Академический Документы
Профессиональный Документы
Культура Документы
2
Switch Cabinet: X1 Service Training
3
Engine Switch Cabinet: X10 Service Training
4
Names and descriptions – component groups Service Training
Parts related to the BCS tower Components connected to Parts not connected to any controller belong to
belong to group number six. the Servo controller belong group number one.
to group number 2.
These are parts like the BCS screen, These are parts like the key switch, battery
FM Radio, E.g.: 2K1; 2Y1; 2S4; 2H1 main switches, working lights etc.
E.g.: 6A1; 6A2
E.g.: 1H3; 1K0.1; 1S3
2 K 1
6
Electrical Drawings Service Training
0 1 2 3 4 5 6 7 8 9
Current Path
7
Electrical Symbols Service Training
8
Electrical Symbols Service Training
V Diodes Diodes
9
References Service Training
If electric connections are separated on two different pages references will be used.
A reference can be identified by the arrow symbol:
10
References Service Training
If electric connections are separated on two different pages references will be used.
IMPORTANT: The arrow indicates a reference only and NO connection.
Physically on the machine the shown connection of the reference might be a cable of 5cm length.
11
References Service Training
If electric connections are separated on two different pages references will be used.
Reference information:
30/ 16.0
Reference name
12
Relays – Different Contact Names Service Training
13
Relays Service Training
Relays are most of the time separated on two pages: Coil and contacts
14
Relays Service Training
Relays are most of the time separated on two pages: Coil and contacts
11 14
14.1
Information about the relay contact. NO
contact. Contact names are 11 and 14
Relays are most of the time separated on two pages: Coil and contacts
-1K10
15.7
17
X1 Terminal Strip Service Training
18
X1 Terminal Strip Service Training
X1
X1
X1
X1
19