Академический Документы
Профессиональный Документы
Культура Документы
VOLUME II
PART C – EARTHWORK
1
For every layer of 150 mm of compacted depth based on results
of compaction trials.
At least one group of three in site density test or each 500m 2 or
fraction thereof
b) Mix
c) Water
d) Mix
2
1 – Q, Quality test for every 40 to 200 drums or fraction
thereof
c) Mix – same as Item 203
d) Compacted base course same as for Item 203
Item 206 - Portland Cement Treated Plant Mix Base Course
Amount by Cement to be added:
6 to 10 mass percent of dry soil aggregate
Test: a) Soil Aggregate – Same as for Item 203
b) Portland Cement – for every 200 bags or fraction
thereof
1 – Q, Quality Test
c) Water
1 – Q, Quality Test for PE Certificate
d) Mix – Same as for Item 204
e) Compacted Base Course
For every layer of 150 mm compacted depth
1 – D, Field Density Test for every 150 m or fraction
thereof
1 – T, Thickness determination for every 150 m, or
fraction thereof
Item 207 - Aggregate Stockpile
Test: Same as the specified Item No. of the specification
3
Item 304 - Bituminous Surface Treatment
a) Aggregate
Quantity: Using Cut back asphalt or Asphalt Cement
13.6 to 38.0 kg/m2
Using Emulsified Asphalt
13.6 to 19.04 kg/m2
Test: For every 1,500 m2 or fraction thereof
1 – Q, Quality test for (Grading, Plasticity,
abrasion, stripping and Bulk Specific Gravity)
1 – F, Fractured Face
b) Bituminous Materials
Quantity: Using cut back asphalt or asphalt cement 1.58 to
2.04 l/m2
Tests: Same as for item 301
4
Item 307 - Bituminous Plan Mix Surface Course
a) Aggregates
Tests: For every 75 m3/ 200 T or fraction thereof
1 – G, P, Grading and Plasticity
For every 1,500 m3 or fraction thereof
1 – Q, Quality test for (Grading, Plasticity, Abrasion,
Stripping and Bulk Specific Gravity)
1 – F, Fractured Face
b) Bituminous Materials
Quantity: 5.0 to 8.0 mass percent of total dry aggregates
Tests: 1 – Q, Quality test for each 40 T or fraction thereof
c) Mix
Tests: For every 75 m3/ 130 T or fraction thereof
1 – G, Grading
1 – Ext., Extraction
1 – Sty., Stability
1 – C, Laboratory Compaction
d) Hydrated Lime
Tests: For every 100 T or fraction thereof
e) Mineral Filler
Tests: For every 75 m3 or fraction thereof
1 – G & P, Grading and Plasticity (LL, PL, PI)
f) Compacted Pavement
Tests: For each full days operation D & T (Density and
Thickness at least on but not more than three
samples shall be taken
5
Tests: Same as for Item 307
d) Hydrated Lime
e) Mineral Filler
f) Compacted Pavement
Tests: Same as for Item 307
6
1 – Q, Quality test for: Grading, Bulk Specific
Gravity, Absorption and Abrasion
For every 75 m3 or fraction thereof:
1 – G, Grading test
c) Water
Tests: 1 Certificate from PE or
1 – Q, Quality test if source is
questionable
d) Joint Filler
1) Poured Joint Filler
Tests: 1 – Q, Quality test for each type of
Ingredient for each shipment.
2) Pre-molded Joint Filler
Tests: 1 – Q, quality test for each thickness
of filler for each shipment
e) Special Curing Agents
Tests: 1 – Q, Quality test for each
shipment
f) Steel Bars
Tests: For every 10,000 kgs. Or fraction
thereof for each size.
1 – Q, Quality test for bending, tension and
chemical analysis
g) Concrete
Tests: Flexural strength test or concrete
beam samples.
1 – Set consisting of 3 beam sample shall
represent a 330 m2 of pavement, 230 mm
depth or fraction thereof placed each day.
Volume of concrete shall not be more than
75 m3
h) Completed Pavement
Tests: Thickness determination by concrete
core drilling on a lot basis. Five (5) holes per
lane or five (5) holes per 500 m when per
lanes are poured concurrently.
PART F – BRIDGE CONSTRUCTION
7
b) Concrete Piles
a. Concrete
Tests: Same as for Item 405
b. Reinforcing Steel
Tests: Same as for Item 404
c. Structural Piles
Tests: 1 – Q, Quality test/mill test certificate
1 – IR, Inspection report
Item 402 - Timber Structures
a) Concrete
Tests: 1 – Q, Quality test or manufacturers certificate for each type
of materials used.
1 – IR, inspection report for each size and shipment of timer
8
1 – Q, Quality test for: Grading, Elutriation (wash),
Bulk Specific Gravity, Absorption, and Mortar
Strength
For every 75 m3 or fraction thereof
c) Course Aggregates
Quantity: Four Rounded CA For Angular CA
Class A – 0.77 0.68 m3/m3 of concrete
Class B – 0.82 0.73 m3/m3 of concrete
Class C – 0.70 0.68 m3/m3 of concrete
Class P – 0.68 0.65 m3/m3 of concrete
9
Item 408 - Steel Bridges
Tests: Same as test for item 403 & 411
Painting: 1 – Q, One 20 – L can for every 100 can or fraction thereof
1 – Q, One 4 – L can for every 100 can or fraction thereof
10
Tests: Same as for Item 505
11
Tests: Same as for Item 405, Class A
b) Pre-molded Expansion Joint Filler
Tests: Same for item 311
12
Item 611 - Tree Planting
Tests: IR
Materials Details
13
Item 712 - Structural Metal
Tests: Same as for item 403 and 408
Concrete Hollow Blocks 1-QT for every 10,000 units 6 pcs sample
14