Академический Документы
Профессиональный Документы
Культура Документы
NWS
Worm Gear Reducers
Features
1 Aluminum alloy housing with 7 Standard hollow output bore
patented heat sink design and optional plug-in shafts
2 provides greater surface area provide greater flexibility
and higher thermal capacity in ordering and reduced
8 1 than traditional cast-iron inventory.
housings.
8 Polyester epoxy paint applied
2 Two bearings along the on the inside and outside of
3 input shaft prevent leaks the gearcase protects against
and contribute to flexibility rust.
2 in mounting. High quality
bearings increase reducer life 9 There is no breather for size
versus worm reducers with a 30B to 90B, there is breather
bushing on the input. for size 110B and 130B. NWM
and NWS are universal mount-
3 NEMA and IEC motor inputs ing, sealed for life, mainte-
available for greater customer nance-free reducers.
flexibility.
4 10 No compression chamber
7 4 Double-lip oil seals aid the required, preventing leaks and
reducer’s thermal capacity the risk of oil oxidation and
and extended the reducer’s contamination, and contribut-
oil life. ing to mounting flexibility.
Nomenclature
NWM 110B 40 180TC Foot Mount B3 Torque Arm
Aluminum Housing 5
48C B3
30B 7.5 Torque Arm
Shaft Mounted
standard hollow output bore
40B 10
56C B6
50B 15
63B 20 Baseplate
NWM
Motor Input Flange 140TC B7
75B 25 Foot Mounted
optional single or double plug-
90B 30 in output shaft
180TC B8
Double Extension
-- 40
Worm Shaft
Cast Iron Housing 50
210TC V5
110B 60 Flange Mounted
NMS optional FA mounting flange
Input Shaft
130B 80 and hollow output bore Protective Cover
-- V6
-- 100
2
Worm Gear Reducer Ratings 1750 rpm
Exact Output Max Max Exact Output Max Max
Size Ratio Speed Torque Input OHL Size Ratio Speed Torque Input OHL
i rpm in-lbs HP i rpm in-lbs HP
5 350 160 1.02 125 7.5 233 1555 6.47 581
7.5 233 160 0.70 143 10 175 1639 5.17 639
10 175 160 0.53 157 15 117 1681 3.62 732
15 117 160 0.38 180 20 88 1765 2.95 806
20 88 151 0.28 198 25 70 1681 2.31 868
30B 25 70 185 0.30 213 75B 30 58 1933 2.32 922
30 58 177 0.25 226 40 44 1849 1.76 1015
40 44 160 0.18 249 50 35 1765 1.40 1093
50 35 151 0.15 268 60 29 1681 1.18 1162
60 29 134 0.12 285 80 22 1597 0.91 1279
80 22 109 0.08 314 100 18 1513 0.75 1378
Dimensions
NWM NWS
Output Shaft
Size 30B 40B 50B 63B 75B 90B 110B 130B
R 0.70 0.83 1.11 1.23 1.36 1.51 1.79 1.92
U KEY 0.1875 x 1.250 0.1875 x 1.500 0.250 x 1.500 0.250 x 2.000 0.250 x 2.250 0.3125 x 2.50 0.375 x 2.750 0.375 x 2.750
4
Dimensions
Size 30B 40B 50B 63B 75B 90B 110B 130B
A 2.48 3.07 3.62 4.41 4.72 5.51 6.10 6.69
Input Shaft
Size 40B 50B 63B 75B 90B 110B 130B
SB 0.125 0.1875 0.1875 0.1875 0.1875 0.250 0.250
UB KEY 0.125 x 1.000 0.1875 x 1.250 0.1875 x 1.500 0.1875 x 2.000 0.1875 x 2.000 0.250 x 2.250 0.250 x 2.500
5
Worm Gear Reducers
Accessories
Protective Cover
Size Q
30B 1.65
40B 1.97
50B 2.28
63B 2.72
75B 2.91
90B 3.39
110B 3.70
130B 4.02
Baseplates
Size 30B 40B-A 40B-B 50B 63B-A 63B-B 75B 90B
6
Mounting and Availability
Mounting Positions
B3 B6 V5* V6*
B8 B7
*PLEASE NOTE: Mounting the reducer in V5
or V6 position may require added bearing
maintenance. Please contact a NIDEC-SHIMPO
Technical Service Representative for assistance
with these mounting positions.
7
NIDEC MOTOR CANADA CORPORATION
6617 Thimens Blvd
Saint-Laurent, Québec H4S 1W2, Canada
Phone: (514) 332-1880
www.drives.nidec-shimpo.com