Академический Документы
Профессиональный Документы
Культура Документы
Knowledge
Base Browse
Document Title: Default IP address of all
Matrix
Knowledge
Base Search Summary
Product At times when you forget the IP Address or Password of System, then you
Downloads go for default IP Address or Password. In this document default IP
Addresses and Jumper positions of various Matrix Telecom products are
mentioned to help you quickly configure IP Address and Password as per
Returns Form your setup.
More Information
Trained
Partner ? Solution
All trained
engineers Process to follow:
enjoy free
1. Switch OFF the System
committed
2. Remove the CPU card or cover depending upon the system
support 3. Locate the appropriate Jumper
directly from 4. Change the position of Jumper from BC to AB or if the system is a
ICON LENX/MENX than you need to change the position of switch from OFF
to ON
5. Switch ON the System and wait until the it has fully booted as the
IP address does not immediately change
6. Log in with default IP Address and Password
Newest 7. Change the IP Address and Password as per your requirements
Documents 8. Switch OFF the System
9. Change the Jumper position from AB to BC or if the system is a
KBMX1020 - LENX/MENX change the switch position to ON to OFF. Note If you do
Delay not follow this step, than on every power off, the system’s IP Address
Connecting and Password will be set to default
Audio on SIP
10. Switch ON the System
Trunks
KBMX1018 -
ETERNITY 192.168.2.100 192.168.1.100 SW1 ON-
Audio File
MENX DEFAULT
Format Details
IP / /
for Matrix OFF-
Systems NORMAL
Home» Support » Matrix » Knowledgebase Remote Support
ETERNITY 192.168.1.101 J9 BC to AB
PE PE3SS
& PE3SP
ETERNITY 192.168.1.101 J2 BC to AB
NE
(Metal)
ETERNITY 192.168.1.101 J7 BC to AB
NE
(Plastic)
SETU 192.168.1.100 J1 BC to AB
VFXTH
Document Information
/
Home» Support » Matrix » Knowledgebase Remote Support