Академический Документы
Профессиональный Документы
Культура Документы
1. Open the battery box correctly and install the battery. Attention shall be paid to the cathode and
anode of the battery.
2. Turn the power switch on microphone to “ON”. If the power indicator lamp does not flash or
always lights, inspect whether the battery voltage is insufficient or the polarity of battery is installed
oppositely.
3. Before using wireless microphone, please extend the rod antenna and make it vertically upward,
so as to reach a better receiving effect.
4. Adjust the microphone volume knob on the audio amplifier and adjust its position according to
the sound volume when singing, so as to reach the ideal effect.
5. If you have to use wireless microphone temporarily during the singing process, you can put the
microphone switch in mute status; once using is stopped, you can turn the microphone switch in off
status. The microphone will pick up sound to amplify it and input to the horn of the audio amplifier
no matter it is in mute or off status.
6. The receiving antenna shall not get access to the metal surface, wall or other obstacle; if is too
closed to them, the performance will be reduced dramatically, influencing the receiving effect.
7. The effective using distance of wireless microphone is within 15m, please never use it beyond the
effective range in order not to affect the singing effect; when the electricity quantity of battery is the
using environment is too strong, the using distance shall be shortened accordingly.
8. To reach the best singing effect, the distance between mouth and microphone shall be 5-15CM
and the best angle is 45 degrees.
9. After the microphone is used for a very long time and lacks of electricity, the indicator lamp for
electricity insufficiency will light, lease timely change battery in order not to affect the singing effect.
10. Please never use the microphone is the same frequency point for singing within short distance
since it may cause silence or interface noise.
11. If you have purchased more than two sets of active audio amplifiers matches with wire lend to
use them together, please select the varieties in different standard frequencies. If the frequency is
identical, two sets machines can not be used until they are separated from each other for 100m, so
as to avoid mutual inference and other unnecessary troubles! Never get the machine to
VCD/CD/DVD and other equipment’s with strong interference frequency when they are used, so as
to avoid mutual interface between the same frequency and directly affecting to the normal work of
wireless receiving of microphone!
Fault phenomenon
Failing to electrify
No sound
Troubleshooting
If there is still fault after the inspection above, please contact the nearest local maintenance
department!
The product technology of our company is upgraded continuously and we will not inform of the
change of product specification and function additionally!
Carefully read operating manual to operate this unit properly and keep this manual for further
reference
TO THE CUSTOMER
Dear customer:
Thank you very much for your support and trust to buy the products of our company, in order to
make the function of the system into full play, we recommend before you use the device, carefully
read this manual to help you easy to grasp the connection method and use points, after reading,
please safekeeping for future reference.
PRODUCT FEATURES
19: Bluetooth: Press the “MODE” switch button to the Bluetooth state
After the pairing, select the music you like to play in your mobile phone
1. When the built-in battery’s charges was used up. Then please linked the power cable and press
the “CHAT” button last for three second. You can’t see everything on screen expect for battery
charges sign which is mean the battery is charging. When battery charges done it, the battery sign
will not jumped. As usual charges the full of battery need 8 hours. Taking down the power cable
when the charges had done.
2. You had better not touch the back board when the speaker is charging, because the back is hot
when charging.
3. If you long time does not use the speaker, you need to charges the full of battery.
When you need to use the built-in MP3 decoding function, first of all please put your USB on the
computer formatted to FA-T32 format, and then copy the MP3 file to the USB, as the decoding
system read the USB, it decoding playback as the generated sequence time of the MP3 song file. So
first copy into USB songs play at first, and then copy into play at later. As the user needs according to
the specific sequence of play, you can develop the sequence of copy by yourself. If the file of copied
into USB can’t be played, please check the file format whether is MP3, when you copy the MP3 file
do the best copied to the root directory of USB. Suggested that delete the unnecessary files and file
directory, so that reduce the reading error when decoding broadcast. As you in the purchase of USB
is the best choice of slightly better quality, internal decoding support
60MB/128MB/256MB/512MB/1GB/2GB/4GB/8GB Capacity. In the course of playing please far away
from the high temperature, high magnetic field and high frequency interface environment, if crash,
please shut off the power to restart and it will reset the address.
Rear Panel/MP3 Function & Operation