Академический Документы
Профессиональный Документы
Культура Документы
asbestos packings in a
variety of applications. They are designed to handle a wide range of services, including chemicals, oils, steam, water, air, mild acids,
etc. Each of John Crane’s three styles of packings are manufactured to give you long-lasting service.
STYLE 1335
Services
For medium to high speed rotary shaft applications to 2250FPM.
Handles a wide variety of services: mild acids and alkalies, solvents,
water, steam, etc. For use in rotary and reciprocating pumps, as
well as valves.
STYLE 810M John Crane Style 810M is a resilient packing that reduces friction
to a minimum and is a low cost general purpose gland packing
for all rotary applications. This packing is commonly used in the
General Industry market sector, which includes mining, steel, power
generation and other general purpose applications.
Services
Ideal for boiler feed and slurry applications. This packing is
designed for economical sealing of hot and cold water, prime oils,
mild caustics, solvents, slurries and many other general applications.
Ideal where a dense and resilient packing with exceptionally long
service life, uniform density and a smooth wearing surface is
required.
1
STYLE 1340
Services
For medium to high speed rotary shaft applications to 10MPS.
Designed to cover a wide variety of services and applications.
Excellent for use in low or medium pressure pumps, as well as
valves.
STYLE 600K
The 600K is a unique packing combining style 1335 with a Expanded
Arimed Fibre. The Expanded Arimed Fibre (Kevlar) is used to re-
inforce the corners.
Services
General use, marine use (in particular for ship’s propeller-shaft
glands).
All fluids (except the most corrosive ones) – including abrasive
fluids. Suited for use in Reciprocating sludge pumps, centrifugal
and acid pumps in the mining industry.
2
STYLE C1032
Services
Valve stems or slow speed rotary shaft applications to 1000 FPM. A
soft, resilient packing for high corrosive liquids, gases, caustic alkali,
chlorine and similar media.
STYLE C1045
Style C1045 has been designed for high speed rotary services,
handling corrosive chemicals or solvents at temperatures up
to +260ºC. Through a bleaching and shrinking process prior to
braiding, all carbonaceous material has been removed and greater
dimensional stability has been attained.
Services
Valve stems or slow to medium shaft speed applications to 5mps.
For chemicals, solvents, gases and similar services where a lubricant
other than TFE is not acceptable.
3
STYLE C1050
Style C1050 is a soft braided packing which has exceptional thermal
stability. It contains PTFE dispersion on the yarns and a special heat
resistant lubricant, which is applied to the yarns before braiding.
Services
For medium to high speed rotary shaft applications to 2000 FPM.
An extremely soft and resilient packing for chemicals, corrosives,
gases and similar services.
STYLE C1056
Services
Valve and rotary equipment specifically requiring the use of a FDA
compliant material.
4
STYLE C1064
This is a unique type of packing combining K1730 and C1065. The
core of this packing is made of an aramid fibre surrounded by
C1065 with corners of K1730.
Services
Excellent in many types of paper mill applications involving
caustics, acids and other severe media. Also excellent in abrasive
applications as found in waste water treatment plants.
STYLE C1065
Services
For valve stems or centrifugal pumps handling speeds up to 15mps.
For all solvents, acids, chemicals and similar severe services.
5
STYLE C1070
John Crane Style C1070 is a general all-purpose braided graphite
encapsulated “PTFE” packing fully lubricated for dry running
service in a wide range of chemical and temperature applications
in the valve and pump industries. In addition to its resilience,
it remains dimensionally stable while displaying excellent heat
dissipating properties and extrusion resistance characteristics.
Services
Rotary, centrifugal and plunger pumps as well as valves servicing
solvents, acids, chemicals and similar services. Also used in other
types of rotating and/or static applications where chemical
resistance and heat is a factor.
STYLE 1993
John Crane Style 1993 combines the high strength of polymide with
the lubricity of graphitic PTFE to create Style 1993. Designed for the
abrasive slurry industry.
Services
Excellent in abrasive slurry applications found in the mining industry,
waste water treatment plants, power stations and general industrial
duties. This packing can also be used in paper mill applications
involving caustics, acids and other severe media. This is an extremely
flexible packing that can also be used on worn shafts.
6
The John Crane high strength polymide P84BLU packing is designed
STYLE P84BLU to handle abrasive services at high pressures and shaft speeds. This
packing is also very forgiving on pump shafts and sleeves, resulting
in significantly reduced replacement costs of wearing parts.
Services
An excellent universal packing which is suitable for general
purpose applications in most of the market segments. Because of
it’s ability to withstand abrasives and slurries without accelerating
shaft or sleeve wear, it will provide reduced maintenance costs and
downtime. It is an excellent choice for mixers, and agitators where
abrasive wear can cause maintenance problems. Other applications
include: salt water and brine pumps in the marine industry, waste
water and sludge pumps in water treatment and purification plants
as well as pulp and paper applications.
STYLE 1345 John Crane Style 1345 is designed for heavy-duty industry such as
pulp & paper, mining, waste water, asphalt, power generation etc.
This ideal interlaced braided packing offers strength, abrasion &
chemical resistance along with elevated temperature 7 pressure
capabilities, therefore extending normal packing life. Unlike aramid
materials, shaft and/or sleeve wear is greatly reduced along with
required maintenance or costly downtime.
Services
Valves, centrifugal and rotary pumps, mixers, agitators, pulpers,
stock pumps, refiners, sludge pumps, coal slurry, fly ash slurry,
condensate pumps, etc. Servicing abrasives, solvents, acids, mild
caustics & liquors, asphalt, chemical and similar services rotating,
reciprocating or static. Additional applications include salt water
and brine pumps in the marine industry and water and sludge
pumps in water treatment purification.
7
STYLE K1730
This style features a continuous filament aramid yarn, individually
lubricated with PTFE for greater lubricity, excellent heat dissipation,
lower friction and enhanced sealing over the life of the packing. A
high temperature oil lubricant is applied to facilitate smooth start
up and break-in.
Services
For rotary shaft and valve applications to 10mps, where a high
tensile strength packing is required. Ideal for sewage, mild
chemicals, mild caustics, paper mill applications and all abrasive-
type services. K1730 is also excellent in the marine industry where
salt water can erode packing leading to early equipment failure.
STYLE G57
John Crane Style G57 is a high purity graphite packing designed
for a wide range of fluids. This interlaced braided combination of
flexible graphite yarn is the natural choice for pumps and valves. It
has the unique combination of self-lubricating and heat dissipating
properties while offering an excellent resistance to extrusion.
Services
As a multipurpose packing Style G57 is used in a wide range of fluids
including most acids (except strong oxidizers) caustics, solvents,
high temperature steam, hot oils, hydrocarbons, pulp, paper stock
and water. This style is not only used in critical valve services, but is
the natural choice for rotating equipment including centrifugal and
positive displacement pumps where minimal controlled leakage is
required. G57 is the ideal single spool waterless packing solution.
The internal lubrication and tensile strength of the packing make
it the perfect plant converter.
8
STYLE G58
John Crane Style G58 is manufactured from high purity flexible
graphite yarn which is reinforced with a high strength, high
temperature, non-scoring filament. The yarn is tightly braided and
squared to provide resiliency and stuffing box conformity. This
braided flexible graphite “Crane-foil” can be used as end rings or
complete sealing rings in valve or pump applications for high or low
pressure and temperatures. Offering excellent sealability, reduced
volume loss, corrosion resistance, lubricity and heat dissipation.
Services
G58 is an excellent choice for rotating equipment including
centrifugal and positive displacement pumps in process applications.
Other applications include: exhaust seals, pulpers, digesters, mixers,
agitators, dryers and blowers.
STYLE G58I
This variation of John Crane G58 is a specially designed braided
flexible graphite “Crane-foil”, for use as end rings in conjunction
with die formed “Crane-foil” with inconel wire jacket yarn sealing
rings. Mainly used in valves, slow rotation or static applications for
high or low pressure for high or low pressures and temperatures.
Offering excellent sealability, reduced volume loss, corrosion
resistance, lubricity and heat dissipation.
Services
Extreme services such as high pressure valves, soot blowers, exhaust
seals, etc. This style is recommended for a wide range of fluids
including most acids (except strong oxidizers), caustics, solvents,
high temperature steam, gases and water.
9
STYLE 1625G
Style 1625G is a severe service packing which is ideal for the most
difficult fluid handling applications in the chemical, petrochemical
and related industries. It is impervious to the most destructive
acids, corrosives, alkalies and caustics solutions and will withstand
extreme temperatures over +343ºC in the stuffing box.
STYLE 1627
John Crane Style 1627 is a carbon/graphite braided packing
lubricated with a colloidal graphite dispersion, therefore enhancing
its thermal stability and reducing frictional heat. This highly
chemical resistant material is ideal for most uses throughout the
chemical, petrochemical, power generation and/or other related
industries. Ideal for high or low pressures and temperatures, while
maintaining adjustability, conformity, flexibility and excellent heat
dissipating characteristics.
Services
Ideal for pump services (rotary, centrifugal & reciprocating), valves,
expansion joints, mixers, dryers & blowers. Used in a large variety
media from condensate & boiler feeds to alkalies & caustics. Also
commonly used as end rings in conjunction with “Crane-foil” center
sealing rings forming a complete stem seal valve packing set.
10
STYLE 774 John Crane Style 774 is a premium grade fibre packing, designed for
a wide range of fluids at extreme temperatures, pressures and shaft
speeds. Made from 95% carbon content PAN fibres, this packing is
interlaced braided for greater density, yet, maintaining superior
flexibility. This packing also features excellent heat dissipation, self-
lubrication and high extrusion resistance to allow for both valve
and pump sealing. In pumps the benefit is high – speed capability,
in valves – pressure & temperature.
Services
As a multipurpose packing it is used in a wide range of applications
including most acids, solvents, caustics, high temperature steam,
hot oils, hydrocarbons, pulp, paper stock, soot blowers, high speed
refiners and hydropulpers, hot and cold water. This product is not
only used in the most critical valve service, but also the choice for
rotating and reciprocating equipment. Style 774 is most used as a
complete sealing set, it is very successful as a member of the John
Crane Sealing Solution program. In applications where flush free
systems are preferred, Style 774 forms an integral part.
STYLE 867
Quality marine service packing incorporating the resiliency of flax
and the exceptional properties of PTFE dispersion. The result is
a thoroughly lubricated flax packing treated with PTFE to assure
ease of installation and handling even in very large cross sections.
This combination produces a packing with low friction, high tensile
strength, resistance to sea water, oils and chemicals, yet provides
excellent shaft contact.
Services
Recommended for stern shaft tubes, rudder posts, large water reel
shafts, general water service and many industrial applications.
Recommended in the following industries: marine, mining,
municipal, general industrial, pulp and paper.
11
STYLE 894 & 894T
John Crane styles 894 & 894T packing is made from strong
absorbent cotton, which due to its ability to absorb the fluid it is
in, allows it to maintain a soft, pliable surface, making it excellent
for bronze or brass sleeves.
Style 894 is braided from long staple cotton fibres. Lubricated with
a water-resistant lubricant and externally coated with graphite.
Services
Cold or hot water, mild slurries, oil or hydrocarbons.
STYLE 888WD
Services
Door seals.
560˚ C 3 - 14 - - - -
12
Style 387I is the proven non-asbestos heir for asbestos packing Style
187I. It is recommended for high temperature, high pressure to 297
Bar applications, and complies with API Code 682 and 607. It utilizes a
proprietary yarn (exclusive in packings from John Crane) developed by
STYLE 387I NASA for dependable performance in high temperature services. Style
387I offers greater leakage control and longer service and costs far
less than specialty non-asbestos packings. It also requires less torque to
achieve effective sealing.
This packing is designed to retard pitting of 300 and 400 stainless steel
stems, and contains a special sacrificial metal that prevents electrolytic
action from taking place.
Services
This packing is excellent for stainless steel valve stems, rods and
expansion joints. For water, air steam, oil, liquid petroleum, chemicals,
corrosives and similar services.
STYLE 100AL
Style 100AL is a flexible metallic packing made by spirally wrapping
thin ribbons of soft-annealed aluminum foil loosely around a small
core of pure dry glass roving and squared to the desired size. Every
ribbon is thoroughly lubricated with high temperature oil and
graphite. All the voids and interstices form reservoirs of lubrication.
Under compression, these reservoirs furnish lubrication to the
moving parts. Many centrifugal hot oil pumps with hardened steel
shafts of 500 Brinnell and over are packed successfully with this
packing.
Services
For slow to medium speed rotary shaft applications to 8mps. High
temperature centrifugal oil charge pumps handling crude oil,
pressure distillates and lower fractions, diphenyl valves, hot oil
valves, stillnecks and similar equipment.
13
STYLE 100M Style 100M is a flexible all-metallic packing made of continuous
thin ribbons of soft babbitt foil, spirally and loosely wrapped,
crinkled and folded around a neoprene core, and squares to the
required size. Each layer of the foil is thoroughly lubricated with
oil and graphite. All the voids and interstices form reservoirs of
lubrication. Under compression, these reservoirs furnish lubrication
to the moving parts on which the packing is installed.
Services
For rotary shaft applications to 18mps. Air compressors, centrifugal
oil pumps, high pressures centrifugal water and hydraulic pumps,
fuel pumps, steam turbine shafts, boiler feed pumps, condensate
pumps and valve stems.
STYLE 124
Services
For slow to medium speed shaft and rotary applications to 8mps.
High temperature centrifugal oil charge pumps handling crude
oil, pressure distillates and lower fractions, diphenyl valves, hot
oil valves, stillnesck and similar equipment. Also recommended for
heat transfer fluids and HF acid.
14
15
16