Академический Документы
Профессиональный Документы
Культура Документы
Scope of Supply:
1. Anchor (2 No’s)
2. Anchor Chain (2 sets.) – 233.5m length each
Two (2) Stockless bower Anchor with high holding force together with shackle and stud link chain cable
to be supplied in accordance with the class rules.
Chain cables to be made from latest NCD 3914 & NCD 3909 standards.
Diameter 40mm, U3 stud-link-chain cables with a minimum length of 233.75m, on each side as per
classification Society.
Inspection:
The Anchor & Chain Cable to be inspected tested and certified by the Classification Society.
1
Kenter shackles as required for the chains to
be included
The ends of chain cables shall be fixed to chain
11. locker structure. Suitable arrangement with
End link / enlarged link to be provided.
12. Any other accessories for chain (Which are not
included above)
All the necessary standard spares to be indicated & included in scope of supply.
GENERAL
2
The dry weight of:
1. The entire anchors & chain cables
All drawings, diagrams, installation, commissioning & maintenance manuals
are to be provided with the equipment in both hard & soft copy.
1. Weight Estimated weight in Kg of the equipment and components should be
indicated in the drawing. The weighed weight of major items of the
equipment at the time of dispatch should be indicated in the dispatch
documents. It is to be ensured that the weight of the equipment is kept within
+/- 2% of the estimated weight.
Outline
2. To be specified by OEM
dimension
Noise & Every reasonable and practical effort shall be made to minimise equipment noise
3.
Vibration through sub-assembly and component design.
Anchor Chain drawing.
Dimension drawings for all equipment with installation guidelines, alignment
procedure and ideal location.
Factory standard test report.
Instrumentation list.
Documentatio Maintenance schedule giving details of tasks to be performed during
4.
n & Drawings equipment servicing in MS Excel format along with spares & tools
requirement.
Trouble shooting of equipment.
Binding Data.
List of all loose supplied items/accessories along with supplier's part nos. of
the same to be provided.
Instruction books, drawings, spare parts code books and tools lists should be
supplied in Three (3) copies for the yard in English language.
Instruction books (maintenance, operating and service manuals, parts
Instruction
5. manual) in English language shall be delivered in plasticized dossiers.
books
Two sets of CDs of the above manuals to be supplied along with the
equipment in PDF file.
Original printed manuals to be supplied, photocopies will not be accepted.
One set of standard tools adequate for undertaking the maintenance on
board should be supplied along with the offer.
6. Tools
One set of tools for Anchor Capstan. Mooring capstan & Chain stopper side
electronics also to be supplied.
OEM’s test certificate as per class requirement to be provided.
7. Certification
Manufacturer’s guarantee certificate to be provided.
Any item not listed above but required for satisfactory operation of the
equipment has to be a part of scope of supply of OEM.
8.
Note Firm to provide clause wise acceptance with deviation/comments if any to be
forwarded separately.