Академический Документы
Профессиональный Документы
Культура Документы
global.kawasaki.com/en/energy/equipment/gas_turbines/index.html
L30A
3 4
Baseload Model
BASELOAD
Basic Specifications
Engine
Engine Series
Series M1A
M1A Gas
Gas Turbine
Turbine Series
Series M5A
M5A Gas
Gas Turbine
Turbine Series
Series M7A
M7A Gas
Gas Turbine
Turbine Series
Series L20A
L20A Gas
Gas Turbine
Turbine Series
Series L30A
L30A Gas
Gas Turbine
Turbine Series
Series
Gas
Gas Turbine
Turbine Model
Model M1A-13A
M1A-13A M1A-13D
M1A-13D M1A-17
M1A-17 M1A-17D
M1A-17D M1T-13A
M1T-13A M1T-13D
M1T-13D M5A-01D
M5A-01D M7A-03
M7A-03 M7A-03D
M7A-03D L20A
L20A L30A
L30A
Gas
Gas Turbine
Turbine Generator
Generator Model
Model GPB15
GPB15 GPB15D
GPB15D GPB17
GPB17 GPB17D
GPB17D GPB30
GPB30 GPB30D
GPB30D GPB50D
GPB50D GPB80
GPB80 GPB80D
GPB80D GPB180D
GPB180D GPB300D
GPB300D
Maximum
Maximum Continuos
Continuos Electric
Electric Output
Output kWe
kWe 1,490
1,490 1,490
1,490 1,810
1,810 1,810
1,810 2,930
2,930 2,930
2,930 4,710
4,710 7,800
7,800 7,800
7,800 18,420
18,420 34,380
34,380
Heat
Heat Rate
Rate kJ/kWe-hr
kJ/kWe-hr 14,880
14,880 15,030
15,030 12,830 12.830 15,100
15,100 15,240 11,030 10,730 10,730 10,530
10,530 8,930
8,930
Thermal
Thermal Efficiency
Efficiency %
% 24.2
24.2 24.0
24.0 28.1
28.1 28.1
28.1 23.8
23.8 23.6
23.6 32.6
32.6 33.6
33.6 33.6
33.6 34.2
34.2 40.3
40.3
Exhaust
Exhaust Gas
Gas Temperature
Temperature 521
521 531
531 522
522 522
522 521
521 531
531 511
511 523
523 523
523 542
542 502
502
Exhaust
Exhaust Gas
Gas Mass
Mass Flow
Flow x1033 kg/hr
x10 kg/hr 29.1
29.1 28.8
28.8 29.1
29.1 29.1
29.1 58.2
58.2 57.6
57.6 62.6
62.6 97.9
97.9 97.9
97.9 215.3
215.3 333.3
333.3
NOx
NOx (0
(022 :: 15%)
15%) ppm
ppm -- 25
25 -- 99 // 15
15 -- 25
25 25
25 25
25 99 // 15
15 15
15 15
15
Approximate
Approximate Package
Package Dimension
Dimension (L,W,H)
(L,W,H) m
m 5.3
5.3 xx 1.65
1.65 xx 2.35
2.35 6.0
6.0 xx 1.85
1.85 xx 2.55
2.55 6.0
6.0 xx 2.4
2.4 xx 2.8
2.8 8.7
8.7 xx 2.6
2.6 xx 3.5
3.5 11.5
11.5 xx 2.8
2.8 xx 3.6
3.6 17.2
17.2 xx 3.5
3.5 xx 3.4
3.4 21.6
21.6 xx 6.2
6.2 xx 5.7
5.7
Approximate
Approximate Package
Package Weight
Weight (dry)
(dry) x1033 kg
x10 kg 11
11 11.5
11.5 22
22 55
55 58
58 131
131 250
250
Note: Mark "D" after Gas Turbine Model stands for Dry Low Emission
Condition : ISO Rating 1. Inlet Air Temperature : 15°C
4. Fuel Type : Natural Gas (100% CH4)
2. Atmospheric Pressure : 101.3 kPa
5. LHV of Fuel : 35.9 MJ/Nm3
3. Inlet / Exhaust Pressure Losses : No Duct Loss
M5A : The Standard Solution for Power Generation
GPB50D gas turbine generator package offers high
The Kawasaki GPB Series is designed for baseload applications, for both parallel operation with the grid
efficiency 5MW power utilizing Kawasaki M5A-01D
and island mode operation. In addition, the Kawasaki GPB Series are able to operate in Co-generation ser- gas turbine developed with the latest and proven
vice, with automatic operation capability supplying both electricity and heat (steam, hot water, direct heat) technologies.
by collecting waste heat with a heat recovery steam generator (HRSG), heat exchanger, or dryer, and in Its high performance provides the optimal solution
Combined Cycle with a steam turbine generator. With high total thermal efficiency, the Kawasaki GPB for power generation and co-generation.
Series are capable of highly efficient operation. GPB50D’s compact package design is also perfect for
renewal projects of existing facilities.
■ Gas Turbine Illustration
L30A
L30A : The World’s Most Efficient 30 MW Gas Turbine
In June 2012, Kawasaki introduced a new gas turbine named L30A as a flagship model
of its industrial gas turbine fleet. Based on Kawasaki’s well proven design technology,
Axial Compressor for
Features of Kawasaki Gas Turbine Baseload Model M7A, L20A & L30A Gas Turbine
this machine is said to be the most efficient 30 MW class gas turbine in the world,
1. Self-developed Gas Turbine Fully Made in Japan combined with very low emission output, high reliability and availability.
- Various lineup and reliable installation records all over the world. In addition, with its modular system design, the L30A has realized excellent
on-site maintainability. The L30A is able to provide a highly flexible
2. Very High Durability Industrial Gas Turbine solution for power generation and mechanial drive applications.
- Removable Combustor and Inspection holes on Turbine make the inspection easier.
3. Eco-friendly Ultimate Solution
40.3%
- Kawasaki Gas Turbine has DLE (Dry Low Emission) Combustor.
DLE Combustor reduces NOx significantly and cleans exhaust gas.
4. Various Type of Fuel Applicable
- Whichever fuel, city gas, LNG, Kerosene, light oil, A-type heavy oil, off gas can be selected .
5. Reliable After Service
- Reliable after service system is available, which satisfies customer’s requirement with spare engines
and parts supply system supported by well experienced service persons.
5 6
M1A Series Gas Turbine Generator Specifications
Site Condition for Normal Perfor
Elevation above sea level :0m
Inlet Air Temperature : 15 °C
Inlet Air Pressure Loss : 0.98 kPa
Exhaust Gas Pressure Loss : 2.45 kPa
LHV of Natural Gas Fuel : 35.9 MJ/Nm3
(100% CH4)
M1A
M1AGas
Gas Turbine
Turbine Series
Series M1A
M1AGas
Gas Turbine
Turbine Series
Series
M1A-17
M1A-17 M1A-17D
M1A-17D
GPB17
GPB17 GPB17D
GPB17D
1,450
1,450 1,090
1,090 730
730 1,450
1,450 1,090
1,090 730
730 2,850
2,850 2,140
2,140 1,430
1,430 2,850
2,850 2,140
2,140 1,430
1,430 1,755
1,755 1,315
1,315 875
875 1,755
1,755 1,315
1,315 875
875
kJ/kWe-hr
kJ/kWe-hr 15,130
15,130 16,500
16,500 19,750
19,750 15,280
15,280 16,660
16,660 19,900
19,900 15,350
15,350 16,800
16,800 20,190
20,190 15,510
15,510 16,960
16,960 20,370
20,370 13,120
13,120 14,370
14,370 17,320
17,320 13,120
13,120 14,370
14,370 17,320
17,320
524
524 441
441 368
368 534
534 448
448 374
374 523
523 441
441 370
370 534
534 449
449 375
375 526
526 443
443 377
377 526
526 443
443 377
377
28.8
28.8 29.2
29.2 29.6
29.6 28.5
28.5 29.0
29.0 29.4
29.4 57.6
57.6 58.5
58.5 59.2
59.2 57.0
57.0 58.0
58.0 58.8
58.8 28.8
28.8 29.4
29.4 29.9
29.9 28.8
28.8 29.4
29.4 29.9
29.9
5.0
5.0 3.8
3.8 2.8
2.8 5.1
5.1 3.9
3.9 2.8
2.8 9.9
9.9 7.6
7.6 5.6
5.6 10.2
10.2 7.8
7.8 5.7
5.7 5.0
5.0 3.9
3.9 2.9
2.9 5.0
5.0 3.9
3.9 2.9
2.9
79.2
79.2 73.6
73.6 65.4
65.4 79.7
79.7 74.2
74.2 66.1
66.1 78.8
78.8 73.3
73.3 65.2
65.2 79.3
79.3 73.9
73.9 65.9
65.9 80.4
80.4 75.4
75.4 67.5
67.5 80.4
80.4 75.4
75.4 67.5
67.5
1,620
1,620 1,450
1,450 1,120
1,120 1,630
1,630 1,450
1,450 1,116
1,116 2,945
2,945 2,850
2,850 2,210
2,210 2,950
2,950 2,850
2,850 2,190
2,190 2,050
2,050 1,755
1,755 1,305
1,305 2,050
2,050 1,755
1,755 1,305
1,305
kJ/kWe-hr
kJ/kWe-hr 14,690
14,690 15,130
15,130 16,880
16,880 14,810
14,810 15,280
15,280 17,140
17,140 15,150
15,150 15,350
15,350 17,209
17,209 15,290
15,290 15,510
15,510 17,475
17,475 12,460
12,460 13,120
13,120 14,930
14,930 12,460
12,460 13,120
13,120 14,930
14,930
516
516 524
524 547
547 526
526 534
534 559
559 485
485 523
523 547
547 492
492 534
534 559
559 511
511 526
526 560
560 511
511 526
526 560
560
30.9
30.9 28.8
28.8 25.2
25.2 30.7
30.7 28.5
28.5 24.8
24.8 62.1
62.1 57.6
57.6 50.3
50.3 61.7
61.7 57.0
57.0 49.7
49.7 31.5
31.5 28.8
28.8 24.4
24.4 31.5
31.5 28.8
28.8 24.4
24.4
5.2
5.2 5.0
5.0 4.8
4.8 5.3
5.3 5.1
5.1 4.9
4.9 9.4
9.4 9.9
9.9 9.5
9.5 9.6
9.6 10.2
10.2 9.7
9.7 5.2
5.2 5.0
5.0 4.7
4.7 5.2
5.2 5.0
5.0 4.7
4.7
76.5
76.5 79.2
79.2 82.4
82.4 77.8
77.8 79.7
79.7 82.8
82.8 73.4
73.4 78.8
78.8 82.1
82.1 75.7
75.7 79.3
79.3 82.5
82.5 78.6
78.6 80.4
80.4 83.0
83.0 78.6
78.6 80.4
80.4 83.0
83.0
M1A/T-13 Series Reduction Gear Box Enclosed Package M1A-17 Series Starting and Turning Motor System Enclosed Package
Standard Package Configuration - Epicyclic (M1A), Parallel (M1T) - Carbon Steel Common Base Frame Standard Package Configuration - Various Frequency Drive (VFD) - Carbon Steel Common Base Frame
- Output Speed : 1,500 / 1,800 rpm (50/60 Hz) - Outdoor Carbon Steel, Acoustic Enclosure - (Option : Air Starter, DC Motor) - Outdoor Carbon Steel, Acoustic Enclosure
M1A-13A Gas Turbine - Noise Level : 85 dBA at 1 m to the side of Enclosure M1A Gas Turbine - Turning Motor - Noise Level : 85 dBA at 1 m to the side of Enclosure
Starting and Turning Motor System - Industrial Single-Shaft
- Industrial Single-Shaft - Forced Ventilation Fan with Filter and Inlet Screen - Forced Ventilation Fan with Filter and Inlet Screen
- Various Frequency Drive (VFD) Lube Oil System
- Rotor Speed : 22,000 rpm - Maintenance Stage, Ladder, Beam (Option) - Rotor Speed : 22,000 rpm - Maintenance Stage, Ladder, Beam (Option)
- (Option : Air Starter, DC Motor) - Lube Oil : Synthetic Ester Oil
M1T-13 Gas Turbine Intake Silencer & Filter Compressor - Turbine Driven Main Lube Pump Intake Silencer & Filter
- Turning Motor - 2 Stage Centrifugal
- Twin M1A GT with Combined Gear Box - Painted Carbon Steel (Outer Skin and Structure) - Pre-Post Lube Pump - Painted Carbon Steel (Outer Skin and Structure)
Lube Oil System - Pressure Ratio : 10.5 (-17,-17D) - Air Cooled Oil Cooler with Temp. Control Valve - 2 Stage Filter with Insect Screen
Compressor - 2 Stage Filter with Insect Screen
- Lube Oil : Synthetic Ester Oil - IGV (-17D Option) - Water Cooled (Option) - Pulse Self Cleaning Filter (Option)
- 2 Stage Centrifugal - Pulse Self Cleaning Filter (Option)
- Turbine Driven Main Lube Pump Combustor - Integral Oil Reservoir - Noise Level : 85 dBA in front of Filter
- Pressure Ratio : 9.4 (-13A), 9.6 (-13D) - Noise Level : 85 dBA in front of Filter
- Pre-Post Lube Pump - Single Can Combustor - Simplex Filter (Option : Duplex Type)
- IGV (-13D Option) Exhaust Silencer and Stack (Option) Exhaust Silencer and Stack (Option)
- Air Cooled Oil Cooler with Temp. Control Valve - Single Ignition - Stainless Steel Piping : Down Stream of Filter
Combustor - Water Cooled (Option) Controls Controls
- Conventional Diffusion (-17) Generator
- Single Can Combustor - Integral Oil Reservoir : 210 liter (GPB15) - Microprocessor Based Programable Logic - Microprocessor Based Programable Logic
- Dry Low Emission (DLE) (-17D) - Continuous Duty Rating
- Single Ignition : 160 liter (GPB30) Controller (PLC) Controller (PLC)
- Applicable Fuel : Natural Gas, Diesel, Dual fuel
- Air Cooled Open Drip-Proof Construction
- Conventional Diffusion (-13A) - Simplex Filter (Option: Duplex Type) (CPU, Power Module : Option Redundant) (CPU, Power Module : Option Redundant)
- Steam Injection to Diffusion Combustor - Gas Turbine and Generator Control Turbine Water Cooled (Option) - Gas Turbine and Generator Control
Generator - 3 Stage Axial Turbine - 3 Phase, 3 Wire (Option 4 Wire)
(-13A Option) GT start / shutdown Control GT start / shutdown Control
- Continuous Duty Rating - Standard Voltage : 0.4 kV, 3.3 kV, 6.6 kV
- Dry Low Emission (DLE) (-13D) Speed / kW / Power Factor Control Coupling Shaft & Cover Speed / kW / Power Factor Control
- Air Cooled Open Drip-Proof Construction - Power Factor : 90% (Option 85%, 80%)
- Applicable Fuel : Natural Gas, Diesel, Dual Fuel Auto Synchronizing and Auto Sharing - Flexible Coupling with Shear Pin and Cover Auto Synchronizing and Auto Sharing
Water Cooled (Option) - Bearing : Ball (Roller) Bearing
(-13A) - Touch Panel Operation - Touch Panel Operation
- 3 Phase, 3 Wire (Option 4 Wire) Reduction Gear Box
Turbine GPB17 7P - Industrial Ethernet - Lubrication : Grease Pack - Industrial Ethernet
- Standard Voltage : 3.3 kV, 6.6 kV - Epicyclic - IEC Standard, Class F Insulation with F rise
- 3 Stage Axial Turbine - Power Factor : 90% (Option 85%, 80%) - Remote Monitoring (Option) - Output Speed : 1,500 / 1,800 rpm (50/60 Hz) - Remote Monitoring (Option)
Graphics Monitoring - Exciter : Diverted Field Brushless (Option PMG) Graphics Monitoring
Coupling Shaft & Cover - Bearing : Ball (Roller) Bearing
- Lubrication : Grease Pack Historical Trend & Event Logger Historical Trend & Event Logger
- Flexible Coupling with Shear Pin and Cover
- Exciter : Diverted Field Brushless (Option PMG) Daily and Monthly Reports Daily and Monthly Reports
GPB17 Typical Package Outlook : m GPB17 Typical Layout : m
1.9
(Reference) (Reference) 16.0
3.0
2.1
GAS TURBINE
GENERATOR SET
Air Intake Filter
4.6
10.0
11.0
GAS VALVE UNIT
2.6
5.0
HRSG FEED GAS COMPRESSOR
WATER PUMP
0.1 6.0 1.1 0.5 1.9 1.0
7 8
M5A Series Gas Turbine Generator Specifications M7A Series Gas Turbine Generator Specifications
Site Condition for Normal Perfor Site Condition for Normal Perfor
Elevation above sea level :0m Elevation above sea level :0m
Inlet Air Temperature : 15 °C Inlet Air Temperature : 15 °C
Inlet Air Pressure Loss : 0.98 kPa Inlet Air Pressure Loss : 0.98 kPa
Exhaust Gas Pressure Loss : 2.94 kPa Exhaust Gas Pressure Loss : 2.94 kPa (GPB80/80D)
LHV of Natural Gas Fuel : 35.9 MJ/Nm3 LHV of Natural Gas Fuel (100% CH4) : 35.9 MJ/Nm3
(100% CH4)
GPB80D
- Carbon Steel Common Base Frame Turbine
- Parallel Shaft Historical Trend & Event Logger - Standard Voltage : 3.3 kV, 6.6 kV, 11.0 kV - Serial Link User Interface (Option)
- Painted Carbon Steel Acoustic Enclosure - 4 Stage Axial Turbine
Daily and Monthly Reports - Power Factor : 90% (Option 85%, 80%) - Remote Monitoring (Option)
- Noise Level : 85 dBA at 1 m to the side of Enclosure
Coupling Shaft & Cover - Bearing : Sleeve Type, Oil Bath Lubrication Graphics Monitoring
- Forced Ventilation Fan with Filter
- Flexible Coupling with Shear Pin and Cover - Exciter : Diverted Field Brushless (Option PMG) Historical Trend & Event Logger
- Maintenance Stage, Ladder, Beam (Option)
Daily and Monthly Reports
GPB50D Typical Package Outlook : m GPB50D Typical Layout : m GPB80 Typical Package Outlook : m GPB80 Typical Layout : m
(Reference) (Reference) (Reference) 4.0 3.3 (Reference)
23.5 26.0
GENERATOR SET
15.0
Ventilation
GAS VALVE UNIT FEED WATER
Exhaust
13.5
3.4
3.5
Turbine Ventilation
Exhaust Intake
9 10
L20A Series Gas Turbine Generator Specifications L30A Series Gas Turbine Generator Specifications
Site Condition for Normal Perfor Site Condition for Normal Perfor
Elevation above sea level :0m Elevation above sea level :0m
Inlet Air Temperature : 15 °C Inlet Air Temperature : 15 °C
Inlet Air Pressure Loss : 0.98 kPa Inlet Air Pressure Loss : 0.98 kPa
Exhaust Gas Pressure Loss : 3.43 kPa (GPB180/180D) Exhaust Gas Pressure Loss : 3.43 kPa(GPB300/300D)
LHV of Natural Gas Fuel : 35.9 MJ/Nm3 LHV of Natural Gas Fuel : 35.9 MJ/Nm3
(100% CH4) (100% CH4)
L20A Series Starting and Turning System Intake Silencer & Filter L30A Series Starting and Turning System Intake Silencer & Filter
- Various Frequency Drive (VFD) - Painted Carbon Steel (Outer Skin and Structure) Standard Package Configuration - Various Frequency Drive (VFD) - Painted Carbon Steel (Outer Skin and Structure)
Standard Package Configuration
Lube Oil System - Stainless Steel Inner Punching Metal Sheet Lube Oil System - Stainless Steel Inner Punching Metal Sheet
L20A Gas Turbine - 3 Stage Filter with Insect Screen L30A Gas Turbine - 3 Stage Filter with Insect Screen
- Lube Oil : Turbine Oil ISO VG32 (optional VG46) - Lube Oil : Turbine Oil ISO VG32 (optional VG46)
- Industrial Single-Shaft - Pulse Type Self Cleaning Filter (Option) - Industrial Twin-Shaft - Pulse Type Self Cleaning Filter (Option)
- Turbine Driven Main Lube Oil Pump - Motor Driven Main Lube Oil Pump
- Rotor Speed : 9,420 rpm - Noise Level : 85 dBA at 1 m to Filter inlet - Power Turbine Rotor Speed : 5,600 rpm - Noise Level : 85 dBA at 1 m to Filter inlet
- Pre-Post Lube Oil Pump - Standby Lube Oil Pump
Compressor - Emergency Lube Oil Pump Exhaust Silencer Stack (Option) Compressor - Pre-Post Lube Oil Pump Exhaust Silencer Stack (Option)
- 11 Stage Axial Flow - Water Cooled Oil Cooler with Temp. Control Valve - 14 Stage Axial Flow - Emergency Lube Oil Pump
Controls Controls
- IGV & 4 Stage VSV - Oil Reservoir integrated with Baseplate : 5,900 liter - IGV & 4 Stage VSV - Water Cooled Oil Cooler with Temp. Control Valve
- Microprocessor Based Programable Logic - Microprocessor Based Programable Logic
Combustor - Stainless Steel Piping : Down Stream of Filter Controller (PLC) Combustor - Oil Reservoir integrated with Baseplate : 11,700 liter Controller (PLC)
- 8 Can Combustors - Filter (CPU, Power Module : Option Redundant) - 8 Can Combustors - Stainless Steel Piping : Down Stream of Filter (CPU, Power Module : Option Redundant)
- Dual Ignition System - Oil Vapor Fan - Gas Turbine and Generator Control - Dual Ignition System - Duplex Full-flow Filter - Gas Turbine and Generator Control
- Conventional Diffusion (GPB180) Generator GT start / Shutdown Control - Conventional Diffusion (GPB300) - Oil Vapor Fan GT start / Shutdown Control
(Option De-NOx : Steam Injection) - Continuous Duty Rating Speed / kW / Power Factor Control (Option De-NOx : Steam Injection) Generator Speed / kW / Power Factor Control
- Dry Low Emission (DLE) (GPB180D) - 3 Phase, 3 Wire (Option 4 Wire) Auto Synchronizing and Auto Sharing - Dry Low Emission (DLE) (GPB300D) - Continuous Duty Rating Auto Synchronizing and Auto Sharing
- Applicable Fuel : Natural Gas, - Voltage : 6.6 kV, 11.0 kV - Touch Panel Operation - Applicable Fuel : Natural Gas - 3 Phase, 3 Wire (Option 4 Wire) - Touch Panel Operation
Diesel (Standby Only) Dual Fuel - Power Factor : 90% (Option 85%, 80%) - Serial Link User Interface (Option) Turbine - Voltage : 11 kV - Serial Link User Interface (Option)
Turbine
- 3 Stage Axial Turbine
- IEC Standard, Class F Insulation with F rise
- Exciter : Brushless PMG
- SCADA System (Option)
- Redundant Control System (Option)
- Gas Generator Turbine : 2 Stage Axial Turbine
- Power Turbine : 3 Stage Axial Turbine GPB300 - Power Factor : 90% (Option 85%, 80%)
- IEC Standard, Class F Insulation with F rise
- SCADA System (Option)
- Redundant Control System (Option)
Coupling Shaft & Cover Enclosed Package - Remote Monitoring (Option) Coupling Shaft & Cover - Exciter : Brushless PMG - Remote Monitoring (Option)
- Flexible Coupling with Shear Pin and Cover - Carbon Steel Common Base Frame Graphics Monitoring - Flexible Coupling with Shear Pin and Cover Enclosed Package Graphics Monitoring
- Painted Carbon Steel Acoustic Enclosure Historical Trend & Event Logger (Reduction Gear and Generator connection) - Carbon Steel Common Base Frame Historical Trend & Event Logger
Reduction Gear Box
- Noise Level : 85 dBA at 1 m to the side of Enclosure Daily and Monthly Reports - Painted Carbon Steel Acoustic Enclosure Daily and Monthly Reports
- Parallel Shaft Reduction Gear Box
- Forced Ventilation Fan with Filter - Parallel Shaft - Noise Level : 85 dBA at 1 m to the side of Enclosure
GPB180
- Maintenance Stage, Ladder, Beam (Option) - Forced Ventilation Fan with Filter
- Maintenance Stage, Ladder, Beam (Option)
GPB180 Typical Package Outlook : m GPB180 Typical Layout : m GPB300 Typical Package Outlook : m GPB300 Typical Layout : m 40.0
(Reference) (Reference) (Reference) (Reference)
42.0 Ventilation Turbine
Air Inlet Air Inlet
COOLING TOWER AIR COMPRESSOR & TANK
12.0
ELECTRICAL ROOM
GAS COMPRESSOR
G/T Intake COOLING TRANSFORER
Air Inlet WATER CONTROL ROOM YARD
Enclosure AIR COMPRESSOR & TANK
Vent.Air Outlet PUMP Ventilation HRSG FEED WATER
Exhaust TANK
FEED
PUMP
25.0
50.0
PUMP
HRSG FEED WATER
8.9
G/T Exhaust
4.7
4.9
Gas Outlet
3.5
0.5
11 12
Standby Model Introduction Standby Model ( GPS Series )
Excellent Features of Standby generator sets must start and supply power in the event of the loss of power from the utility.
These functions depend greatly on the prime-mover of the standby system. Starting and providing power
Kawasaki Standby Gas Turbine Generators Sets are often more important than financial conditions such as the initial cost of equipment.
Kawasaki standby GPS Series are suitable for standby power supply when utility power fails.
Kawasaki has installed over 7,000 Standby Gas Turbine Generator Sets rated from 200 kVA to 6,000 kVA All the models are designed for automatic operation ( start/power supply/stop ) and equipped with
worldwide. The reliability of Kawasaki Standby Gas Turbine Generator Sets has allowed to install in alarm/protection systems.
Internet Data Centers, Hospitals, and Key Facilities where uninterrupted power is certainly required.
Basic Specifications
- High Performance, and very reliable, with the low cost gas turbine solution
- Easy Maintenance
- Dual Fuel Capability
- Low Noise Operation
- Low Vibration
- No Cooling Water
- High Starting Reliability, and quick start
- Light Weight, and space saving, easy transportation and installation
- Clean Exhaust Gas
- Excellent frequency control, even with large step loads
13 14
Mobile / Trailer Model ( MGP / TGP Series )
Kawasaki MGP/TGP Series are gas turbine generators mounted on trucks or trailers for mobile Basic Specifications
application. MGP/TGP integrate all necessary equipment and enable fully automatic operation without
the need for external power supply. High durability against vibration and shock, and reliable operation
are important for this application. Kawasaki MGP/TGP is designed to fully meet such demands.
Advantages
1. Developed with Vast Field Experience 3. Compact Integration
Gas Turbines on trucks or trailers need to withstand large MGP/TGP incorporate all necessary equipment, including
vibration/shock when the trucks run on roads. fuel tank, batteries, exhaust silencer, cable reel, etc.,
Kawasaki meets mobile installation condition with gas inside a compact aluminum enclosure.
turbines experience and technology from Kawasaki aircraft This feature enables easy maintenance.
jet engines operating under similar severe environmental
conditions. 4. Blackout Start Capability
MGP/TGP can start up and supply electricity without any
2. Low Center of Gravity and Large Tumble-down Angle external utility supply, such as electric power and fuel.
Thanks to light weight of gas turbines, the center of gravity of
MGP/TGP is low, and this makes it possible to have stable
maneuverability.
(Note)
* 1 : Output : Up to 40°C of ambient temp., 150 m above sea level.
■ Installation Example
TGP3000 MGP1250
MGP2000 MGP2000
15 16
Kawasaki Techno-Net Installation Examples
Full Time Support Kawasaki Gas Turbine has been installed to....
Maintenance Management ● Data Center ● Paper Mill ● Hospital
Predictive services based on trending data and asset maintenance management ● Food Process ● College Campus ● Oil & Gas
What to do When to do it How to do it Who's to do it ● Tire Manufacturer ● District Heat & Cooling AND MORE !!!
Improvement of Availability and Quality of Maintenance In 2010 Kawasaki accumulated 10,000th Kawasaki Gas Turbine Engines
Minimum down time and good quality with adequate maintenance strategies and execution. in all over the world !!!
Remote Maintenance System by a GT Expert
Proven effectiveness by most Kawasaki remote maintenance users
Fleet wide analysis
Internet / Intranet
The Kawasaki World Business Center in the USA, Germany, Malaysia, China, Korea and Japan are connected
by the Internet and by the KHI intranet to monitor gas turbines remotely and globally.
Attended monitoring
All system data is monitored and recorded hourly, as well as all start signals and first out malfunction signals.
Predictive and preventative maintenance is accomplished by analysis of thermal cycles and unit vibration.
17 18