Академический Документы
Профессиональный Документы
Культура Документы
org/wiki/Lock_bumping
Lock bumping
From Wikipedia, the free encyclopedia
Contents
A typical bump key
1 History
2 Mechanics
3 Countermeasures
4 References
History
A US patent first appears in 1928 by H.R. Simpson called a 'rapping' or bump-key.[1] In the 1970s,
locksmiths in Denmark shared a technique for knocking on a lock cylinder while applying slight pressure to
the back of the lock plug. When the pins would jump inside of the cylinder, the plug would be able to slide
out freely, thus enabling the locksmith to disassemble the lock quickly.[2] The use of a bump key was not
introduced until some time later and was first recognized as a potential security problem around 2002–2003
by Klaus Noch who brought it to the attention of the German media.[3] After further examination of the
procedure, a white paper was drafted in 2005 by Barry Wels & Rop Gonggrijp of The Open Organization Of
Lockpickers (TOOOL) detailing the method and its applicability.[4] A patent exists for a lock device
following the same principle as the bump key from 1926–1928.[5]
The technique then attracted more popular attention in 2005 when a Dutch television show, Nova, broadcast
a story about the method.[6] After the method received further publicity from TOOOL presentations at
security conference talks, members of TOOOL and a Dutch consumer group, Dutch Consumentenbond,
analyzed the capability of the method on 70 different lock models and with trained and untrained users in a
2006 study.[7]
At the same time, Marc Tobias, an American security expert, began to talk publicly in the United States
about the technique and its potential security threats. In 2006, he released two further white papers
regarding the technique and its potential legal ramifications.[8][9]
Mechanics
1 of 3 14/11/2010 03:08
Lock bumping - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Lock_bumping
Countermeasures
High-quality locks may be more vulnerable to bumping unless they employ specific countermeasures. More
precise manufacturing tolerances within the cylinder make bumping easier because the mechanical
tolerances of the lock are smaller, which means there is less loss of force in other directions and mostly pins
move more freely and smoothly. Locks made of hardened steel are more vulnerable because they are less
prone to damage during the bumping process that might cause a cheaper lock to jam.
Locks having security pins (e.g. spool or mushroom pins)—even when combined with a regular tumbler
mechanism—generally make bumping somewhat more difficult but not impossible.
Because a bump key must only have the same blank profile as the lock it is made to open, restricted or
registered key profiles are not any safer from bumping. While the correct key blanks cannot be obtained
legally without permission or registration with relevant locksmith associations, regular keys can be filed
down to act as bumpkeys.
Locks that have trap pins that engage when a pin does not support them will jam a lock's cylinder. Another
countermeasure is shallow drilling, in which one or more of the pin stacks is drilled slightly shallower than
the others. If an attempt were made on a lock that has shallow drilled pin stacks, the bump key will be
2 of 3 14/11/2010 03:08
Lock bumping - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Lock_bumping
unable to bump the shallow drilled pins because they are too high for the bump key to engage.
Locks that only use programmable side bars and not top pins are bump proof. Bilock is an example of this
technology. Many bump-resistant locks are available which can not be easily opened through the lock
bumping method. Baldwin and Schlage are two brands that offer bump resistant locks [11]
Electronic locks, magnetic locks, and locks using rotating disks, such as disc tumbler locks, are inherently
invulnerable to this attack, since their mechanism does not contain springs. However, some electronic locks
feature a key backup that is susceptible to bumping.
References
1. ^ page 19 "High Security Mechanical Locks - An Encyclopaedic Reference" published by Graham W. Pulford
2007
2. ^ The Lockdown: Locked, but not secure (Part I) (http://www.engadget.com/2006/08/24/the-lockdown-locked-
but-not-secure-part-i/) . Marc Weber Tobias; August 24, 2006
3. ^ TOOOL (http://toool.nl/) (The Open Organization Of Lockpickers) website, retrieved February 12, 2007.
4. ^ White paper (http://toool.nl/images/7/75/Bumping.pdf) (pdf) on lock bumping by TOOOL. Retrieved June 22,
2009.
5. ^ http://img525.imageshack.us/img525/2736/bumpkeypatentpg1gk9.jpg
6. ^ Video (http://www.toool.nl/bumpkey-alert.wmv) (wmv) of the Nova broadcast (with English subtitles).
Retrieved February 12, 2007.
7. ^ Dutch Consumentenbond report (http://www.toool.nl/consumer-reports-nl.pdf) (pdf) on bumping locks
(translated to English). Retrieved February 12, 2007.
8. ^ A detailed technical analysis of bumping (http://www.engadget.com/videos/lockdown/bumping_040206.pdf)
(pdf) by Marc Weber Tobias. Retrieved February 12, 2007.
9. ^ Bumping of Locks: Legal issues in the United States (http://www.engadget.com/videos/lockdown
/bumping_legal_mwt.pdf) (pdf) by Marc Weber Tobias. Retrieved February 12, 2007.
10. ^ What is Lock Bumping? (http://www.kaba.com.au/News-Media/Press-Release/Lock-Bumping
/238236_238238/lock-bumping_en.html)
11. ^ Bump Resistant Locks (http://www.kaba.com.au/News-Events/News/Lock-Bumping/Bump-Resistant-
Locks/238240_238242/bump-resistant-locks_en.html)
Retrieved from "http://en.wikipedia.org/wiki/Lock_bumping"
Categories: Locks | Locksmithing
3 of 3 14/11/2010 03:08