Вы находитесь на странице: 1из 44

BELL LUBRICANTS

Rev 6

Engineered for your machine

1
Index Pg

Bell Machines

Articulated Dump Trucks & Articulated Tractor................................................................................................................................... 03


Front End Loaders .............................................................................................................................................................................................. 04
Rigid Tractors ........................................................................................................................................................................................................ 05
Tri-Wheeled Loaders ......................................................................................................................................................................................... 06
Excavators .............................................................................................................................................................................................................. 07
Backhoe Loaders ............................................................................................................................................................................................... 08
Dozers ....................................................................................................................................................................................................................... 09
Motor Graders ...................................................................................................................................................................................................... 10
Bomag ............................................................................................................................................................................................................. 11 - 12
Forestry............................................................................................................................................................................................................ 13 - 14

Bell Lubricants

Mineral Engine Oil 15W-40 ........................................................................................................................................................................... 15


Semi Synthetic Engine Oil 10W-40 .......................................................................................................................................................... 16
Engine Run-in Oil 15W-40.............................................................................................................................................................................. 17
Automatic Transmission Oil .......................................................................................................................................................................... 18
Manual Transmission Oil ................................................................................................................................................................................ 19
Torque Fluid 434 ................................................................................................................................................................................................. 20
Hydraulic Oil VHVI .............................................................................................................................................................................................. 21
Hydraulic Oil VG 32............................................................................................................................................................................................ 22
Hydraulic Oil VG 46............................................................................................................................................................................................ 23
Hydraulic Oil VG 68............................................................................................................................................................................................ 24
Universal Tractor Fluid ..................................................................................................................................................................................... 25
Gear Oil 85W-140................................................................................................................................................................................................ 26
Gear Oil Limited Slip 80W-90....................................................................................................................................................................... 27
Gear Oil Limited Slip 85W-140.................................................................................................................................................................... 28
Borate Oil................................................................................................................................................................................................................. 29
Brake Fluid ............................................................................................................................................................................................................. 30
Extended Life Coolant - Premix 50 .......................................................................................................................................................... 31
Extended Life Coolant - Premix 50 N ..................................................................................................................................................... 32
Grease - Multi Purpose ................................................................................................................................................................................... 33
Grease - Super Heavy Duty........................................................................................................................................................................... 34
Grease - Wheel Bearing .................................................................................................................................................................................. 35
Grease - High Temperature ........................................................................................................................................................................... 36
Cutter Bar Oil ........................................................................................................................................................................................................ 37
Machining Fluid..................................................................................................................................................................................................... 38
Hand Cleaner......................................................................................................................................................................................................... 39

Bell Lubricants Recommendations in accordance with Bell Equipment specifications

The recommendations provided herein are given in good faith and on the basis of the best
information available at the time of issue. It is the responsibility of the user to ensure that the
products are used in the applications for which they are intended, and no legal liability therefore is
accepted by Bell Lubricants

2
Articulated Dump Trucks & Articulated Tractors

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


C-series Mineral Engine Oil 15W-40 BN005541
D-series & E-series Semi Synthetic Engine Oil 10W-40 BN005545

Coolant Extended Life Coolant - Premix 50 BN005611

Transmission Automatic Transmission Oil BN005548

Transfer box Automatic Transmission Oil BN005548

Axles
C-series, D-series & E-series with Dry Disc Brakes Gear Oil Limited Slip 80W-90 BN005574
D-series & E-series with Wet Disc Brakes Borate Oil BN005579

Wet disc brakes Cooling


B40D Brake cooling reservoir Universal Tractor Fluid BN005583

Dry disc brakes


B40C & B35C Brake Fluid BN005559

Hydraulics* Hydraulic Oil VHVI BN005556


Hydraulic Oil VG68 BN005597

Grease
General (Pin, Bushes, Auto greasing, etc.) Grease - Multi Purpose BN005567
Drivetrain (Bearings & Propshaft, etc.) Grease - Wheel Bearing BN005561
Drivetrain (High Temperature PTO-where applicable) Grease - High Temperature BN005770

* Either oil may be used but do not mix. (Drain and refill only)

3
Front End Loaders

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


D-series & E-series Semi Synthetic Engine Oil 10W-40 BN005545
C-series Mineral Engine Oil 15W-40 BN005541

Coolant
D-series & E-series Extended Life Coolant - Premix 50 N BN005608
C-series Extended Life Coolant - Premix 50 BN005611

Transmission
C-series & D-series & E-series Universal Tractor Fluid BN005583

Axles
C-series, L705D - L1004D & E-series Gear Oil Limited Slip 80W-90 BN005574
D-series & E-series Universal Tractor Fluid BN005583

Wet brakes / Park brake Universal Tractor Fluid BN005583

Dry disc brakes


B-series Brake Fluid BN005559

Hydraulics
C-series, 1706D MKII &L1806D - L2706D Universal Tractor Fluid BN005583
L705D - L1706D & E-series Semi Synthetic Engine Oil 10W-40 BN005545
or Mineral Engine Oil 15W-40 BN005541
Grease
General (Pin, Bushes, etc.) Grease - Multi Purpose BN005567
Drivetrain (Bearings, Propshaft, etc.) Grease - Wheel Bearing BN005561

4
Rigid Tractor

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


Engine Mineral Engine Oil 15W-40 BN005541

Coolant Extended Life Coolant - Premix 50 BN005611

Transmission
Manual Manual Transmission Oil BN005592
Automatic (Series -I) Torque Fluid 434 BN005589
Automatic (Series -II & MKIII) Automatic Transmission Oil BN005548

Transfer Box Gear Oil Limited Slip 80W-90 BN005574

Axles Gear Oil Limited Slip 80W-90 BN005574

Hydraulics Hydraulic Oil VG 68 BN005597

Grease Grease - Multi Purpose BN005567

5
Tri-Wheeled Loaders

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


Engine Mineral Engine Oil 15W-40 BN005541

Axles / Wheels Gear Oil Limited Slip 80W-90 BN005574

Park Brake Housing Mineral Engine Oil 15W-40 BN005541

Hydraulics Hydraulic Oil VG 68 BN005597

Grease Grease - Multi Purpose BN005567

6
Excavators

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


Mk1/2/3 & R# Mineral Engine Oil 15W-40 BN005541
E#, R964C & R974C Semi Synthetic Engine Oil 10W40 BN005545

Coolant
Mk1/2/3, R#, E#, R964C & R974C Extended Life Coolant - Premix 50 N BN005608

Final Drive & Slew Gear Box


Mk1/2/3, R# Gear Oil Limited Slip 85W-140 BN005586
E#, R964C & R974C Gear Oil Limited Slip 80W90 BN005574

Pump Distributor Gear


E#, R964C & R974C Gear Oil Limited Slip 80W90 BN005574

Hydraulics
Mk1/2/3, R# Universal Tractor Fluid BN005583
E#, R964C & R974C Mineral Engine Oil 15W40 BN005541

Grease
Mk1/2/3, R#, E#, R964C & R974C
General (Pin, Bushes, etc) Grease - Multi Purpose BN005567
Swing Ring - All Excavators Grease - Wheel Bearing BN005561

7
Backhoe Loaders

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


G-series, J-series & K-series Mineral Engine Oil 15W-40 BN005541

Coolant
G-series, J-series & K-series Extended Life Coolant - Premix 50 N or BN005608 or
Extended Life Coolant - Premix 50 BN005611
Transmission
G-series, J-series & K-series Universal Tractor Fluid BN005583

Axles
G-series, J-series & K-series Universal Tractor Fluid BN005583

Hydraulics
G-series, J-series & K-series Mineral Engine Oil 15W-40 BN005541

Grease Grease - Super Heavy Duty BN005600

8
Dozers

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


C-series & J-series Mineral Engine Oil 15W-40 BN005541

Coolant
C-series & J-series Extended Life Coolant - Premix 50 N BN005608

Final Drives Rollers & Idlers


C-series & J-series Gear Oil Limited Slip 80W-90 BN005574

Hydrostatic Drive
C-series & J-series Mineral Engine Oil 15W-40 BN005541

Hydraulics
C-series & J-series Mineral Engine Oil 15W-40 BN005541

Grease
General (Pin, Bushes, etc) Grease - Multi Purpose BN005567
Drive train (Bearings, Propshaft, etc) Grease - Wheel Bearing BN005561

9
Liebherr Dozers

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


Bell Semi Synthetic Oil BN005545

Coolant
Extended Life Coolant - Premix 50 N BN005608

Final Drives Distibutor Gear


Gear Oil Limited Slip 80W-90 BN005574

Hydrostatic Drive, Axle Bearing &


Dou Cone/Slip Ring Seal Travel Gear Mineral Engine Oil 15W-40 BN005541

Hydraulics
Mineral Engine Oil 15W-40 BN005541

Grease
General (Pin, Bushes, etc) Grease - Multi Purpose BN005567
Drive train (Bearings, Propshaft, etc) Grease - Wheel Bearing BN005561

10
Finlays

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


Mineral Engine Oil 15W-40 BN005541

Coolant
Extended Life Coolant - Premix 50 BN005611

Hydraulics
Hydraulic Oil VG68 BN005597

Track Gear Boxes


Gear Oil Limited Slip 80W-90 BN005574

Feeder Units (Vibrating)


Gear Oil Limited Slip 85W-140 BN005586

Cone Lubrication Oil Bell Cone Lube BN028424

Wedge Ring Grease (Cone)


Molybentone - 400g FT31.12.0312

Grease (All Bearings)


Grease Wheel Bearing BN005561

Feeder Gear Boxes Gear Oil Limited Slip 80W-90 BN005574

11
Motor Graders

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


D-series & G-series Mineral Engine Oil 15W-40 BN005541

Coolant
D-series & G-series Extended Life Coolant - Premix 50 N BN005608

Transmission
D-series & G-series Universal Tractor Fluid BN005583

Axles
Differentials, D-series & G-series Universal Tractor Fluid BN005583
Tandems, 6WD Hubs, D-series & G-series Universal Tractor Fluid BN005583

Hydraulics
D-series & G-series Mineral Engine Oil 15W-40 BN005541

Circle Drive Box


D-series & G-series Universal Tractor Fluid BN005583

Grease
General (Pin, Bushes, etc) Grease - Multi Purpose BN005567
Drive train (Bearings, Propshaft, etc) Grease - Wheel Bearing BN005561

12
Bomag

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


Single drum roller with air cooled engine Mineral Engine Oil 15W-40 BN005541
Single drum roller with water cooled engine Semi Synthetic Engine Oil 10W-40 BN005545
Refuse compactors with Cummins engine Mineral Engine Oil 15W-40 BN005541
Refuse compactors with Deutz water cooled engine Semi Synthetic Engine Oil 10W-40 BN005545
Heavy tandem roller with Deutz water cooled engine Semi Synthetic Engine Oil 10W-40 BN005545
Light tandem roller with Kubota engine Mineral Engine Oil 15W-40 BN005541
Walk behind roller with Hatz engine Mineral Engine Oil 15W-40 BN005541
Vibratory plates with Honda engine Mineral Engine Oil 15W-40 BN005541
Recyclers with Deutz water cooled engine Semi Synthetic Engine Oil 10W-40 BN005545

Vibration Bearing
Single drum roller with air cooled engine Semi Synthetic Engine Oil 15W-40 BN005541
Single drum roller with water cooled engine Semi Synthetic Engine Oil 15W-40 BN005541
Heavy tandem roller with Deutz water cooled engine Semi Synthetic Engine Oil 15W-40 BN005541
Light tandem roller with Kubota engine Semi Synthetic Engine Oil 15W-40 BN005541
Walk behind roller with Hatz engine Semi Synthetic Engine Oil 15W-40 BN005541
Vibratory plates with Honda engine Semi Synthetic Engine Oil 15W-40 BN005541
Vibration Bearing vario control Manual Transmission Oil 75W90 BN005593

Axle Oil
Single drum roller with air cooled engine Gear Oil Limited Slip 85W-140 BN005586
Single drum roller with water cooled engine Gear Oil Limited Slip 85W-140 BN005586

13
Bomag

Final Drive Recommendations Part Numbers


Refuse compactors with Cummins engine Gear Oil Limited Slip 85W-140 BN005586
Refuse compactors with Deutz water cooled engine Gear Oil Limited Slip 85W-140 BN005586
Heavy tandem roller Gear Oil Limited Slip 85W-140 BN005586

Hydraukic Oil
Single drum roller with air cooled engine Hydraulic Oil VG46 BN005602
Single drum roller with water cooled engine Hydraulic Oil VG46 BN005602
Refuse compactors with Cummins engine Hydraulic Oil VG46 BN005602
Refuse compactors with Deutz water cooled engine Hydraulic Oil VG46 BN005602
Heavy tandem roller with Deutz water cooled engine Hydraulic Oil VG46 BN005602
Light tandem roller with Kubota engine Hydraulic Oil VG46 BN005602
Walk behind roller with Hatz engine Hydraulic Oil VG32 BN005605
Recyclers with Deutz water cooled engine Hydraulic Oil VG46 BN005602

Coolant for all Deutz Water Cooled Engines Extended Life Coolant - Premix 50 BN005611

Grease Grease - Multi Purpose BN005567

Special Products

Recommendations Part Numbers


Recycler Transmission Fuchs Renolin CLP220 BMG00993009

Change Over Weight Housing Silicone Oil 47V100cSt BMG00970008

BVC Exciter Gears Autol Top 2000 BMG00996001

14
Forestry

Bell Service Bulletin : Benefits of using a combination of low sulphur fuels with high quality lubricating oils
Use of Bell recommended oils ensures efficient performance and optimum protection of the engine. However, the use of low sulphur fuels with recommended oil
provides maximum benefit. Sulphur in diesel forms sulphuric acid that play a major role in increasing engine wear. On the other hand, low sulphur diesel forms
less sulphuric acid when combusted which leads to lower engine wear rates, reduced harmful exhaust emissions, improved combustion properties and longer
engine life. Sulphur in diesel leads to the formation of sulphate particulates. In the engine oil, these cause depletion of additives and reduced oil life.

Engine Recommendations Part Numbers


Knuckle Boom Loaders Mineral Engine Oil 15W-40 BN005541
Skidders Mineral Engine Oil 15W-40 BN005541
Tracked Harvesters / Fellerbunchers Mineral Engine Oil 15W-40 BN005541
Forwarders Mineral Engine Oil 15W-40 BN005541
Wheeled Harvesters Mineral Engine Oil 15W-40 BN005541
Wheeled Fellerbunchers Mineral Engine Oil 15W-40 BN005541

Transmission / Transfercase
Skidders Universal Tractor Fluid BN005583
Forwarders Gear Oil Limited Slip 80W-90 BN005574
Wheeled Harvesters Gear Oil Limited Slip 80W-90 BN005574
Wheeled Fellerbunchers Universal Tractor Fluid BN005583

Hydraulic System
Knuckle Boom Loaders Mineral Engine Oil 15W-40 BN005541
Skidders Mineral Engine Oil 15W-40 BN005541
Tracked Harvesters / Fellerbunchers Mineral Engine Oil 15W-40 BN005541
Forwarders Hydraulic Oil VG 68 BN005597
Wheeled Harvesters Hydraulic Oil VG 68 BN005597
Wheeled Fellerbunchers Mineral Engine Oil 15W-40 BN005541

Axles / Bogies / Final Drive / Track Drive Oil


Skidders Universal Tractor Fluid BN005583
Tracked Harvesters / Fellerbunchers Gear Oil Limited Slip 80W-90 BN005574
Forwarders Gear Oil Limited Slip 80W-90 BN005574
Wheeled Harvesters Gear Oil Limited Slip 80W-90 BN005574
Wheeled Fellerbunchers Universal Tractor Fluid BN005583

15
Forestry

Brake / Park Brake Recommendations Part Numbers


Skidders Universal Tractor Fluid BN005583
Forwarders Universal Tractor Fluid BN005583
Wheeled Harvesters Universal Tractor Fluid BN005583
Wheeled Fellerbunchers Universal Tractor Fluid BN005583

Crane Base / Swing Drive


Knuckle Boom Loaders Gear Oil Limited Slip 80W-90 BN005574
Tracked Harvesters / Fellerbunchers Gear Oil Limited Slip 80W-90 BN005574
Forwarders Gear Oil Limited Slip 80W-90 BN005574
Wheeled Harvesters Gear Oil Limited Slip 80W-90 BN005574

Pump Drive
Tracked Harvesters / Fellerbunchers Universal Tractor Fluid BN005583
Wheeled Fellerbunchers Universal Tractor Fluid BN005583

Cooling System
Knuckle Boom Loaders Extended Life Coolant - Premix 50 N BN005608
Skidders Extended Life Coolant - Premix 50 N BN005608
Tracked Harvesters / Fellerbunchers Extended Life Coolant - Premix 50 N BN005608
Forwarders Extended Life Coolant - Premix 50 N BN005608
Wheeled Harvesters Extended Life Coolant - Premix 50 N BN005608
Wheeled Fellerbunchers Extended Life Coolant - Premix 50 N BN005608

Grease
Knuckle Boom Loaders Grease - Super Heavy Duty BN005600
Skidders Grease - Super Heavy Duty BN005600
Tracked Harvesters / Fellerbunchers Grease - Super Heavy Duty BN005600
Forwarders Grease - Super Heavy Duty BN005600
Wheeled Harvesters Grease - Super Heavy Duty BN005600
Wheeled Fellerbunchers Grease - Super Heavy Duty BN005600

Cablift / Engine Inclosure


Skidders Universal Tractor Fluid BN005583
Tracked Harvesters / Fellerbunchers Mineral Engine Oil 15W-40 BN005541
Forwarders Universal Tractor Fluid BN005583
Wheeled Harvesters Universal Tractor Fluid BN005583
Wheeled Fellerbunchers Universal Tractor Fluid BN005583

Winches
All Skidder Winches Universal Tractor Fluid BN005583

16
Mineral Engine Oil 15W-40

Bell Mineral Engine Oil 15W-40 is a super high performance multigrade diesel, and petrol engine oil with
high quality mineral base stocks and specially developed additives.

Application Product Specifications

Bell Mineral Engine Oil 15W-40 is intended for all - ACEA A3, B3, E3-96 & E5-02
naturally aspirated and turbocharged petrol and - MAN 3275
diesel engines operating under the API service - EO-M Plus
conditions described below. - Mercedes-Benz 228.3
- API CI-4 & SL
The enhanced detergency and dispersancy of Bell - Mack EO-M plus
Mineral Engine Oil 15W-40 enables it to remove pre- - Cummins CES 20077/78
existing sludge and other deposits from engines that - Volvo VDS-3
have operated on other oils. An early oil and filter - MTU Type 2
change is therefore recommended for the initial fill - Caterpillar ECF-1
when switching to this oil.
Storage & Handling
The superior lubricating properties of Bell Mineral
Engine Oil 15W-40 can retard the bedding-in of Use PVC, nitrile or other oil resistant gloves and
new components and it is not recommended for protective clothing to prevent skin contact. Where
use during the running-in phase of new or rebuilt eye contact is a potential hazard, goggles should be
engines. worn.

Features & Benefits Avoid temperatures above 80°C and strong oxidizing
agents. Ambient temperatures and atmospheric
Bell Engine Oil Multigrade 15W-40 has the following pressures normally encountered within buildings or
features and benefits: roofed-over outdoor storage areas are acceptable.

- excellent oxidation stability Avoid entering areas where mists or vapours have
- enhanced high and low temperature dispersancy built up as a result of abnormal temperatures or
and detergency pressures without the proper breathing equipment
- outstanding anti-sludging properties and protective clothing.
- very good cold starting ability
- good fuel saving properties

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 14.5
@ 40°C mm2/s 110
Apparent Viscosity mPa.s @ -15°C 3000 D5293
Viscosity Index 135 D2270 226
Pour Point °C -23 D97 15
Flash Point (COC) °C 220 D92 36
Evaporative Loss (Noack)% m/m 12 CEC L-40-T-87 or DIN 51581
Density @ 20°C kg/m3 890 D4052 365
Sulphated Ash % m/m 1.4 D874 163
Total Base Number mg KOH/g 11 D2896 276

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005543 20L BN005542 210L BN005541

17
Semi Synthetic Engine Oil 10W-40

Bell Semi Synthetic Engine Oil 10W-40 is a semi synthetic multigrade engine oil formulated to protect
latest technology petrol and diesel engines including engines equipped with exhaust gas recirculation
(EGR) systems. The oil is designed to enable advanced engine technology to meet strict exhaust emission
standards.

Each component of the oil has been individually selected to provide superior engine protection and
enable ultimate engine performance.

Application Product Specifications

Bell Semi Synthetic Engine Oil 10W-40 is designed - API CI-4/CF, SL


to prolong the life of heavy-duty, high-speed diesel - RXD/ RLD-2
and petrol engines operating under severe service - ACEA E7-04 Issue 2, E4-07
conditions. - CES 20077 / 78
- Mercedes-Benz 228.5
The superior lubricating properties of Bell Semi Syn- - Mack EO-M+
thetic Engine Oil 10W-40 can retard the bedding-in - Volvo VDS-3
of new components and it is not recommended for - MTU Type 3
use during the running-in phase of new or rebuilt - MAN 3277
engines.
Storage & Handling

Features & Benefits Use PVC, nitrile or other oil resistant gloves and
protective clothing to prevent skin contact. Where
Bell Semi Synthetic Engine Oil 10W-40 provides eye contact is a potential hazard, goggles should be
improved oxidation resistance, improved deposit worn.
protection and better wear protection while ensuring
energy conservation. Avoid temperatures above 80°C and strong oxidizing
agents.

Ambient temperatures and atmospheric pressures


normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.
Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 14
@ 40°C mm2/s 100
Apparent Viscosity mPa.s @ -25°C 6200 D5293
Flash Point (COC) °C 195 D92 36
Density @ 15°C kg/m3 870 D4052 365
Sulphated Ash % m/m 1,0 D874 163
Total Base Number mg KOH/g 12 D2896 276

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005547 20L BN005546 210L BN005545

18
Engine Run-in Oil 15W-40

Bell Run-In Oil 15W-40 is a multi-grade internal combustion engine oil formulated from quality base stocks
and additives.

Application Product Specifications

Bell Run-In Oil 15W-40 is intended for all naturally - API: SF/CC, CF
aspirated and turbocharged petrol and diesel
engines operating under the API service conditions
described below. Storage & Handling

Bell Run-In Oil 15W-40 is recommended for use Use PVC, nitrile or other oil resistant gloves and
during the run-in phase of new or rebuilt engines. protective clothing to prevent skin contact. Where
Bell Run-In Oil 15W-40 enables the bedding-in of eye contact is a potential hazard, goggles should be
new components. worn.

Features & Benefits Avoid temperatures above 80°C and strong oxidizing
agents.
Bell Run-in Oil 15W-40 has the following features
and benefits: Ambient temperatures and atmospheric pressures
normally encountered within buildings or roofed-over
- Enables running-in phase of new or re-built outdoor storage areas are acceptable.
engines
- Very good cold starting ability Avoid entering areas where mists or vapours have
- Good fuel saving properties built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 14,1
@ 40°C mm2/s 103
Apparent Viscosity mPa.s @ -15°C 3390 D5293
Viscosity Index 125 D2270 226
Pour Point °C -30 D97 15
Flash Point (COC) °C 220 D92 36
Evaporative Loss (Noack) % m/m 12 CEC L-40-T-87
or DIN 51581
Density @ 20°C kg/m3 883 D4052 365
Total Base Number mg KOH/g 10 D2896 276

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005746 20L BN005767 210L BN005766

19
Automatic Transmission Oil

Bell Automatic Transmission Oil is a synthetic fluid designed to meet the demanding requirements of
modern heavy duty automatic transmissions.

Application Product Specifications

Bell Automatic Transmission Oil is recommended Meets the Allison TES 295 specification.
for use in modern high performance trucks, buses,
utility vehicles, haulers, vans and other equipment Storage & Handling
requiring Allison TES 295 performance level.
Use PVC, nitrile or other oil resistant gloves and
Features & Benefits protective clothing to prevent skin contact. Where
eye contact is a potential hazard, goggles should be
Bell Automatic Transmission oil has been formulated worn.
to exceed the original TES 295 specification:
Avoid temperatures above 60°C and strong oxidizing
- Excellent seal compatibility agents.
- Stringent cold
- Increased durability Ambient temperatures and atmospheric pressures
- Protects against thermal breakdown at high normally encountered within buildings or roofed-over
temperatures while still providing outstanding  outdoor storage areas are acceptable.
performance at ambient temperatures as low as
-54 °C. Avoid entering areas where mists or vapours have
- It offers outstanding gear shifting and power built up as a result of abnormal temperatures or
transfer performance. pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM


Density @ 20°C kg/l 0.85 ASTM 4052
Viscosity
@ 100°C cSt 7 ASTM D445
@ 40°C cSt 39 ASTM D445
@-40°C cP 8 400 ASTM D2983
Viscosity Index 168
Pour Point °C -54 ASTM D97
Flash Point (COC) °C 235
Colour Gold Visual

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005550 20L BN005549 210L BN005548

20
Manual Transmission Oil

Bell Synthetic Manual Transmission Oil 75W-90 is a fully-synthetic, multi-grade gear oil designed for use
in gearboxes and differentials operating under a wide range of ambient temperatures.

Application Product Specifications

Bell Synthetic Manual Transmission Oil 75W-90 is - API GL-4


intended for most heavy duty and passenger cars - Arvin Meritor 0-76-N
differentials requiring API GL4/ GL5 or MT1 level of - API GL-5 / MT1
extreme pressure protection. - MAN M 3343 Type S
- MIL-PRF-2105E
Features & Benefits - Scania STO 1:0
- MB-Approval 235.8
Bell Synthetic Manual Transmission Oil 75W- - Volvo 97310/97312
90 exceeds both API GL-4 and GL-5 gear oil - Mack GO-J
requirements with enhanced features and benefits - ZF TE-ML 02B, 05B, 07A, 08, 12B, 16F, 17B, 19C
such as:
Storage & Handling
- Retention of full lubrication characteristics down to 
temperatures of -40°C Use PVC, nitrile or other oil resistant gloves and
- Enhanced thermal stability with resultant longer protective clothing to prevent skin contact. Where
drain interval capabilities and improved component  eye contact is a potential hazard, goggles should be
cleanliness even under severe operating conditions worn.
- Outstanding shear stability
- Excellent high temperature gear score Avoid temperatures above 80°C and strong oxidizing
performance with resultant longer differential agents.
service life
- Better fuel consumption especially during low  Ambient temperatures and atmospheric pressures
temperature operation normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 15.3
@ 40°C mm2/s 104
@ -40°C mPa/s 100 000 D2983
Pour Point °C -57 D97 15
Flash Point °C 180 D92 36
Density @ 20°C Kg/m3 868 D4052 365

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005595 20L BN005593 210L BN005592

21
Torque Fluid 434

Bell Torque Fluid 434 is a multipurpose gear and transmission oil whose viscosity is equivalent to SAE
30 oil. It can be used in many drive train applications and is specially formulated for good chatter
suppression, low temperature performance & anti-foam properties.

Application Product Specifications

Bell Torque Fluid 434 can be used for the following - Allison C-3 & C-4
applications where the grade is specified: - Sperry Vickers M-2950-S
- API CF & CF-2
- hydraulic systems - ZF TE-ML-03 & 04* (both)
- heavy duty drive train and hydraulic systems - Caterpillar TO-4
- torque converters
- gear units of certain commercial and construction  Storage & Handling
vehicles
Use PVC, nitrile or other oil resistant gloves and
Features & Benefits protective clothing to prevent skin contact. Where
eye contact is a potential hazard, goggles should be
Bell Torque Fluid 434 is specifically formulated worn.
to meet Caterpillar’s TO-4 specification for
transmission/drive train oils (TDTO). Bell Torque Avoid temperatures above 80°C and strong oxidizing
Fluid 434 meets the API CF specification agents.
requirements.
Ambient temperatures and atmospheric pressures
normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 12
@ 40°C mm2/s 108
Viscosity Index 94 D2270 226
Pour Point °C -18 D97 15
Flash Point (COC) °C 240 D92 36
Density @ 20°C kg/m3 897 D4052 365

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005591 20L BN005590 210L BN005589

22
Hydraulic Oil VHVI

Bell Hydraulic Oil VHVI is formulated from solvent refined base oils, viscosity index improvers, foam and
oxidation-resistant fluid having frictional characteristics suitable for automatic transmissions designed to
use Type G and Type F automatic transmission fluids and Ford specification ESW-M2C 33-G fluids.

Bell Hydraulic Oil VHVI is dyed red like any other ATF fluid.

Application Product Specifications

Bell Hydraulic Oil VHVI is intended for the following - Allison C-4
components of many commercial vehicles and off- - Denison HF-0
highway equipment: - Ford ESW-M2C 33-G
- MB 236.1
- heavy-duty transmissions - General Motors Type F and G
- power steering systems - ZF TE-ML-09,11& 14
- hydraulic and hydrostatic systems where Allison - Caterpillar T0-2
C-3 or C-4 fluid is recommended - Voith

Do NOT use in systems with silver-coated bearings Storage & Handling

Features & Benefits Use PVC, nitrile or other oil resistant gloves and
protective clothing to prevent skin contact. Where
This product is used primarily for some commercial eye contact is a potential hazard, goggles should be
transmissions and certain manual gearboxes and worn.
power steering units. Bell Hydraulic Oil VHVI is
recommended for the automatic transmissions of Avoid temperatures above 80°C and strong oxidizing
Ford and other vehicles such as Leyland, Mazda, agents.
Volvo and older Toyota models.
Ambient temperatures and atmospheric pressures
normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity
@ 100°C mm2/s 8.2 D445 71
@ 40°C mm2/s 39 D445 71
@ -18°C cP 1400 D2983
Viscosity Index 190 D2270 226
Pour Point °C -40 D97 15
Flash Point (COC) °C 210 D92 36
Cu Corrosion (3h @ 100°C) 1b D130 154
Rust Protection Visual Pass D665 B 135 B
Density @ 20°C kg/m3 878 D4052 365

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005558 20L BN005557 210L BN005556

23
Hydraulic Oil VG 32

Bell Hydraulic Oil 32 is a quality, rust and oxidation-inhibited oil having anti-foam properties. It contains an
anti-wear additive that combines the functions of lubricating and hydraulic oils in a single product.

Application Product Specifications

Bell Hydraulic Oil VG 32 is intended for: - Atlas Copco ECB 573/8


- General Motors LH-04-1 & LH-06-1
- hydraulic systems - Cetop RP 91G Category HM
- lightly to moderately loaded spur and bevel gears - Lee-Norse 100-1
- compressors (including certain rotary and other  - Cincinnati Milacron P-68, P-69 & P-70,
compressors) - U.S. Steel 127 & 136
- machine tool and other bearings - P75A, P75B & P75C
- industrial torque converters - Voest-Alpine - Miners
- hydraulic couplings - David Brown 0A, 1A, 2A, 3A
- Ford M-6C32B
Features & Benefits - Denison HF-0, HF-1 & HF-2
- 51524 Part 2
Bell Hydraulic Oil VG 32 can be used in the hydraulic - Sperry Vickers I-286-S & M-2950-S
systems of automotive and earthmoving equipment
wherever SAE 10W engine oils are normally Storage & Handling
specified or preferred due to local conditions
Use PVC, nitrile or other oil resistant gloves and
Bell Hydraulic Oils can be used to good advantage protective clothing to prevent skin contact. Where
in rotary sliding vane pumps where vane sticking is eye contact is a potential hazard, goggles should be
experienced with other lubricants worn.

Avoid temperatures above 80°C and strong oxidizing


agents.

Ambient temperatures and atmospheric pressures


normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 5
@ 40°C mm2/s 30
Viscosity Index 100 D2270 226
Pour Point °C -18 D97 15
Flash Point (COC) °C 210 D92 36
Density @ 20°C kg/m3 872 D1298 160
Load Carrying Capacity Stage 11
Anti-wear Characteristics mg loss 30 D2882

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005607 20L BN005606 210L BN005605

24
Hydraulic Oil VG 46

Bell Hydraulic Oil VG 46 is a high quality, rust and oxidation-inhibited oil having anti-foam properties. It
contains an anti-wear additive that combines the functions of lubricating and hydraulic oils in a single
product.

Application Product Specifications

Bell Hydraulic Oil VG 46 is intended for: - Atlas Copco ECB 573/8


- General Motors LH-04-1 & LH-06-1
- hydraulic systems - Cetop RP 91G Category HM
- lightly to moderately loaded spur and bevel gears - Lee-Norse 100-1
- compressors (including certain rotary and other  - Cincinnati Milacron P-68, P-69 & P-70,
compressors) - U.S. Steel 127 & 136
- machine tool and other bearings - P75A, P75B & P75C
- industrial torque converters - Voest-Alpine - Miners
- hydraulic couplings - David Brown 0A, 1A, 2A, 3A
- Ford M-6C32B
Do NOT use in systems with silver-coated bearings - Denison HF-0, HF-1 & HF-2
- 51524 Part 2
Features & Benefits
Storage & Handling
Bell Hydraulic Oil 46 can be used in the hydraulic
systems of automotive and earthmoving equipment Use PVC, nitrile or other oil resistant gloves and
wherever SAE 15W engine oils are normally protective clothing to prevent skin contact. Where
specified or preferred due to local conditions eye contact is a potential hazard, goggles should be
worn.
Bell Hydraulic Oils can be used to good advantage Avoid temperatures above 80°C and strong oxidizing
in rotary sliding vane pumps where vane sticking is agents.
experienced with other lubricants.
Ambient temperatures and atmospheric pressures
normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 7
@ 40°C mm2/s 47
Viscosity Index 105 D2270 226
Pour Point °C -15 D97 15
Flash Point (COC) °C 225 D92 36
Density @ 20°C kg/m3 875 D1298 160
Load Carrying Capacity Stage 11
Anti-wear Characteristics mg loss 30 D2882

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005604 20L BN005603 210L BN005602

25
Hydraulic Oil VG 68

Bell Hydraulic Oil VG 68 is a high quality, rust and oxidation-inhibited oil with very high viscosity index and
excellent anti-rust, anti-oxidation and anti-foam properties. It contains anti-wear additives and combines
the functions of lubricating and hydraulic oils in a single product.

Application Product Specifications

Bell Hydraulic Oil VG 68 can be used under widely - Atlas Copco ECB 573/8
varying temperature conditions and is therefore - General Motors LH-06-1
suitable for: - Cetop RP 91G Category HM
- Lee-Norse 100-1
- Forklifts moving regularly into and out of cold - Cincinnati Milacron P-69 & P75C
storage areas. - U.S. Steel 127 & 136
- Exhaust turbine bearings. - David Brown 0A, 1A, 2A, 3A
- Hydraulic hatch covers aboard ships. - Voest-Alpine - Miners
- Machine tool copying attachments and other - Denison HF-0, HF-1 & HF-2
equipment where only small viscosity variations - Ford M-6C32B
can be tolerated. - 51524 Part 2
- Other applications where the effects of widely - Sperry Vickers I-286-S & M-2950-S
ranging operating temperatures on viscosity must
be minimized. Storage & Handling

Do NOT use in systems with silver-coated bearings Use PVC, nitrile or other oil resistant gloves and
protective clothing to prevent skin contact. Where
Features & Benefits eye contact is a potential hazard, goggles should be
worn.
Bell Hydraulic Oil VG 68 can be used to good
advantage in rotary sliding vane pumps where vane Avoid temperatures above 80°C and strong oxidizing
sticking is experienced with other lubricants. agents.

Ambient temperatures and atmospheric pressures


normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 12
@ 40°C mm2/s 70
Viscosity Index 165 D2270 226
Pour Point °C -36 D97 15
Flash Point (COC) °C 230 D92 36
Density @ 20°C kg/m3 880 D4052 365
Load Carrying Capacity (FZG) Stage 11 334
Anti-wear Characteristics mg loss 30 D2882

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005599 20L BN005598 210L BN005597

26
Universal Tractor Fluid

Bell Universal Tractor Fluid is a multipurpose gear and transmission oil with a viscosity equivalent to that
of an SAE 20W engine oil.

Application Product Specifications

Bell Universal Tractor Fluid is intended for: - Allison C-3 & C-4
- John Deere J20C
- tractor transmissions and hydraulic systems - API GL-4
- differentials equipped with wet brakes - Massey Ferguson M1110 - M1145
- drive train systems - Caterpillar TO-2
- torque converters - ZF (Tractors) TE-ML-03E, 05F, -06
- gear units of certain commercial and construction  Ford M2C134 - A/B/C/D; M2C86 - B/C
vehicles - JI Case MS 1204 to MS 1210 - B6
- New Holland: FNHA-2-C-210.00
Features & Benefits
Storage & Handling
Bell Universal Tractor Fluid can serve as a
replacement for all oils, other than engine oil, used Use PVC, nitrile or other oil resistant gloves and
in agricultural tractors. This type of oil is sometimes protective clothing to prevent skin contact. Where
also referred to as Universal Tractor Transmission Oil eye contact is a potential hazard, goggles should be
or UTTO. worn.

It can be used in wet brake and many drive train Avoid temperatures above 80°C and strong oxidizing
applications and is specially formulated for good: agents.

- chatter suppression Ambient temperatures and atmospheric pressures


- low temperature performance normally encountered within buildings or roofed-over
- anti-foam properties outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 9.7
@ 40°C mm2/s 65
Viscosity Index 157 D2270 226
Pour Point °C -36 D97 15
Flash Point (COC) °C 240 D92 36
Density @ 20°C kg/m3 889 D4052 365

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005585 20L BN005584 210L BN005583

27
Gear Oil 85W-140

Bell Gear Oil 85W-140 is a sulphur/phosphorus type, multipurpose, extreme pressure mineral gear oil with
high load-carrying properties.

Application Product Specifications

Bell Gear Oil 85W-140 has been developed for: - API GL-5
- U.S. MIL-L-2105D
- Spiral bevel and moderately offset hypoid axles - SABS CKS 74
operating under various combinations of high - ZF TE-ML-01, 05, 07
speed, low speed, high torque and shock load
service conditions. Storage & Handling
- Transmissions of automotive equipment operating 
under the API service conditions quoted below. Use PVC, nitrile or other oil resistant gloves and
protective clothing to prevent skin contact. Where
Features & Benefits eye contact is a potential hazard, goggles should be
worn.
Bell Gear Oil 85W-140 is NOT recommended for
automotive synchromesh gearboxes or final drives Avoid temperatures above 80°C and strong oxidizing
where GL-4 oils with milder extreme pressure agents.
properties are recommended.
Ambient temperatures and atmospheric pressures
normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 29
@ 40°C mm2/s 420
Apparent Viscosity of 150 Pa.s °C -12 D2983
Viscosity Index 100 D2270 226
Pour Point °C -18 D97 15
Flash Point (COC) °C 220 D92 36
Load Carrying Capacity (FZG) kg >30 D2782 240
Density @ 20°C kg/m3 908 D4052 365

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005554 20L BN005553 210L BN005552

28
Gear Oil Limited Slip 80W-90

Bell Gear Oil Limited Slip 80W-90 is a premium quality, multipurpose gear lubricant containing sulphur-
phosphorus EP additives developed to meet the rigorous demands of commercial-fleet manual
transmissions, drive axles and final drives.

Application Product Specifications

This product is also suitable for similar components - API GL-5 LS


of farm and earth moving equipment and passenger - ZF TE-ML 05C
cars. When properly applied at the intervals - ZF TE-ML 12C
recommended by car manufacturers, this oil - ZF TE-ML 16E
complies with new car warranty requirements. - Arvin Meritor Axles

Bell Gear Oil Limited Slip 80W-90 is recommended Storage & Handling
for smooth efficient operation of limited slip (LS)
differentials. Use PVC, nitrile or other oil resistant gloves and
protective clothing to prevent skin contact. Where
Features & Benefits eye contact is a potential hazard, goggles should be
worn.
Bell Gear Oil Limited Slip 80W-90 has the following
features and benefits: Avoid temperatures above 80°C and strong oxidizing
agents.
- Resistance to high temperature oxidation
- Multipurpose capability minimizes misapplication Ambient temperatures and atmospheric pressures
- Protection against wear and scoring under all  normally encountered within buildings or roofed-over
operating conditions including high torque - shock outdoor storage areas are acceptable.
loading
- Protection against rust and corrosion in wet  Avoid entering areas where mists or vapours have
operating conditions built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
Bell Gear Oil Limited Slip 80W-90 is suitable for and protective clothing.
initial fill, top-up and refill of manual gearboxes,
gear-cases of semi-automatic transmission where
EP gear oils are recommended, as well as drive
axles and final drives of passenger cars, bakkies
trucks and earth moving, mine and farm equipment.

The exceptional chemical and thermal stability


of this oil permit its use at intermittent bulk oil
temperatures up to 150°C will appropriate drain and
refill schedules.
Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 15
@ 40°C mm2/s 145
Apparent Viscosity of 150 Pa.s °C -24 D2983
Viscosity Index 105 D2270 226
Pour Point °C -30 D97 15
Flash Point (COC) °C 205 D92 36
Load Carrying Capacity (FZG) kg >25 D2782 240
Density @ 20°C kg/m3 893 D4052 365

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005576 20L BN005575 210L BN005574

29
Gear Oil Limited Slip 85W-140

Bell Gear Oil Limited Slip 85W-140 is a premium quality, multipurpose gear lubricant containing
sulphur-phosphorus EP additives developed to meet the rigorous demands of commercial-fleet manual
transmissions, drive axles and final drives.

Application Product Specifications

This product is also suitable for similar components - API GL-5 LS


of farm and earth moving equipment and passenger - ZF TE-ML 05C
cars. When properly applied at the intervals - ZF TE-ML 12C
recommended by car manufacturers, this oil - ZF TE-ML 16E
complies with new car warranty requirements. - Arvin Meritor Axles

Bell Gear Oil Limited Slip 85W-140 is recommended Storage & Handling
for smooth efficient operation of limited slip (LS)
differentials Use PVC, nitrile or other oil resistant gloves and
protective clothing to prevent skin contact. Where
Features & Benefits eye contact is a potential hazard, goggles should be
worn.
Bell Gear Oil Limited Slip 85W-140 has the following
features and benefits: Avoid temperatures above 80°C and strong oxidizing
agents.
- Resistance to high temperature oxidation
- Multipurpose capability minimizes misapplication Ambient temperatures and atmospheric pressures
- Protection against wear and scoring under all normally encountered within buildings or roofed-over
operating conditions including high torque - shock outdoor storage areas are acceptable.
loading
- Protection against rust and corrosion in wet Avoid entering areas where mists or vapours have
operating conditions built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
Bell Gear Oil Limited Slip 85W-140 is suitable for and protective clothing.
initial fill, top-up and refill of manual gearboxes,
gearcases of semi-automatic transmission where EP
gear oils are recommended, as well as drive axles
and final drives of passenger cars, bakkies trucks
and earth moving, mine and farm equipment.

The exceptional chemical and thermal stability


of this oil permit its use at intermittent bulk oil
temperatures up to 150°C will appropriate drain and
refill schedules.
Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 40°C mm2/s 310
@ 100°C mm2/s 29
Viscosity Index VI 97 D2270 226
Pour Point, max °C -18 D97 15
Timken OK Load kg 18

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005588 20L BN005587 210L BN005586

30
Borate Oil

Bell Borate Transmission Oil is a multipurpose gear and transmission oil with borate-enhanced EP
properties. The special borate-based additive provides additional protection of gears against wear
(scoring, pitting, ridging, rippling), optimum friction coefficient as well as protection of the synchronizer
ring against wear.

Application Product Specifications

Bell Borate Oil is intended for: - Allison C-3 & C-4


- MASSEY FERGUSON M1110,
- tractor transmissions and hydraulic systems - Ford M2C134-A/B/C/D
- differentials equipped with wet brakes - API GL-4
- drive train systems - M1127, M1129A, M1135, M1141, M1143 -
- take-off clutches
- torque converters - RENAULT
- gear units of certain commercial and construction  - Caterpillar TO-2
vehicles - KUBOTA, DEUTZ, FIAT
- NEW HOLLAND: FNHA-2-C-210.00
Features & Benefits - White Farm Q-1826
- John Deere J20C
The Bell Borate Oil can serve as a replacement for - JJ Case MS 1207, MS 1210 -B6
all oils, other than engine oil, used in agricultural
tractors. Storage & Handling

It can be used in wet brake and many drive train Use PVC, nitrile or other oil resistant gloves and
applications and is specially formulated for good: protective clothing to prevent skin contact. Where
eye contact is a potential hazard, goggles should be
- chatter suppression worn.
- low temperature performance
- anti-foam properties Avoid temperatures above 80°C and strong oxidizing
agents.

Ambient temperatures and atmospheric pressures


normally encountered within buildings or roofed-over
outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Viscosity D445 71
@ 100°C mm2/s 14,76
@ 40°C mm2/s 99.84
Viscosity Index 154 D2270 226
Pour Point °C -30 D97 15
Flash Point (COC) °C 230 D92 36
Density @ 20°C kg/m3 888 D4052 365

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005581 20L BN005580 210L BN005579

31
Cone Lube

Bell Cone Lube is synthetic high performance oil particularly suited to gear applications requiring micro-
pitting resistance. The product is formulated with polyalphaolefins (PAO) base stocks in order to provide
performance greatly superior to conventional petroleum oils. The molecular structure of PAO resembles
that of high quality petroleum oils. Indeed, PAO fluids are fully compatible with petroleum base oils while
offering significantly improved load carrying ability, excellent wear and rust protection, high viscosity
index, high flash point, low pour point, outstanding oxidative stability, and cleaner running systems.

Application Product Specifications

Bell Cone Lube is particularly suited to gear ANSI/AGMA 9005(table 3)


applications operating under extreme service Cincinnati Machine P-74
conditions. The products are recommended for all David Brown S1.53.101
types of enclosed gear drives, bearings (including DIN 51.517 Part 3
plain rolling elements and anti-friction types. In Flenders GmbH as a High Micro Pitting Resistant
addition, applications requiring high micro-pitting Lubricant
resistance such as in Wind Turbine Gear Systems.
Storage & Handling
Features & Benefits
Use PVC, nitrile or other oil resistant gloves and
The specific formulation of Bell Cone Lube oil protective clothing to prevent skin contact. Where
ensures: eye contact is a potential hazard, goggles should be
- Excellent oxidation and thermal stability worn.
- High operating temperature range
- Lower maintenance costs Avoid temperatures above 80°C and strong oxidizing
- Excellent load carrying ability agents.
- Extended lubricant life
- Improved cleanliness Ambient temperatures and atmospheric pressures
- Compatible with most paints, gaskets, and seals normally encountered within buildings or roofed-
used with conventional petroleum based oils over outdoor storage areas are acceptable. Avoid
- Compatible with petroleum oils, therefore allowing entering areas where mists or vapours have built up
minimal effort to changeover as a result of abnormal temperatures or pressures
without the proper breathing equipment and
protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


ISO Grade 220
Viscosity D445 71
@ 100°C mm2/s 24.8
@ 40°C mm2/s 219.1
Viscosity Index 142 D2270 226
Pour Point
°C -54 D97 15
Flash Point °C 264 D92 36
Density @ 15°C kg/m3 899 D4052 365
Load Carrying Capacity (FZG) Stage >12 DIN 51354 334

Pack Size Part Number Pack Size Part Number

20L BN028425 210L BN028424

32
Brake Fluid

The Bell Brake Fluid DOT 4 complies with the National Compulsory Standard Specification for Hydraulic
Brake Fluids.

Application Product Specifications

- The DOT 4 product is intended for systems where  - SABS VC 8013


operating temperatures can rise to above 260°C - SAE J1703, J1704
but will not exceed 270°C - ISO 4925
- The grade number allocated to this product - U.S. Federal FMVSS No. 116 DOT 4
reflects the maximum permissible operating
temperature Storage & Handling
- This grade is a heavy duty product and is equally 
suitable for hydraulic clutch systems where Use PVC, nitrile or other product-resistant gloves
operating temperatures are generally below those and protective clothing in cases where frequent or
in brake systems prolonged skin contact cannot be avoided. Where
eye contact is a potential hazard, goggles or face
Features & Benefits shields should be worn.

- Bell Brake Fluid DOT 4 is not a mineral oil, but  Respiratory protection is not normally required but
somewhat toxic hydraulic fluids, blended from if an inhalation risk is present wear a half-mask
glycols and selected additives. Skin and eye respirator with an approved organic vapour cartridge
contact should be avoided. If swallowed obtain and particulate filter.
medical assistance. Avoid spillage onto vehicle
paintwork which can be damaged if left in contact Avoid elevated temperatures exceeding 100°C and
with the product. contact with mineral oils, water and other fluids
- The fluid is fully compatible with the natural rubber  Lined tanks should NOT be used for storage.
seals of automotive brake systems.
- The product is hygroscopic (absorb water) and Ambient temperatures and atmospheric pressures
should be replaced annually, especially in coastal normally encountered within buildings are
areas, to prevent rusting of components and acceptable.
possible brake failure due to water vapour in the
system. Containers must be kept tightly sealed. Avoid entering areas where mists or vapours have
built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Dry Equilibrium Reflux Boiling Point °C 270 4.1
Wet Equilibrium Reflux Boiling Point °C 170 D445 4.3
Kinematic Viscosity mm2/s D445 4.4
@ 100°C 2,3 D2983
@ -40°C 1100 D2270
Neutrality pH 8,0 D97 4.5

Pack Size Part Number

5L BN005559

33
Extended Life Coolant - Premix 50

Bell Extended Life Coolant Premix 50 is a nitrite-, amine-, phosphate-, silicate-, and borate-free coolant
based on ethylene glycol.
Application Product Specifications

Bell Extended Life Coolant - Premix 50 gives - ADE Antifreeze & Corrosion Inhibitors
outstanding protection against frost, corrosion and - Opel - Meets Requirements
overheating in all modern engines, but especially - Afnor - Meets Requirements
highly loaded aluminium engines. It effectively - Porsche - Meets Requirements
protects against corrosion and deposits in the - BMW - Meets Requirements
cooling system with its vital parts, the coolant - SAAB - Meets Requirements
channels in the block and cylinder head, the radiator, - British Standard BS 6580
the water pump and the heater core. - SABS 1251
- General Motors - Meets Requirements
Features & Benefits - Sasol S194
- MAN - Meets Requirements
It is recommended that the antifreeze in a cooling - Volkswagen TL 774
system be replaced annually. Before a cooling - Mercedes-Benz 325.3
system is filled with Bell Extended Life Coolant - Volvo - Meets Requirements
- Premix 50 it should be drained and thoroughly
flushed with clean water. Do not top up with plain Storage & Handling
water but use the same product as used for the
initial fill. Keep container tightly closed in a dry and cool
place. Ambient temperatures and atmospheric
DO NOT MIX DIFFERENT BRANDS OF pressures normally encountered within buildings or
ANTIFREEZE. roofed-over outdoor storage areas are acceptable.

Avoid entering areas where mists or vapours have


built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Bell Extended Life Coolant - Premix 50 has a shelf-


life of at least three years when stored in originally
closed, airtight containers at temperatures of
maximum 30oC.
For containers or container linings, use carbon steel
or stainless steel. Do not use Galvanized containers
because they may corrode.
Typical Characteristics

Property Units Typical ASTM


Appearance @ 20°C Clear Complies Visual
Hard Water Stability after 10 days stable, no precipitation Complies VW-PV 1426
Density @ 20°C g/cm3 1,122 - 1,125 ASTM D1122
pH Value 8,2 - 8,6 ASTM D1287
Refractive Index @ 20°C 1,432 - 1,436 DIN 51 423/2
Reserve Alkalinity ml, 0,1N HCL 8 - 11 ml ASTM D1287
Flash Point (COC) °C > 120 ASTM D92
Boiling Point °C > 160 ASTM D1120
Water Content % v/v 3,0 % max ASTM D1123

Corrosion Test: mg D1384
o Copper -0,8*
o Solder -1,2*
o Brass -0.9*
o Steel +0,1
o Cast Iron +1,3

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005613 20L BN005612 210L BN005611

34
Extended Life Coolant - Premix 50 N
Bell Extended Life Coolant - Premix 50 N is an engine coolant concentrate based on ethylene glycol.
It contains a hybrid corrosion inhibitor package with nitrites, salts of organic acids and silicates. Bell
Extended Life Coolant Premix 50 N is free from amines and phosphates.
Application Product Specifications
Bell Extended Life Coolant - Premix 50 N was Bell Extended Life Coolant Pre-mix 50 N meets
developed to protect car, truck and bus engines of the requirements of both the ASTM D3306 and BS
both ferrous and aluminium construction against 6580:1992 - standards. Bell Extended Life Coolant
corrosion and frost damage. It is recommended Premix 50 N also carries the following approvals:
as a year-round cooling system additive for all
water-cooled internal combustion engines. It offers - Mercedes-Benz
protection against: - DBL 7700.20, page 325.0
- John Deere
- damage as a result of coolant freezing during - JDM H24
inclement weather - MTU
- corrosion of the radiator, engine and other - MTL 5048
component surfaces exposed to the coolant - Leyland
- deposit formation that occurs when poor quality - BLS 22 AF.01
water is used, as Bell Extended Life Coolant - - Ford North America
Premix 50 N is premixed with treated water - WSS-M97B51-A1
- Chrysler
Features & Benefits - MS-9769
Bell Extended Life Coolant - Premix 50 N contains Storage & Handling
a blend of inhibitors designed to give a high degree
of corrosion protection to engine components such Use PVC, nitrile or other oil resistant gloves and
as radiators, cylinder block/heads and water pumps. protective clothing to prevent skin contact. Where
Due to its nitrite content this product is especially eye contact is a potential hazard, goggles should be
recommended for use in heavy duty engines. It worn. Avoid temperatures above 80°C and strong
is recommended that the antifreeze in a cooling oxidizing agents.
system be replaced annually. Before a cooling
system is filled with Bell Extended Life Coolant - Ambient temperatures and atmospheric pressures
Premix 50 N it should be drained and thoroughly normally encountered within buildings or roofed-over
flushed with clean water. Do not top up with plain outdoor storage areas are acceptable.
water but use the same product as used for the
initial fill. Avoid entering areas where mists or vapours have
built up as a result of abnormal temperatures or
DO NOT MIX DIFFERENT BRANDS OF pressures without the proper breathing equipment
ANTIFREEZE. and protective clothing.
Typical Characteristics
Property Units Typical ASTM
Appearance @ 20°C Clear Complies Visual
Hard Water Compatibility stable, no precipitation Complies Visual
Density @ 20°C g/cm3 1,131 - 1,133 ASTM D1122
pH Value 7,57 ASTM D1287
Refractive Index @ 20°C nD 1,435 - 1,438 DIN 51 423/2
Reserve Alkalinity, ml, 0,1N HCL 15 - 19 ml ASTM D1287
Flash Point (COC) °C > 120 ASTM D92
Boiling Point °C > 160 ASTM D1120
Freezing Point (50% vol. in water) °C <-37 ASTM D 1177
Water Content % v/v 3,0 % max ASTM D1123
Ash Content % m/m 2,0 % max ASTM D1119
Foaming characteristics m/ 3 s 50 max ASTM D1881
Corrosion Test: mg D1384
o Copper 0,0
o Solder -0.3*
o Brass 0.6
o Steel -0.3*
o Cast Iron 0.6
o Aluminium -2,4*

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005610 20L BN005609 210L BN005608

35
Grease - Multi Purpose

Bell Multi Purpose EP-2 is a dark-brown, multi purpose, extreme pressure, rust-inhibited, lithium hydroxy-
stearate based grease.

Application Product Specifications

Bell Multi Purpose EP 2 grease can be used - Brenco - Meets requirements


wherever an extreme pressure grease of this - Nsk - Meets requirements
type and grade is required or preferred and is - Rhp - Meets requirements
recommended for the long term lubrication of - Fag - Meets requirements
equipment operating within a temperature range of - Ntn - Meets requirements
-15°C to 120°C. Some of its usages include: - Skf - Meets requirements
- Koyo - Meets requirements
- general purpose automotive and chassis - Timken - 2891 & 5492
applications
- machine tool applications Storage & Handling
- industrial antifriction and plain bearings
Use PVC, nitrile or other product-resistant gloves
Bell Multi Purpose EP 2 grease should be used with and protective clothing in cases where frequent or
caution in automotive wheel bearings where peak prolonged skin contact cannot be avoided.
operating temperatures may exceed 120°C due to
heat transfer from adjacent disc brakes. Where eye contact is a potential hazard, goggles or
face shields should be worn.

Respiratory protection is not normally required under


normal conditions.

Avoid elevated temperatures and contact with water


and other fluids. Do not store in open containers.

Ambient temperatures and atmospheric pressures


normally encountered within buildings are
Typical Characteristics acceptable.

Property Units Typical ASTM IP


Worked Penetration 0,1 mm 280 D217 50
Drop Point °C, min 187 D566 132
NLGI 2
Load Carrying Capacity (FZG) Kg, min 27 D2509 240

Base Oil Properties (virgin):


Viscosity @ 40°C mm2/s 240 D445 71
Operating temperature, max °C -15 to +120
Flash Point (COC) °C 220 D92 36

Pack Size Part Number Pack Size Part Number Pack Size Part Number

2KG BN005768 15KG BN005568 50KG BN005567

36
Grease - Super Heavy Duty
Bell Super Heavy Duty grease is a high performance multi-purpose grease containing solid lubricants. It
is manufactured from solvent refined oils and it incorporates multi-functional extreme pressure additives
as well as rust/corrosion inhibitors, anti-oxidation additives and molybdenum disulphide. Its service
temperature range is between -30°C and 130°C.
Application Product Specifications

It is recommended for the long term lubrication of - SABS VC 300


industrial and automotive equipment where heavy
loading and/or shock loads are encountered and can Storage & Handling
be used for:
Use PVC, nitrile or other product-resistant gloves
- General purpose automotive and chassis and protective clothing in cases where frequent or
applications including fifth wheels, kingpins, prolonged skin contact cannot be avoided.Where
steering and universal joints. eye contact is a potential hazard, goggles or face
- Bulldozers, front-end loaders and other shields should be worn.
construction equipment.
- Mining equipment. Respiratory protection is not normally required under
- Other applications include Constant velocity joints  normal conditions.
(CVJ), machine tools, geared couplings at normal 
speeds, vibrating shafts and sliding mechanisms. Avoid elevated temperatures and contact with water
and other fluids.
Features & Benefits
Do not store in open containers.
Bell Super Heavy Duty Grease provides emergency-
run properties because of its molybdenum Ambient temperatures and atmospheric pressures
disulphide content, which plates out onto metal normally encountered within buildings are
surfaces to form a solid lubricating film that reduces acceptable.
friction and wear between lengthy re-greasing
intervals.

Typical Characteristics

Property Units Typical ASTM IP


Worked Penetration 0,1 mm 280 D217 50
Drop Point °C 180 D566 132
Water Washout @ 38°C % m/m 5 D1264
Working Stability (Pen.Change) % 10 D217 50
Timken OK Load
kg 33
Base Oil Properties (virgin):
Viscosity D445 71
@ 40°C mm2/s 350
Molybdenum Disulphide % m/m % m/m 3
Colour, visual Grey
Operating temperature range, °C °C -15 to 130

Pack Size Part Number Pack Size Part Number

15KG BN005601 50KG BN005600

37
Grease - Wheel Bearing

Bell Wheel Bearing is a multi-purpose lithium complex based grease developed for high temperature
and long-term performance in industrial and automotive applications. The grease possesses good
fretting corrosion protection, good water tolerance, resistance to water wash-out, and reliable corrosion
protection combined with excellent mechanical stability and good load-carrying capabilities. It contains
EP, Rust and Anti-oxidant additives.

Bell Wheel Bearing grease has a wide operating temperature range, -20°C and +150°C.

Application Storage & Handling

This product is suitable for grease-lubricated Avoid elevated temperatures (exceeding 100°C) and
bearings at low and high speeds including electric contact with water and other fluids. Do not store in
motors, automotive bearings and various anti- open or unlabelled containers.
friction bearings in the mining, petrochemical,
construction and steel industries. Store away from strong oxidising agents or
combustible material.
It has good pumpability properties and can be used
in centralized lubrication systems

Features & Benefits

Some of the benefits are:

- Good high temperature stability


- Extreme pressure capability
- Resistance to water washout
- Excellent rust and corrosion protection
- Long service life

Typical Characteristics

Property Units Typical ASTM IP


Worked Penetration 0,1 mm 265-295 D217 50
Drop Point °C, min >240 D566 132
NLGI 2
Timken O.K. Load, min Kg, >27
Colour, Visual
Brown
Base Oil Properties (virgin):
Viscosity @ 40°C mm2/s 200 D445 71
Operating temperature, max °C 150

Pack Size Part Number Pack Size Part Number

15KG BN005563 50KG BN005561

38
Grease - High Temperature

Bell High Temperature Synthetic Grease is a high temperature grease based on fully-synthetic esters and
hydrocarbons and a non-melting thickener system. It has excellent high temperature performance and
oxidation stability. It allows for the long-term lubrication of journal bearings and anti-friction bearings at
high working temperatures, high bearing loads and aggressive environmental conditions.

Application Storage & Handling

Bell High Temperature Synthetic grease is Avoid elevated temperatures (exceeding 100°C) and
recommended for lubrication of: contact with water and other fluids. Do not store in
open or unlabelled containers.
- Journal and anti-friction bearings in high
temperature applications Store away from strong oxidising agents or
- Fan bearings at the hot air stream combustible material.
- Re-heat and dry ovens
- Bearings exposed to hot and cold water as well as 
steam

Features & Benefits

Bell High Temperature Synthetic grease has the


following features and benefits:

- Good oxidation and thermal stability


- Excellent rust and corrosion protection
- Extended lubrication intervals and equipment life
- It also offers excellent mechanical stability

Typical Characteristics

Property Units Typical ASTM IP


Colour Visual Yellowish-white
Worked Penetration 0,1 mm 280 D217 50
Drop Point °C, min none D566 132
NLGI
2
Base Oil Properties (virgin):
Viscosity @ 40°C mm2/s D445 71
Operating temperature, max °C -20 to +220

Pack Size Part Number Pack Size Part Number

0.5KG BN005771 5KG BN005770

39
Cutter Bar Oil

Bell Cutter Bar Oil is formulated to meet the special requirements of cutter bar lubrication.

Application Storage & Handling

The combination of medium viscosity oil, tackiness, Use PVC, nitrile or other oil resistant gloves and
and anti-wear additives provide excellent protective clothing to prevent skin contact. Where
performance and wear protection. eye contact is a potential hazard, goggles should
be worn.Avoid temperatures above 80°C and strong
oxidizing agents.
Features & Benefits
Ambient temperatures and atmospheric pressures
Bell Cutter Bar Oil adheres strongly to metal normally encountered within buildings or roofed-over
surfaces due to its tacky nature and resists being outdoor storage areas are acceptable.
flung off from the cutter bar during operation.
Avoid entering areas where mists or vapours have
built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM


Viscosity @ 40°C cSt 150 D445
Flash point (COC) °C 252 D93
Pour Point °C °C -18 D97

Pack Size Part Number Pack Size Part Number Pack Size Part Number

5L BN005619 20L BN005618 210L BN005617

40
Machining Fluid

Bell Machining Fluid is a water-soluble metal working fluid for all cutting operations. The new bio-
balanced concept allows a nearly unlimited sump-life on the microbiological aspect and no addition of
bactericides and fungicides are necessary.

Through the usage of a new specially developed anti-foaming system this water-soluble metal working
fluid is especially suited for the application where the water hardness is low or very low.

Bell Machining Fluid is free of secondary amines, secondary amines releaser, nitrite, nitrite releaser,
organic chloride compounds, formaldehyde, formaldehyde releaser, PCB, PCT, PTBB and heavy metals.

Application Storage & Handling

Bell Machining Fluid is a universal product for all Use PVC, nitrile or other oil resistant gloves and
cutting operations such as: milling, drilling, turning. protective clothing to prevent skin contact. Where
It is resistant to hard water and has low tendency to eye contact is a potential hazard, goggles should be
foam formation when used in soft water. worn.

Features & Benefits Avoid temperatures above 80°C and strong oxidizing
agents.
- Excellent cutting performance
- Skin friendly due to a balanced pH-range Ambient temperatures and atmospheric pressures
(8.6 - 9.0) normally encountered within buildings or roofed-over
- No foaming even in very soft water outdoor storage areas are acceptable.
- Due to a selective bacteria flora no addition of 
Bactericides and fungicides are necessary Avoid entering areas where mists or vapours have
- Low consumption, as well as economical built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
and protective clothing.

Typical Characteristics

Property Units Typical ASTM IP


Appearance of concentrate Clear Brown
Appearance of emulsion ( 5 % ) Opaque -Transparent
PH value ( 3 % solution) 8.6 - 9.0
Refractometer @ 20°C 0.9 (Multiply)
Density @ 20°C kg/m3 0.950 D4052 365
Viscosity @ 40 °C cSt 60 D445

Recommended concentrations:
Grinding 4.5 - 5.5 %
Fine Cutting 5 - 7 %
Medium Cutting 7 - 9 %
Heavy Cutting 10 - 15 %

Pack Size Part Number

20L BN005614

41
Hand Cleaner

Bell Hand Cleaner is a gel / paste hand cleaner that contains specially selected abrasives that are soft on
the hands, yet remove grease and grime easily.

Application Storage & Handling

Apply Bell Hand Cleaner onto hands, rub hands to Bell hand cleaner may be stored in heavy duty
dissolve grease and grime. Rinse hands with water polyethylene drums.
and wipe dry with a towel.
Keep the container closed at all times.
Please ensure that the container lid is tightly closed
whilst not in use. Do not leave container exposed to Ensure that the product is used in a well ventilated
direct sunlight or excessive heat. area and that protective clothing is used when
handling the product.
Features & Benefits
Avoid entering areas where mists or vapours have
Bell Hand Cleaner has the following features: built up as a result of abnormal temperatures or
pressures without the proper breathing equipment
- Removes the heaviest grease and grime and protective clothing.
- Contains lanolin, which prevents drying of skin
- Will not block drains - dissolves completely
- Contains no petroleum solvents

Typical Characteristics

Property Typical
Density @ 20°C 1
Smell Lemon
Colour Yellow
pH 7.0-8.0

Pack Size Part Number Pack Size Part Number

5KG BN005615 0.5KG BN005616

42
Notes

43
Bell Product Range
MINING & CONSTRUCTION
B18E B25L L2106E PR754 HX240E
Articulated Dump Truck Articulated Dump Truck Wheeled Loader Dozer Excavator

B20E B30L L2606E PR764 HX270E


Articulated Dump Truck Articulated Dump Truck Wheeled Loader Dozer Excavator
B25E B33L L2706E 670G HX310E
Articulated Dump Truck Articulated Dump Truck Wheeled Loader Motor Grader Excavator

B30E 11m3 315SK 672G HX390E


Articulated Dump Truck Dumper Trailer Backhoe Loader Motor Grader Excavator
315SK Work Pro HX500E
B35D 12m 3
Backhoe Loader 770G
Articulated Dump Truck Bottom Dumper Trailer Motor Grader Excavator
914K R964C
B40D L1204E Loader 772G Excavator
Articulated Dump Truck Wheeled Loader Motor Grader
924K R974C
Tug Tractor Excavator
B45D L1506E 870G
Articulated Dump Truck Wheeled Loader 700J Motor Grader 2304E
Dozer Articulated Tractor
B50D L1706E 872G
Articulated Dump Truck Wheeled Loader 850J Motor Grader 2806E
Dozer Articulated Tractor

B60D L1806E PR744 HX230E 4206D


Articulated Dump Truck Wheeled Loader Dozer Excavator Articulated Tractor

SCREENS & CRUSHERS


J-1160 C-1540RS I-110RS 663 694+
Jaw Crusher Cone Crusher Impact Crusher Inclined Screener Inclined Screener

J-1170
Jaw Crusher C-1550 I-130 683 863
Cone Crusher Impact Crusher Inclined Screener Heavy Duty Screener
J-1175
Jaw Crusher
I-100 I-130RS 684 883
J-1480 Impact Crusher Impact Crusher Inclined Screener Heavy Duty Screener
Jaw Crusher

C-1540 I-110 595 693+ 984


Cone Crusher Impact Crusher Hydratrak Inclined Screener Horizontal Screener

ROADS & REHABILITATION


BT 65/4
Tamper BW 90 AD-5 & BW 120 AD-5 BW 211 & 212 BF 300 P & BF 600 P BC 672
Tandem Drum Roller Single Drum Roller Paver Refuse Compactor
BVP 18/45
Plate BW 138 AD-5 BF 800 P BC 772
Tandem Drum Roller BW 213
Paver Refuse Compactor
BPR 35/60 Single Drum Roller
Plate BW 151 AD-4 & BW 151 BC 462 MPH 122-2
BW 65 H Tandem Drum Roller Refuse Compactor Stabilizer/Recycler
BW 219
Pedestrian Roller BW 24RH Single Drum Roller MPH 125
BC 472
BW 75 H Pneumatic Tyred Roller Refuse Compactor Stabilizer/Recycler
Pedestrian Roller BW 27RH BW 226 BC 572 MPH 600
BW 55 E Pneumatic Tyred Roller Single Drum Roller Refuse Compactor Stabilizer/Recycler
Single Drum Roller

FORESTRY
125A TH302 Hauler Bell Timber Trailer 759J - JD 759JH - JD
Logger 2 Bunk 6x6 Rear Tip/Non Tip Sawlog Tracked Feller Buncher Tracked Harvester

225A TH302 Hauler Afri Tractor: 904, 1216, 1716


Logger 2 Bunk 4x4 2wd or 4wd Haulage Tractors 1710D & 1910D - JD 540G III - JD
Forwarder Cable Skidder
220E TC403 Long Range HX230E Excavator
Telelogger Forwarder 6x6 with Waratah Head
1270D - JD 548G III - JD
Wheeled Harvester Grapple Skidder
225E TC302 Long Range 643J - JD
Logger Forwarder 6x6 Wheeled Feller Buncher
703JH - JD 640H - JD
225HP Bell Tandem Timber 843J - JD Tracked Harvester Cable Skidder
Debarker Trailer Wheeled Feller Buncher

TH403 Hauler TC302 Long Range 753J - JD 753JH - JD 648H - JD


3 Bunk 6x6 Forwarder 4x4 Tracked Feller Buncher Tracked Harvester Grapple Skidder

AGRICULTURAL
2304E 1216A & 1216AF 125A 4cyl 120A 2,75T Wide Tandem
Articulated Tractor Rigid Tractor Cane Loader Rough Terrain Forklift Spillerbar Rig
2806E
Articulated Tractor
904A & 904AF 220A 220A 3,5T High Roll Bin
4206D Rigid Tractor Cane Loader Rough Terrain Forklift Tandem Rig
Articulated Tractor

1716A & 1716AF 125A 3cyl 220A Std Tandem Non-spill/bundle


Rigid Tractor Cane Loader Versalift Spillerbar Rig Tandem Rig

VERSATRUCK
Standard Bin Concrete Truck Timber Truck Scraper Tractor Jinker Trailer
(Standard Chassis) (Standard Chassis) (Extended Chassis) (Hauler Chassis-4x4) (Short Chassis-4x4)

Coal Bin Container Truck Hooklift Hauler with 5th Wheel Underground Concrete
(Standard Chassis) (Standard Chassis) (Extended Chassis) (Hauler Chassis-4x4) Mixer (Short Chassis-4x4)

Flat Deck Bottom Dumper Trailer


Low Profile Bin Flat Deck (Hauler Chassis-4x4) Timber Hauler
(Standard Chassis) (Extended Chassis) (Std Chassis-
(Standard Chassis)
Crane mounting)
Jinker Trailer Low Bed
Fire Truck Timber Truck (Hauler Chassis-4x4)
(Standard Chassis) (Extended Chassis) Waste Handler
(Standard Chassis) (Std Chassis-
Land Train-6 Trailers Crane mounting)
Water Tanker Waste Compactor Forestry Truck with Pup (Hauler Chassis-4x4)
(Standard Chassis) (Standard Chassis) Trailer (Extended Chassis) Timber Hauler
Hauler with 5th Wheel (Extended Chassis-
Ejector Bin Wood Chipper Lube Truck Crane mounting)
(Standard Chassis) (Extended Chassis) (Short Chassis-4x4)
(Standard Chassis)
Waste Handler
Lube Truck Coal Bin Tractor Short Dumper (Extended Chassis-
(Standard Chassis) (Extended Chassis) (Hauler Chassis-4x4) (Short Chassis-4x4) Crane mounting)
Broch/1416/08/13 - Lubricants Brochure Rev 6

BELL INTERNATIONAL: Tel: +27 (0) 35-907 9431


E-mail: marketing@bellequipment.com Web: www.bellequipment.com
Tel: +61 (0)8 9356 1033 Tel: +33 (0)5 55 89 23 56
Tel: +49 (0)6631 / 91 13 - 0 Tel: +7 495 287 80 02
Tel: +27 (0)11-928-9700 Tel: +34 91 879 60 19
Tel: +44 (0)1283 712862 Tel: +1 912 527 3309

Вам также может понравиться