Академический Документы
Профессиональный Документы
Культура Документы
S-TEC-03(IN-E017)
PRODUCT
Product Name: TEXT SPIN H (All viscosity grade)
Product Description: Base Oil and Additives
Product Code: S-TEC-02(IN-017)
Intended Use: High speed spindle bearing, Hydraulics system
COMPANY IDENTIFICATION
Supplier: Witcorp Products Ltd.
77/113 Sin Sathorn Tower, 27th Floor,
Krungthonburi Road, Klongtonsai,
Klongsan, Bangkok 10600
Thailand
Tel : 66-2440-0809
Fax : 66-2440-0830
Website: www.witcorp.co.th
HEALTH EFFECTS:
SWALLOWED: Harmful if swallowed-irritation to the stomach lining, feeling of
discomfort and possible nausea.
EYE: Mild irritant
SKIN: Mild irritant with prolonged or repeated contact.
INHALED: If mist and fumes generated-irritation to mucous membranes
and respiratory tract may occur.
INGREDIENTS CONCENTRATION
Highly refined petroleum oils Unspecified
Additives Unspecified
FIRE CLASSIFICATION: OSHA Classification (29 CFR 1910.1200): Not classified by OSHA
as flammable or combustible.
NFPA RATINGS: Health: 1 Flammability: 1 Reactivity: 0
EXTINGUISHING MEDIA: Use water fog, foam, dry chemical or carbon dioxide (CO2) to
extinguish flames.
PROTECTION OF FIRE FIGHTERS:
Fire Fighting Instructions: This material will burn although it is not easily ignited. For fires
involving this material, do not enter any enclosed or confined fire space without proper
protective equipment, including self-contained breathing apparatus.
Combustion Products: Highly dependent on combustion conditions. A complex mixture of
airborne solids, liquids, and gases including carbon monoxide, carbon dioxide, and
unidentified organic compounds will be evolved when this material undergoes combustion.
STORAGE & TRANSPORT: Store in a cool, dry area away from strong oxidants-no special
requirement for transport.
SPILLS & DISPOSAL: Contain spill with sand/ earth etc. Transfer back to containers
wash away residual-contact supplier for suitability for further
use.
FIRE/ EXPLOSION HAZARD: Not considered a hazard.
OTHER INFORMATION: Not considered hazardous under normal condition use.
OCCUPATAIONAL EXPOSURE LIMITS: Oil mist, mineral ACGIH TLV TWA: 5 mg/m3
Oil mist, mineral OSHA PEL TWA: 5 mg/m3
PERSONAL PROTECTION
Personal protective equipment (PPE) selections vary based on potential exposure
conditions such as handling practices, concentration and ventilation. Information on the
selection of eye, skin and respiratory protection for use with this material is provided below.
Eye Protection: Chemical Goggles, or Safety glasses with side shields
Skin Protection: Use protective clothing which is chemically resistant to this material.
Selection of protective clothing depends on potential exposure conditions and may include
gloves, boots, suits and other items. The selection(s) should take into account such factors as
job task, type of exposure and durability requirements.
MATERIAL SAFETY DATA SHEET
S-TEC-03(IN-E017)
WASTE DISPOSAL METHOD: Must comply with local, state and federal regulations.
If pre-treatment is needed, Chemical treatment or ultra
filtration may be used. Contact
WITCORP PRODUCT LTD.
Tech Line (0-2440-0809) for assistance.
MATERIAL SAFETY DATA SHEET
S-TEC-03(IN-E017)
The Information given here is offered in good faith as accurate, but without guarantee.
Conditions of use and suitability of the product for particular uses are beyond our control. The
user therefore assumes all risks of use of the product and we expressly disclaim all warranties
of every kind and nature, including warranties of merchantability and fitness for
a particular purpose in respect to the use or suitability of the product.