 7,527 $ 9,763 $10,572
10" $ 6,987 $ 9,222 $ 10,032 16" POA POA POA
12" $ 12,194 $15,428 $16,037
12" $11,653 $14,887 $ 15,496 18" POA POA POA
14" POA POA POA
14" POA POA POA 20" POA POA POA
16" POA POA POA
16" POA POA POA
18" POA POA POA * Reduced cavitation configuration.
18" POA POA POA
20" POA POA POA
20" POA POA POA
6
* Reduced cavitation configuration.
* Reduced cavitation configuration.
CONTROL VALVES 800.833.2040
New NSF/ANSI 61
Certified Valves
C1001/CA1001 Discount Code B PRESSURE GAUGES Discount Code B 316SS BALL VALVE Discount Code B
HYDRAULIC CHECK VALVE - Closes to prevent flow reversal. PRESSURE GAUGES - 2.5 inch dial, 1/4" MPT bottom 316SS BALL VALVE - Full Port, FNPT connection, drilled and
Adjustable opening & closing speed controls. connection, unleaded. 1.5% accuracy Full Scale. 304SS case liquid tapped for 2 bolt mounting pad, SS locking handle.
glycerine filled bronze tube & connection. Temp Max: 400° F Pressure Max: 1000 PSI
C/CA C/CA
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED RANGE PART NUMBER LIST PRICE
150# 150# 300# 0-100 PSI 2-PG25-100G $21.00 SIZE PART NUMBER LIST PRICE
1/ " SSBV1000-02 $ 23.00
0-200 PSI 2-PG25-200G $21.00 4
11/2 " $1,244 $ 1,315 $ 1,531 3/ "
0-300 PSI 2-PG25-300G $21.00 8 SSBV1000-03 $ 23.00
2" $1,319 $ 1,580 $ 1,658 1/ "
0-400 PSI 2-PG25-400G $21.00 2 SSBV1000-05 $ 28.00
21/2 " $1,599 $ 1,561 $ 1,709 $ 1,941 3/ "
4 SSBV1000-07 $ 38.00
3" $1,696 $ 1,707 $ 1,801 $ 2,032
1" SSBV1000-10 $ 58.00
4" $ 1,829 $ 2,347 $ 2,532
11/4" SSBV1000-12 $ 87.00
6" $ 2,842 $ 3,571 $ 3,871
11/2 " SSBV1000-15 $ 125.00
8" $ 4,671 $ 6,408 $ 6,965
2" SSBV1000-20 $ 180.00
10" $ 6,896 $ 8,681 $ 9,491
12" $ 11,890 $ 14,512 $15,122
14" POA POA POA
16" POA POA POA
18"
20"
POA
POA
POA
POA
POA
POA
VISIT WEBSITE AT WWW.FLOMATIC.COM
* Reduced cavitation configuration. FOR CONTROL VALVE PRICE LIST
25 www.flomatic.com
High Quality Valves Built to Last...
PRP Discount Code B MINI BALL VALVE Discount Code B FC4 Discount Code B
26
www.flomatic.com High Quality Valves Built to Last...
SIZING GUIDE for PILOT OPERATED VALVES
In order to insure pressure control and avoid excessive noise and maintenance expense, extreme care must
be taken when sizing the throttling valve for a specific application. Although both pressure conditions and flow
(velocity) are contributing factors, field experience has determined that flow rate is the most critical factor and
that proper valve sizing can be attained through consideration of the flow rate alone.
The maximum flow rates in tables below for Model C (full ported valves) are based on a velocity of 15 feet per
second, feet/second or (4.6 meter per second). The throttling valve is capable of handling larger flows for short-
er periods of time; however, the increase in maximum flow should be limited to 25% of the above values.
Minimum flow rates are based on 0.5 feet/second flow rate (0.15 meter per second). Valve should be selected to
be opened between 20-30% for best efficiencies and service life. The flow values for Model CF (Reduce ported
valves) in the table below are less as they have smaller valve orifice or seat areas.
The tables below indicate the desired throttling valve size (inches) for designated maximum and minimum flow
rates in gallons per minute (GPM):
Valve Body
Flow 11⁄2” 2” 21⁄2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 30” 36”
Type (Inch)
Model C Min 2.5 4 7 11 20 40 80 120 180 240 300 400 500 700 1000 –
Full Ported Max 90 150 230 340 600 1,300 2,400 3,700 5,200 7,200 8,500 12,000 14,000 21,000 32,000 –
Model CF Min _ _ _ 7 11 20 40 80 120 180 240 300 400 500 700 1000
Reduced
Ported Max _ _ _ 230 340 600 1,300 2,400 3,700 5,200 7,200 9,500 12,000 14,000 21,000 32,000
Model CI Min – 2 2 2 6 8 25 – – – – – – – – –
Diaphragm Max – 110 132 132 264 1020 1180 – – – – – – – – –
CONTROL VALVE 800.833.2040
280
220
200
Inlet Pressure (psi) Up Stream
180
160 OK ZONE
140 Recommended Outlet Pressure
Operating ZONE
120 For Automatic Pressure Regulating Valves (ACV)
100
Rule of Thumb:
80 Inlet Vs. Outlet = Max 3: 1
60
Outlet Pressure (PSIG) į
20
0
0 25 50 75 100 125 150
Outlet Pressure (psi) Down Stream
ZZZIORPDWLFFRP
Part numbers are for 15 - 75 PSI range SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
1/ " C150099E 2.2 $140.00 1/ " C150099ET 2.2 $109.00
SIZE PART NO. WGT. LIST PRICE 2 2
3/ " C150000E 2.2 $142.00 3/ " C150000ET 2.2 $115.00
4 4
11/4 " C150002EHF 5.2 $775.00
1" C150001E 3.5 $175.00 1" C150001ET 3.5 $150.00
11/4 "* C150002E* 5.2 $331.00
Part numbers are for 15 - 150 PSI range Part numbers are for 15 - 150 PSI range
11/2 " C150003E 15 $858.00
SIZE PART NO. WGT. LIST PRICE 2" C150004E 15 $925.00 SIZE PART NO. WGT. LIST PRICE
11/4 " C150102EHF 5.2 $775.00 1/ " C150199ET 2.2 $109.00
Part numbers are for 15 - 150 PSI range 2
3/ " C150100ET 2.2 $115.00
See 11/2" & 2" sizes C150E. 4
SIZE PART NO. WGT. LIST PRICE 1" C150101ET 3.5 $150.00
1/ " C150199E 2.2 $140.00
2
3/ " C150100E 2.2 $142.00
4
1" C150101E 3.5 $175.00
11/4 "* C150102E* 5.2 $331.00
11/2 " C150103E 15 $858.00
2" C150104E 15 $925.00
Product Specifications
• Connection: NPT (Male/Female),or Sweat (see product option chart below) • Max Pressure: 400 PSI (27 bar) • Max Temperature: 1800F (800C)
• Pressure Regulating Setting: Factory set at 50 psi • Standard Spring Adjustment range see part number chart
DIRECT ACTING CONSTANT PRESSURE PUMP DIRECT ACTING CONSTANT PRESSURE PUMP CONSTANT PRESSURE PUMP CONTROL- Reduces rapid
CONTROL VALVE- Reduces rapid pump cycling and maintains a CONTROL VALVE- Dual purpose threads, reduces rapid pump pump cycle with field adjustable by-pass and maintains a pre-set
pre-set operating pressure for wells. Threaded female x female cycling and maintains a pre-set operating pressure for wells. 1" operating downstream pressure. Flow 1-5200 GPM depending on
connection. Features a low lead alloy body & composite bell threaded female I.D. x 11/4" male O.D. on inlet and outlet size. For use with domestic water well, municipal water systems,
housing, Nylon reinforced Buna-N diaphragm. Supplied with two connections. Features a low lead alloy body & composite bell industrial water system, irrigation and agriculture.
FNPT tailpiece and union nuts. housing, Nylon reinforced Buna-N diaphragm.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 250 PSI
Factory set at 50 PSI Factory set at 50 PSI Factory set at 60 PSI
SIZE PART NO. SPRING RANGE LIST PRICE SIZE PART NO. SPRING RANGE LIST PRICE SIZE PART NO. LIST PRICE PART NO. LIST PRICE
3/ " 15 - 75 PSI
4 C152000E $220.00
$177.65 1"F & 11/4" M C152001ET 15 - 75 PSI $250.00 THREADED FLANGED 150#
1" C152001E 15 - 75 PSI $265.00
$177.92 11/4" CN1010B $ 2,156
1 1/4"* C152002E 15 - 75 PSI $465.00
$ 209.63 11/2 " CN1010C $ 2,196 CN1011C $ 1,650
11/2 " C152003E 15 - 75 PSI $ 209.6
$965.00
$389.56 SIZE PART NO. SPRING RANGE LIST PRICE 2" CN1010D $ 2,213 CN1011D $ 1,870
2" C152003E
C152004E 15 - 75 PSI$389.5$6
$1,100.00 1"F & 11/4" M C152101ET 15 - 150 PSI $250.00 21/2 " CN1010E $ 2,757 CN1011E $ 2,195
3" CN1010F $ 2,800 CN1011F $ 2,200
SIZE PART NO. SPRING RANGE LIST PRICE
3/ "
4" CN1011G $ 3,020
4 C152100E $177.65
15 - 150 PSI $220.00 6" CN1011J $ 4,730
1" C152101E 15 - 150 PSI $177.92
$265.00 CYCLE GARD ® IV 8" CN1011K $ 8,010
1 1/4"*
11/2 "
C152102E 15 - 150 PSI $ 209.63
$465.00 CB152E Discount Code A NOTE: NPT VALVES RATED TO 400 PSI
C152103E 15 - 150 PSI $$389.56
209.6
$965.00
2" C152104E 15$389.56
- 150 PSI $1,100.00
®
800.833.2040
COMPACT CONSTANT PRESSURE PUMP PRESSURE- BOOSTER-IT WATER SYSTEM PUMP CONTROL Constant Pressure Pump Control Valve- Reduces rapid
Reduces rapid pump cycling and maintains a pre-set operating VALVE- Designed for well water pumping systems, booster pump cycling and maintains a preset system operating pressure
pressure for wells. Threaded female I.D.x male O.D. on inlet and systems, and pump irrigation pumping systems. Valve body is independent from low or high flow conditions. Valve body is all
outlet connections. Features a unleaded alloy body & cover, Nylon cast from an unleaded bronze alloy with two 1/4" tapped holes on 316 stainless steel female NPT connection. Supports a hanging
reinforced Buna-N diaphragm. 1” NPT Female connection x 11/4" tank side for pressure switch and gauge. load up to 3,400 lbs. and fits in 4” well casing. 1” NPT Female
male NPT. connection x 11/4" male NPT, flow rates for 1-25 GPM, 11/4" 2-50
Temp Max: 180°F (80C) Pressure Max: 175 PSI
GPM.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
Max Flow 25 GPM Factory set at 60 PSI Temp Max: 180°F Pressure Max: 400 PSI
1" C154101 1.3 49 $ 85.00 Factory set at 50 PSI
SIZE PART # SPRING RANGE LIST PRICE 11/4 " C154102 1.6 36 $ 108.00
1” C3100E 35 - 65 PSI $ 265.00 11/2 " C154103 2.5 25 $ 150.00 For 40 PSI add A to end of part number or 60 PSI add B
1”* C3100EB* 35 - 65 PSI $ 310.00 2" C154104 3.1 16 $ 165.00
*With (2) 1/4” Tappings SIZE PART # WGT. LIST PRICE
®
Note: BOOSTER-IT requires a safety pressure release valve, not 1”F x 11/4 "M* C153002S6 3 $281.00
available from Flomatic Valves. 11/4 "F C153003S6 4.3 $425.00
Valves are painted with TNEMEC red. Consult factory for fusion bonded epoxy coated option.
CONSULT FACTORY for full line of sizes available. 3" 3" 6622 85 $ 2,040.00
4" 4" 6623 120 $ 2,856.00
For unit with backflush attachment, add “BF” to end of part number and 6" 6" 6624 210 $ 5,278.00
add list price. See Backflush on this page.
CONSULT FACTORY for full line of sizes available.
For 316SS trim, add ST to the end of the part # and 20% to the list price. For unit with backflush attachment, add “BF” to end of part number and
add list price. See Backflush on this page.
SEWAIR-DUAL®- Cast iron body, 303 stainless steel trim. SEWAIR-COMBO®- Cast iron body, 303 stainless steel trim. BACKFLUSH- Fabric reinforced NITRILE (Buna-N) hose with
NITRILE (Buna-N) seat. Provides protection of both small and NITRILE (Buna-N) seat. Provides same protection as Sewair-Dual®, bronze shut off valves and galvanized quick disconnects. Designed
large orifices. Two body construction. but combines into one body. for pressure backflush Sewair models.
Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI Temp Max: 150°F (65C) Pressure Max: 175 PSI INLET PART NO. WGT. LIST PRICE
INLET OUTLET PART NO. WGT. LIST PRICE INLET OUTLET PART NO. WGT. LIST PRICE 2" BF2 12 $ 445.00
3" BF3 19 $ 725.00
2" 1" 6640 120 $ 2,999.00 2" 1" 6650 80 $ 1,716.00
2" 2" 6641 150 $ 3,419.00 2" 2" 6651 110 $ 2,572.00 CONSULT FACTORY for full line of sizes available.
CONSULT FACTORY for full line of sizes available. 3" 3" 6652 145 $ 3,689.00
CONSULT FACTORY for full line of sizes available.
For unit with backflush attachment, add “BF” to end of part number and
add list price. See Backflush on this page. For unit with backflush attachment, add “BF” to end of part number and
add list price. See Backflush on this page.
Valves are painted with TNEMEC red. Consulty factory for fusion bonded epoxy coated option.
ATMOSPHERIC VACUUM BREAKER- Designed to prevent UNLEADED DUAL CHECK VALVE- Brass body with single HOSE CONNECTION VACUUM BREAKERS-
back-siphonage. Not for potable water. union. Designed to prevent back-siphonage or backflow of water, with
Temp Max: 180°F (80C) Pressure Max: 175 PSI vandal resistant features. Not for potable water.
Temp Max: 180°F (80C) Pressure Max: 125 PSI Complies with ASSE 1024
Complies with ASSE 1001 Temp Max: 180°F (80C) Pressure Max: 125 PSI
SIZE PART NO. WGT. LIST PRICE Complies with ASSE 1011
SIZE PART NO. WGT. LIST PRICE 1/ " GF8089E 2 $ 69.00
2
1/ "
2 GF3599 1 $ 47.80 3/ " SIZE PART NO. WGT. LIST PRICE
4 GF8080E 2 $ 71.00
3/ " 3/ " GF800E .21 $ 17.00
4 GF3500 2 $ 57.00 1" GF8081E 2 $ 85.00 4
BACKFLOW PREVENTERS
1” GF3501 2 $ 77.00
Add “FC” to end of part number for copper sweat connection.
11/4" GF3502 3 $ 194.00 Note: Consult factory for additional connection configurations.
11/2" GF3503 4 $ 231.00
2” GF3504 6 $ 314.00
GATE VALVES
FLANGED- Resilient wedge gate valves which meet revision of PUSH-ON- Resilient wedge gate valves which meet revision of AWWA MECHANICAL JOINT- Resilient wedge gate valves which meet
AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125. C515 standard, with stainless steel stem. Ring-type (push-on PVC pipe). revision of AWWA C515 standard, with stainless steel stem.
ANSI B16.1, class 125, MJ flange.
Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI
Temp Max: 140°F (60C) Pressure Max: 250 PSI
SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE 2" 8560RT 28 $ 247.00 SIZE PART NO. WGT. LIST PRICE
21/2" 8561 38 $ 280.00 21/2" 8561RT 42 $ 270.00 2" 8560MJ 28 $ 280.00
3" 8562 56 $ 337.00 3" 8562RT 44 $ 339.00 3" 8562MJ 44 $ 445.00
4" 8563 78 $ 473.00 4" 8563RT 69 $ 450.00 4" 8563MJ 69 $ 568.00
6" 8564 138 $ 790.00 6" 8564RT 119 $ 825.00 6" 8564MJ 119 $ 1,014.00
800.833.2040
8" 8565 214 $ 1,289.00 8" 8565RT 203 $ 1,300.00 8" 8565MJ 203 $ 1,639.00
10" 8566 360 $ 1,798.00 10" 8566RT 278 $ 2,212.00 10" 8566MJ 278 $ 2,200.00
12" 8567 531 $ 2,727.00 12" 8567RT 421 $ 3,325.00 12" 8567MJ 421 $ 3,324.00
14" 8568 547 $ 4,990.00 16" 8569MJ 656 $ 4,650.00
16" 8569 719 $ 6,090.00
Standard 2” operating nut, for hand wheel on all C515 Gate Valves. Add “HW” to the end of the part number and add 15 % to list.
OUTSIDE SCREW & YOKE- Resilient wedge gate valves FLANGED- Resilient wedge gate valves which meet revision of THREADED- Resilient wedge valve which meet AWWA 515 stan-
which meet revision of AWWA C509 standard with bronze stem AWWA C509 standard with bronze stem. ANSI B16.1, class 125. dard with SS stem with NPT connections.
and are UL/FM listed. ANSI B16.1, class 125. Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI
Temp Max: 140°F (60C) Pressure Max: 175 PSI
Tapped & plugged SIZE PART NO. WGT. LIST PRICE
Tapped & plugged 2" 8560NPT 20 $ 230.00
SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE 3" 8562NPT 32 $ 365.00
21/2" 8461 51 $ 680.00
4" 8563NPT 47 $ 489.00
21/2" 84610SY 55 $ 1,168.00 3" 8462 67 $ 800.00
6" 8564NPT 85 $ 847.00
3" 84620SY 74 $ 1,400.00 4" 8463 88 $ 875.00
4" 84630SY 103 $ 1,600.00 6" 8464 138 $ 1,198.00
6" 84640SY 158 $ 2,600.00 8" 8465 214 $ 1,844.00
8" 84650SY 240 $ 3,750.00 10" 8466 360 $ 2,636.00
10" 84660SY 392 $ 5,600.00 12" 8467 531 $ 3,200.00
All gate valves standard open left. Consult factory for right hand opening.
www.watersystemscouncil.org
www.flomatic.com 34
FLOMATIC SALES REPS
STATE DOMESTIC EMAIL INDUSTRIAL EMAIL MUNICIPAL EMAIL
WATER SYSTEMS
Alabama H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net
Alaska Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Arizona Desert Pacific Marketing pat@dpmreps.com Desert Pacific Marketing pat@dpmreps.com Desert Pacific Marketing pat@dpmreps.com
Arkansas DJC Sales sales@dcsalesco.com Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com
California Desert Pacific Marketing pat@dpmreps.com Desert Pacific Marketing pat@dpmreps.com Desert Pacific Marketing pat@dpmreps.com
Colorado Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com
Connecticut Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Delaware Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
D.C Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Florida Welty Inc dgwelte@gmail.com L.J. Ruffin Larry@ruffincompanies.com L.J. Ruffin Larry@ruffincompanies.com
Georgia H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net
Hawaii Hawaii Engineering Services info@hiengineering.com Hawaii Engineering Services info@hiengineering.com Hawaii Engineering Services info@hiengineering.com
Idaho Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Illinois - North Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com
- South GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Indiana Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com
Iowa GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Kansas GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Kentucky Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com Watermark Engineered bboyer@watermarkeps.com
Louisiana DJC Sales sales@dcsalesco.com DJC Sales sales@dcsalesco.com TLP Solutions inquiries@tlpsolutions.net
Maine Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Maryland Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Massachusetts Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Michigan Herder Sales rherder@herdersales.com RS Controls rscontrols@rscontrols.com RS Controls rscontrols@rscontrols.com
Minnesota Rep Rite Burk bcutter@repriteburk.com Rep Rite Burk bcutter@repriteburk.com Rep Rite Burk bcutter@repriteburk.com
Mississippi Cameron Sales tmcameron1970@gmail.com Cameron Sales tmcameron1970@gmail.com Cameron Sales tmcameron1970@gmail.com
Missouri - West GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
- East Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com Flomatic flomatic@flomatic.com
Montana Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Nebraska GeoStarr Marketing rick@geostarr.com GeoStarr Marketing rick@geostarr.com Flomatic flomatic@flomatic.com
Nevada Desert Pacific Marketing pat@dpmreps.com Desert Pacific Marketing pat@dpmreps.com Desert Pacific Marketing pat@dpmreps.com
New Hampshire Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
New Jersey - North Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com
- South Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
New Mexico Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com
New York Group One groupone_ne@yahoo.com Group One groupone_ne@yahoo.com Flomatic flomatic@flomatic.com
- NYC & Long Island Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com Advanced Hydronics sales@ahreps.com
North Carolina Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com
North Dakota Rep Rite Burk jnelson@repriteburk.com Rep Rite Burk jnelson@repriteburk.com Rep Rite Burk jnelson@repriteburk.com
Ohio - North WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com Daman Superior rstummer@damansuperior.com
- South WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com
Oklahoma DJC Sales sales@dcsalesco.com DJC Sales sales@dcsalesco.com TLP Solutions inquiries@tlpsolutions.net
Oregon Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Pennsylvania - West WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com WYNN Enterprises, LLC wynnl@wynnenterprisellc.com
- East Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Rhode Island Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
South Carolina Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com Lewis Marketing glenn@lewismarketinginc.com
South Dakota Rep Rite Burk apcutter@repriteburk.com Rep Rite Burk apcutter@repriteburk.com Rep Rite Burk apcutter@repriteburk.com
Tennessee H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net H2O Reps gregh2orep@bellsouth.net
Texas DJC Sales sales@dcsalesco.com DJC Sales sales@dcsalesco.com TLP Solutions inquiries@tlpsolutions.net
Utah Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
Vermont Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com Harmon & Co greg.harmonco@gmail.com
Virginia Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net Hasco Sales margo@hascosales.net
Washington Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com Pacific NW Sales pnws@msn.com
West Virginia WYNN Enterprises wynnl@wynnenterprisellc.com WYNN Enterprises wynnl@wynnenterprisellc.com WYNN Enterprises wynnl@wynnenterprisellc.com
Wisconsin Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com Rep Rite Burk jvalentine@repriteburk.com
Wyoming Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com Maples Sales & Service gmaples@maplesales.com
CANADA
Alberta Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com
British Columbia Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com Fluid Agency’s fluidagencys1@gmail.com
Manitoba Quadra Sales john@quadrasales.ca Quadra Sales john@quadrasales.ca Quadra Sales john@quadrasales.ca
NS, NB, PE, NFLD Partington Sales partington@earthlink.ca Partington Sales partington@earthlink.ca Partington Sales partington@earthlink.ca
Quebec Nimatec nimatec@nimatec.com Nimatec nimatec@nimatec.com Nimatec nimatec@nimatec.com
Saskatchewan Quadra Sales john@quadrasales.ca Quadra Sales john@quadrasales.ca Quadra Sales john@quadrasales.ca
FOR LISTING OF WORLDWIDE FLOMATIC SALES REP, VISIT OUR WEBPAGE: www.flomatic.com
35
8 WAYS YOU CAN REACH US...
1. SALES & ORDER DESK 800-833-2040 Press 2 We love to help with new orders and inquiries.
2. TECH SUPPORT 800-833-2040 Press 4 Our engineers are on stand-by for application/product support.
CONDITIONS OF SALE
3. MARKETING DEPT. 800-833-2040 Press 3 Use this line to reach the sales & marketing group.
4. FAX ORDERS 800-314-3155 The fastest and easiest way is to fax us orders and inquiries.
518-761-9798
5. PHONE 518-761-9797 If you are out of the country or can’t get through, try this line.
6. WEB SITE www.flomatic.com This page will help you get the latest information on Flomatic.
7. E-MAIL ORDERS sales@flomatic.com This is a quick and easy way to send us a message and communicate with us.
8. U.S. Mail 15 Pruyn’s Island Drive Put it in an envelope and lick a stamp, it’s that easy.
Glens Falls, NY 12801-4424
Flomatic who we are
Follow us on:
Flomatic Conditions of Sale LIMITED FIVE (5)-YEAR WARRANTY (Enviro Check® and Enviro Foot
TERMS OF SALE Valves) Flomatic warrants that its ENVIRO-CHECK® AND FOOT VALVES, in all sizes
PRICE up to 4”, are free from defects in materials and workmanship. Flomatic will
Prices at date of shipment will apply. Prices are subject to change without notice. replace, upon return authorization approval number, any ENVIRO CHECK® OR ENVI-
ACCEPTANCE RO FOOT VALVE covered by this warranty that is found to be defective within five
Orders are accepted subject to approval of credit. Delivery is subject to strikes, years from the time of sale. This warranty will be void if the product has been
accidents, or other causes beyond our control. modified in any way by the purchaser, or is subjected to unreasonable use.
ERRORS, SHORTAGES, ETC. These limited warranties extend to the original purchase from Flomatic only; they
All claims for errors, shortages, etc. must be made within 10 days of delivery. do not extend to any other purchaser or transferee.
CANCELLATIONS OF ORDERS EXCLUSION OF WARRANTIES
Orders for standard catalog products may be cancelled only if notice is received Flomatic makes no warranties, expressed or implied, with respect to its valves,
prior to the date of shipment. other than the expressed limited warranties described herein. The implied war-
RETURNS ranties of merchantability and fitness for a particular purpose are hereby dis-
Merchandise in new and saleable condition may be returned within one year after claimed by Flomatic . There are no warranties that extend beyond the description
purchase on a freight prepaid basis for credit upon return authorization approval on the face hereof.
number, subject to inspection and acceptance at our plant. A 25% restocking WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEAR
charge and original freight allowance, if any, will be deducted from the credit. FACILITY APPLICATIONS. FLOMATIC VALVES ARE NOT DESIGNED
Special order products are nonreturnable, or at manufacturer’s option. OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN
MINIMUM NET ORDER TERMS FREIGHT CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY.
$75.00 1% ten days, net 30 A&C Code $1,500 USE OF ANY OF FLOMATIC’S PRODUCTS IN ANY SUCH APPLICATION
B Code F.O.B Factory IS A MISUSE OF THESE PRODUCTS AND VOIDS ALL WARRANTIES
WARRANTIES CONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITY
AND FITNESS FOR PARTICULAR PURPOSE.
800.833.2040
LIMITED ONE (1)-YEAR WARRANTY (Complete Product Line)
Flomatic Corporation warrants that its products are free from defects in materials EXCLUSION OF INCIDENTAL
and workmanship. Flomatic will replace any valve covered by this warranty that is AND CONSEQUENTIAL DAMAGES
found to be defective within one year, unless otherwise stated below, from the time In no event shall Flomatic be liable for incidental or consequential damages,
of sale. This warranty will be void if the product has been modified in any way by including but without limitation, damages of personal injuries resulting from the
the purchaser, or is subjected to unreasonable use. negligence of Flomatic, which may arise from the manufacture, sale, purchase and
LIMITED THREE (3)- YEAR WARRANTY (Automatic Control Valves) /or use of Flomatic valves. It being intended that purchaser’s exclusive remedy is
Flomatic Corporation warrants that its Automatic Control Valves are free from limited to replacement of defective products. Some states do not allow the exclusion
defects in materials and workmanship for the period of three (3) years after ship- or limitation of incidental or consequential damages, or limitation on how long an
ment. Flomatic will repair or replace any parts or components that are found to be implied warranty lasts, so that the above limitations may not apply to you. Contact
defective within three years from the time of its shipment. Components utilized by your distributor or Flomatic at address shown if you have any questions about the
Flomatic but manufactured by others will be warranted only to the extent of the coverage of this warranty or service under this warranty. This warranty gives you
guarantee of that manufacturer. This warranty will be void if the valve or its con- specific legal rights, and you may have other rights which vary from state to state.
trols have been modified without factory authorization or if it is subjected to unusu-
al operating conditions or if it is used for an application other than which it is NOTE: Flomatic reserves the right the change and/or alter valve
intended which were not described or specified at the time of purchase. products without prior notice. Consult factory for valve specifications.
AIS-Compliant
Made in U.S.A.
Manufacturing
Plant in Upstate
New York
Flomatic can accept no responsibility for possible errors in catalogues, brochures and other printed material. Flomatic reserves the right to alter its products without notice. This
also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies.
Distribution By: