Академический Документы
Профессиональный Документы
Культура Документы
Installation Instructions
Mac-Lab/CardioLab Software Version 6.5.x/6.8.x/6.9.x
Introduction
Document Use
Use the following procedure to install the HP LaserJet Pro 400 M451nw on Mac-Lab/CardioLab
versions 6.5.6 or later; Standalone Acquisitions and Network systems, including Software Only
Review workstations.
This document includes instructions for installing to a single local system and to a network.
Revision History
C 8 July 2014 Updated to include instructions for Mac-Lab/CardioLab software version 6.9.6
and higher.
Required Parts
NOTE: Contact GE Healthcare Technical Support or the hospital administrator for current
password information.
3. Click Log off and immediately hold down the Shift key.
WARNING: This system is designed to comply with the applicable IEC/EN 60601-1 series
safety standards when connected and powered as specified. Connecting
additional devices, parts or accessories that are not recommended by GE
Healthcare could lead to a reduced level of safety. Refer to the Service Manual
for equipment connection and service information. Contact GE Healthcare if
questions arise.
To reduce the risk of shock and equipment damage, use safe working
practices before servicing electrical equipment.
2. On the printer control panel, use the left and right arrow keys to navigate the menu
selections.
An asterisk (*) briefly displays on the right side of the screen to indicate the selection was
made.
The installer displays a progress bar. The Next button displays when the installer finishes.
5. Click Next.
6. Choose Directly connect to the computer using a USB cable and click Next.
8. Click Next.
9. Make sure the Set as default printer and Print a test page checkboxes are selected.
Driver Installation
1. Insert the HP LaserJet Pro M401/ M451 Driver CD (PN 2069157-001) into the DVD drive.
3. When the Found New Hardware Wizard window opens, select Install from a list or
specific location (Advanced) and click Next.
4. Click the Include this location in the search checkbox and click Browse.
5. Navigate to the CD drive, select the HP LaserJet M451 Color folder and click OK.
6. Click Next.
8. Select Install from a list or specific location (Advanced) and click Next.
9. Click the Include this location in the search checkbox and click Browse.
10. Navigate to the CD drive, select the HP LaserJet M451 Color folder and click OK.
A window displays to indicate the Hewlett-Packard HP LaserJet 400 M451 PCL6 is being
installed.
2. In the Printer and Faxes window, right-click HP LaserJet 400 M451nw PCL6 and select
Properties.
5. Click OK.
Network Installation
2. On the printer control panel, use the left and right arrow keys to navigate the menu selections.
b. Use the alphanumeric buttons to type the IP address and then press OK.
The installer displays a progress bar. The Next button displays when the installer finishes.
5. Click Next.
7. Type the printer’s IP address into the Search using an IP Address field.
9. Click Next.
10. Make sure the Set as default printer and Print a test page checkboxes are selected.
4. Click Next.
5. Select Local printer attached to this computer and uncheck the Automatically detect and
install my Plug and Play printer checkbox.
6. Click Next.
7. In the Select a Printer Port window, click the Create a new port radio button and select
Standard TCP/IP Port from the drop-down list.
8. Click Next.
9. Click Next at the Welcome to the Add Standard TCP/IP Printer Port Wizard screen.
10. Enter the IP address displayed on the printer's LCD screen into Printer Name or IP Address
field.
14. In the Install from the Disk window, click Browse and navigate to the HP LaserJet M451
Color folder on the CD.
16. In the Install Printer Software window, select the HP Universal Printing PCL6 driver.
18. In the Printer Sharing window, select Do not share this printer and click Next.
19. On the Print Test Page window, select Yes and click Next.
21. Go to Disable Printer Status Notifications on page 12 to finish the installation procedure.
3. In the HP LaserJet 400 M451 PCL6 Properties window, click the Device Settings tab.
4. Under Installable Options, click the Enabled link next to the Printer Status Notification
option.
6. Click OK.
3. Follow the onscreen prompts to download and install the latest firmware.